PEMANFAATAN AMPAS KOPI SEBAGAI MATERIAL DASAR UNTUK MEMBUAT POT TANAMAN
DOI:
https://doi.org/10.22441/narada.2023/v10.i3.003Keywords:
Coffee dregs, Product design, Material eksploration, Ornamental plant potAbstract
As the culture of drinking coffee strengthens in various circles of Indonesian society, the amount of residual dregs produced from brewing coffee drinks is also increasing. The main objective of this design process is to find the right mixture composition to reprocess coffee grounds so that they can be used as a basic material for making ornamental plant pots. In finding the right dough composition, this design was carried out through a material exploration approach by mixing several other binders with coffee grounds. After going through 30 trials involving several ingredients such as coffee grounds, starch, vinegar, glycerol, water, jelly, and PVA (Polyvinyl Alcohol), this experiment succeeded in getting the right and ideal composition with characteristics resembling clay and easy to use. molded and does not crack easily when dry. As a result, this design process succeeded in producing an initial product in the form of a small plant pot for ornamental plants made from the dregs left over from brewing coffee drinks. This ornamental plant pot product is an initial stage product which at the next design stage can be developed into a more complex and attractive product.
Downloads
References
Andry & Sachari, A. (2015). Eksplorasi Material Berbasis Permainan Sebagai Pendekatan Berkreasi. Panggung, 25(3) p.292-304.
DOI:https://doi.org/10.26742/panggung.v25i3.25
Badan Pusat Statistik Indonesia. (2023). “Statistik Kopi Indonesia 2022” dalam Badan Pusat Statistik Indonesia, 30 November 2023. Diambil dari https://www.bps.go.id/id/publication/2023/11/30/abde293e6c0fc5d45aaa9fe8/statistik-kopi-indonesia-2022.html
Brown, M. E. (2016). Introduction to thermal analysis: Techniques and applications (2nd ed.). Springer International Publishing.
Callister, W. D., & Rethwisch, D. G. (2017). Materials science and engineering: An introduction (10th ed.). John Wiley & Sons.
Choi, S. E., Kim, K. H., Cho, Y. K., & Yoon, Y. (2019). Utilization of coffee ground waste as a source of adsorbent: Its adsorption behavior on heavy metals in aqueous solution. Journal of Cleaner Production, 228, 1363–1372.
Figueiredo, T. R., Rocha, M. V. P., Sousa, L. C., & Braga, R. M. (2021). Coffee dregs as a source of bio-based materials: A review. Journal of Cleaner Production, 311.
Hollas, J. M. (2004). Modern spectroscopy. John Wiley & Sons.
Karim, M. R., Mahmood, H., Ahmaruzzaman, M., & Islam, M. A. (2019). Biochar production from coffee waste: A comprehensive review. Journal of Cleaner Production, 232, 131–144.
Lee, S. M., Kim, S. H., Kim, N. J., & Lee, C. S. (2014). Effect of carbon fiber content on the mechanical properties and microstructure of Mg-Al-SiC composites fabricated by stir casting. Journal of Alloys and Compounds. 613, 253–258.
DOI:https://doi.org/10.1016/j.jallcom.2014.05.174
Maulana, M., Anggaraini, D., Yofinaldi, S., & Wirayuda, R. (2023). Pemanfaatan Limbah Ampas Kopi menjadi Pupuk Organik. Jurnal Sains Teknologi Dalam Pemberdayaan Masyarakat, 4(1), 9–14.
DOI:https://doi.org/10.31599/jstpm.v4i1.1631
Nurhayati, E., Hadiyanto, H., Pratama, A. B., & Widodo, S. (2020). Pemanfaatan Ampas Kopi Sebagai Bahan Baku Pembuatan Bioetanol.. Jurnal Kimia Sains Dan Aplikasi, 23(3), 80–87.
Prabawati, S. Y., Widiakongko, P. D., & Taqwim, M. A. (2023). Activated Charcoal from Coffee Dregs Waste as an Alternative Biosorbent of Cu(II) and Ag(I). Indonesian Journal of Chemistry, 23(4), 1120–1128.
DOI:https://doi.org/10.22146/ijc.83269
Reimer, L., & Kohl, H. (2008). Transmission electron microscopy: Physics of image formation and microanalysis (5th ed.). Springer Science & Business Media.
