Perhitungan faktor utilitas baterai pesawat dengan menggunakan metode sistem dinamis untuk mengukur tingkat ketersediaan baterai
DOI:
https://doi.org/10.22441/oe.2022.v14.i1.041Kata Kunci:
dynamic systems, preventive maintenance, utility factor, aiicraftAbstrak
The role of the aircraft maintenance industry as an aircraft maintenance service which is expected to be able to maintain the survival of the aircraft itself. For example, PT GMF Aero Asia is one of the Strategic Business Units (SBU) owned by PT Garuda Indonesia which is specialized in aircraft maintenance, repair and overhaul services which include aircraft frames, engines, components and their support. In this study, a quantitative assessment of the availability and capability of maintenance facilities was carried out using a preventive maintenance method with a dynamic system model approach that describes the level of availability and maintenance capability of aircraft batteries. Calculations have been made with a computer program, POWERSIM, in actual conditions that in December 2020 the total number of batteries in maintenance was 102 batteries for Airbus types and 80 batteries for Airbus types. With the assumption that starting in 2021 there will be an increase in the number of aircraft by 1 (one) unit per month, then at the end of the study period until July 2021 the calculation of the utility factor will be as follows, the total utility factor for Boeing is still below 1, while for Airbus starting April 2021 the utility factor is above 1. So that the operator's ability to handle Airbus type battery maintenance is not sufficient. For this purpose, an alternative scenario needs to be created, namely scenario 1 by adding one operator per shift and scenario 2 by increasing the operator's workload in handling the number of batteries handled to as many as 6 battery units. The results of the calculation of the utility factor show that in both conditions the scenario gives a value below 1. The best choice in terms of simplicity in handling the number of operators, then the choice of condition scenario 2 is the best choice.
Unduhan
Referensi
Badan Pusat Statistk. (2019). Data Penumpang Bandara di Indonesia. https://www.bps.go.id/indicator/17/66/2/jumlah-penumpang-pesawat-di-bandara-utama.html (Accessed: 15/05/2022)
Basirat, P., Fazlollahtabar, H., & Mahdavi, I. (2013). System dynamics meta-modelling for reliability considerations in perawatan. International Journal of Process Management and Benchmarking, 3(2), 136-153. https://doi.org/10.1504/IJPMB.2013.057723
Hutagalung, A.O., & Hasibuan, S. (2019). Determining the Priority of Medical Equipment Maintenance with Analytical Hierarchy Process. International Journal of Online & Biomedical Engineering, 15(10), 107-120
Prabowo, H.A., & Agustiani, M. (2018). Evaluasi Penerapan Total Productive Maintenance (TPM) Melalui Pendekatan Overall Equipment Effectiveness (OEE) untuk Meningkatkan Kinerja Mesin High Speed Wrapping di PT. TES. Penelitian dan Aplikasi Sistem dan Teknik Industri, 12(1), 50-62.
Rizkiyah, N.D, Sitorus, T.M, Junaedi, D., Amaludin, A. (2020). Perhitungan Biaya Pengeluaran Proyek Pemasangan Skid Injeksi Aditif dan Pewarna pada Tangki Bahan Bakar Minyak terhadap Waktu Penyelesaian dengan Metoda Sistem Dinamis. Jurnal PASTI, Penelitian dan Aplikasi Sistem dan Teknik Industri,12(3), pp.282-292. https://dx.doi.org/10.22441/pasti.2020.v14i3.006
Satrio, P., & Suryani, E. (2017). Penerapan Model Sistem Dinamik Untuk Melakukan Pemeliharaan Operasional Aset Unit Transmisi Dan Visualisasi Luaran Model Dengan Menggunakan Dashboard (Studi Kasus: PT. Pln (Persero) App Semarang). Jurnal Teknik ITS, 6(2), A325-A330.
Setiawan, I. (2021). Integration of Total Productive Maintenance and Industry 4.0 to increase the productivity of NC Bore machines in the Musical Instrument Industry. Proceedings of the 11th Annual International Conference on Industrial Engineering and Operations Management Singapore, 4701–4711.
Sukma, D.I., Prabowo, H.A., Setiawan, I., Kurnia, H., & Maulana, I. (2022). Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy. International Journal of Engineering, 35(7), 1246–1256. https://doi.org/10.5829/ije.2022.35.07a.04
Sultoni, A., & Saroso, D.S. (2019). Peningkatan nilai OEE pada mesin printing kaca film menggunakan metode FMEA dan TPM. Operations Excellence: Journal of Applied Industrial Engineering, 11(2), 131–143. https://doi.org/10.22441/oe.v11.2.2019.022
Thun, J.H. (2004). Modelling modern perawatan–a System Dynamics model analyzing the dynamic implications of implementing total productive perawatan. In 22nd International System Dynamics Conference, Oxford, UK.
Thun, J.H. (2006). Maintaining preventive perawatan and perawatan prevention: analyzing the dynamic implications of Total Productive Perawatan. System Dynamics Review: The Journal of the System Dynamics Society, 22(2), 163-179.
Wijayanto, A.B., & Tjahjaningsih, Y.S. (2019). Analisis Total Productive Perawatan pada mesin-mesin unit work working 2 dan 5 (Studi Kasus di Divisi Produksi 2 PT KTI). Prosiding SENIATI, 172-17
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
