USULAN PENERAPAN TOTAL PRODUCTIVE MAINTENANCE (TPM) GUNA MENINGKATKAN KINERJA MESIN ELEKTROPLATING DI PERUSAHAAN FURNITUR TANGERANG
Abstrak
Abstract. PT. Utama Raya Motor Industry is a company engaged in the field of
furniture have a problem relating with the frequency of downtime continues to
increase every time due to the damage caused to machinery. Therefore, the
necessary steps to be able to cope with and prevent such problems. Total
Productive Maintenance (TPM) is one method that can be used to improve the
productivity and efficiency of machinery effectively. One application of TPM is a
measure the Overall Equipment Effectiveness (OEE), then proceed with the six
big losses OEE measurement to determine the efficiency of the missing and the
largest contributing factors that lead to low effectiveness of the six factors six big
losses. The data used from January to December 2014 with the object of research
electroplating machine. During the month the average value obtained average
value results are low. From these measurements indicate that the setup and
adjustment losses has donated the biggest losses in the engine electroplating,
followed idling and minor stoppages losses. So that the necessary repairs heating
system solution and electroplating machine filter system to reduce losses that
occur due to setup and adjustment losses and losses idling and minor stoppages.
Keywords: TPM, OEE, six big losses, Pareto diagram, cause-effect diagram.
Unduhan
Unduhan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