Rochmah, H. F., Kresnanda, A. S., & Asyidiq, M. L. (2021). Pemanfaatan Limbah Ampas Kopi Sebagai Upaya Pemberdayaan Petani Kopi di CV Frinsa Agrolestari, Bandung, Jawa Barat. Jurnal Sains Terapan : Wahana Informasi Dan Alih Teknologi Pertanian, 11(2), 60–69.
DOI:https://doi.org/10.29244/jstsv.11.2.60-69
S. Amr, M., El-Baz, & S. El-Henawy. (2013). Coffee waste as a potential source for the production of soaps. Journal of Cleaner Production, 47, 109–114.
Skoog, D. A., West, D. M., Holler, F. J., & Crouch, S. R. (2014). Fundamentals of analytical chemistry (9th ed.). Cengage Learning.
Tawfik, A., El-Zawawy, W. K., Khalil, A. A., & Youssef, A. M. (2015). Utilization of coffee dregs for production of highly porous ceramics with tailored microstructure. Journal of Materials Science, 50(2), 980–994.
Downloads
Published
How to Cite
Issue
Section
License
A writer who will publish their article in the NARADA Journal of Design and Art agrees to the following conditions:
- The author owns the copyright and grants the rights to NARADA Journal of Design and Art as the party entrusted with publishing the article for the first time simultaneously licensed under the "Creative Commons Attribution-ShareAlike 4.0" License. This makes it possible for other people to share the work with a form of acknowledgment of authorship of the work and initial publication in this journal according to the authorship of the article provided.
- Authors may enter into separate additional contractual agreements for non-exclusive distribution of the published journal version of the work (e.g., posting it to an institutional repository or publishing it in a book) with acknowledgment of initial publication in the NARADA Journal of Design and Art.
- Authors are permitted and asked to post their work online (for example, institutional repositories or on personal websites) after the article publication process. This avoids double publication or multiple submissions which will affect the similarity of writing of the published work.
- In order to maintain the value of originality and similarity of articles sent or submitted. Authors are asked to temporarily remove or hide the original article from other online systems until they receive the results and decisions from the NARADA Journal of Design and Art regarding the decision to publish the article.
- The author, in this case the contributing author (Contributor Author), will be sent a form or letter stating the validity of the scientific work, signed on an IDR 10,000 stamp. Then the author will be asked to send the email to [email protected].
Pemberitahuan Hak Cipta
Seorang penulis yang akan menerbitkan artikelnya dalam NARADA Jurnal Desain dan Seni setuju dengan ketentuan berikut:
- Penulis memiliki hak cipta dan memberikan hak kepada pihak NARADA Jurnal Desain dan Seni sebagai pihak yang diberikan kepercayaan untuk mempublikasi artikelnya pertama kali secara bersamaan dilisensikan di bawah Lisensi "Creative Commons Attribution-ShareAlike 4.0". Hal ini memungkinkan kepada orang lain untuk membagi karya dengan bentuk pengakuan kepengarangan karya dan publikasi awal dalam jurnal ini sesuai dengan penulisan artikel yang diberikan.
- Penulis dapat membuat perjanjian kontrak tambahan yang terpisah untuk distribusi non-eksklusif versi jurnal yang diterbitkan dari karya tersebut (misalnya, mempostingnya ke repositori institusional atau menerbitkannya dalam sebuah buku) dengan pengakuan publikasi awal dalam NARADA Jurnal Desain dan Seni.
- Penulis diizinkan dan diminta untuk mempostingkan karyanya secara online (semisal, repositori institusional atau di situs web pribadi) setelah proses penerbitan artikel, Hal ini menghindari adanya double publikasi atau pengajuan jamak yang akan berpengaruh kepada adanya kesamaan penulisan dari karya yang diterbitkan.
- Demi menjaga nilai orisinalitas dan nilai kesamaan dari artikel yang dikirim atau diajukan. Penulis diminta untuk menghilangkan atau menyembunyikan secara sementara artikel orisinil dari sistem online lain yang sampai mendapatkan hasil nilai dan ketetapan dari pihak NARADA Jurnal Desain dan Seni mengenai keputusan publikasi dari artikel.
- Penulis dalam hal ini penulis kontributor (Contributor Author) akan dikirimkan form atau surat pernyataan keabsahan karya ilmiah, yang ditanda tangani di atas materai 10000. Dan selanjutnya penulis diminta untuk mengirimkan ke email [email protected].
