PERANCANGAN VISUAL DISPLAY INFORMASI DENGAN PENDEKATAN ERGONOMI
DOI:
https://doi.org/10.22441/pasti.2021.v15i2.003Kata Kunci:
Perancangan, Visual Display, Ergonomi, AwarenessAbstrak
Tujuan penelitian ini adalah membantu PT Impero Nusa Pratama dalam meningkatkan awareness terhadap System Operating Procedure perusahaan melalui visual display informasi. Perancangan dilakukan dengan pendekatan ergonomi berdasarkan beberapa kriteria rancangan. Kriteria rancangan visual display dari sisi penentuan kalimat, tipografi, ukuran huruf, dan pemilihan warna agar display informasi dapat terlihat dan diterima dengan baik oleh karyawan. Berdasarkan analisis masalah dengan menggunakan 5W 1H diperoleh penyebab operator tidak menyelesaikan pekerjaan dalam satu siklus adalah bermain handphone pada saat bekerja. Display rekomendasi yang dirancang mempertimbangkan visual activity (VA), typography, stroke width, letter height, dan komposisi warna. Dimensi visual display yang dirancang yaitu, tinggi huruf untuk display ruang produksi 1 memiliki ukuran lebar huruf 8,7 mm dan tinggi huruf 43,4 mm dengan ukuran display panjang 274,3 x lebar 232 mm. Display ruang produksi 2 memiliki ukuran lebar huruf 5,8 mm dan tinggi huruf 28,96 mm dengan ukuran display panjang 71,4 x lebar 298,7 mm.
Unduhan
Referensi
Bridger, R. (2008). Introduction to Ergonomics. Routledge.
Gunawan, M. D., & Bhirawa, W. T. (2019). PERANCANGAN PETA JALUR EVAKUASI DENGAN M ETODE DJIKSTRA ( STUDI KASUS UNIVERSITAS DIRGANTARA MARSEKAL SURYADARMA ). Jurnal Teknologi Industri, 5(2). https://core.ac.uk/download/pdf/286769138.pdf
Hutabarat, J. (2010). USULAN RANCANGAN RAMBU-RAMBU LALU LINTAS JALAN RAYA YANG ERGONOMIS DITINJAU DARI ASPEK DISPLAY SEHINGGA MEMBERI KENYAMANAN BAGI PENGGUNA JALAN. In Prosiding Seminar Nasional Manajemen Teknologi XI Program Studi MMT-ITS. http://eprints.itn.ac.id/3681/
Ishartomo, F., & Sutopo, W. (2018). SATU DEKADE (2008-2017) RISET ERGONOMI DI INDONESIA DALAM PERSPEKTIF TEKNIK INDUSTRI: SUATU STUDI BIBLIOMETRIK. Seminar Nasional Multi Disiplin Ilmu Dan Call For Papers UNISBANK (SENDI_U) Tahun 2018, 37–44. https://www.unisbank.ac.id/ojs/index.php/sendi_u/article/view/5958
Khakim, A. N., & Umyati, A. (2017). Usulan Perancangan Jalur Evakuasi dan Display Dengan Pendekatan Pengukuran Jarak. In Jurnal Teknik Industri (Vol. 5, Issue 2).
Khan, M., & Khushdil. (2013). Comprehensive Study on the Basis of Eye Blink, Suggesting Length of Text Line, Considering Typographical Variables the Way How to Improve Reading from. Advances in Internet of Things, 3(1), 9–20. https://www.scirp.org/html/2-4000021_27425.htm
McCormick, E. J., & Sanders, M. S. (1993). Human factors in engineering and design. McGraw-Hill Companies.
Nurmianto, E. (2004). Ergonomi - Konsep Dasar dan Aplikasinya. Prima Printing Surabaya.
Purwaningsih, R. (2016). ANALISIS PENGARUH TEMPERATUR LINGKUNGAN, BERAT BADAN DAN TINGKAT BEBAN KERJA TERHADAP DENYUT NADI PEKERJA GROUND HANDLING BANDARA. In Jurnal Teknik Industri: Vol. XI (Issue 1). https://www.academia.edu/download/50890537/jurnal_suhu_unddip.pdf
Putera, B. R., & Arvianto, A. (2018). … TUBUH PEKERJA PADA KEGIATAN PERAKITAN (ASSEMBLY) DI PT. HITACHI CONSTRUCTION MACHINERY INDONESIA DENGAN MENGGUNAKAN METODE …. Industrial Engineering Online Journal. https://ejournal3.undip.ac.id/index.php/ieoj/article/view/20548
Rudianto, A. (2017). Kajian Ergonomi Pada Visual Display Penunjuk Informasi Pelabuhan DI Kawasan Kuala Enok. Jurnal BAPPEDA, 3(1). https://ojs.selodangmayang.com/index.php/bappeda/article/download/49/43
Santiasih, I. (2013). Kajian Manual Material Handling Terhadap Kejadian Low Back Pain Pada Pekerja Tekstil. J@TI UNDIP, VIII(1), 21–26. https://ejournal.undip.ac.id/index.php/jgti/article/view/4775
Sitio, Y., & Purwaningsih, R. (2016). Analisis Ergonomi Kabin Masinis Di Lokomotif CC203 Ditinjau Dari Aspek Display Dan Kontrol. Industrial Engineering Online Journal, 5(2). https://ejournal3.undip.ac.id/index.php/ieoj/article/view/11896
Sutalaksana, I., Anggawisastra, R., & Tjakraatmadja, J. (2006). Teknik Perancangan Sistem Kerja. Penerbit ITB Bandung.
Syalli Siregar, E., Yuniar, Y., & Desrianty, A. (2015). Usulan Perancangan Jalur Evakuasi Menggunakan Algoritma DJIKSTRA (STUDI KASUS: GEDUNG 21 ITENAS). Jurnal Online Institut Teknologi Nasional, 3(1), 73–84. http://ejurnal.itenas.ac.id/index.php/rekaintegra/article/view/654
Torik. (2016). ANALISA POSTUR PENGENDARA MOTOR UNTUK EVALUASI DIMENSI BAGIAN TEMPAT DUDUKAN. Sinergi.Mercubuana.Ac.Id, 20(3), 223–228. https://doi.org/10.22441/sinergi.2016.3.008
Valentino, D. E. (2019). Pengantar Tipografi. Tematik-Jurnal Teknologi Informasi Dan Komunikasi, 6(2), 152–173. https://jurnal.plb.ac.id/index.php/tematik/article/view/254
Vilar, A., Možina, K., Pavko-Čuden, A., Mozina, K., & Pavko-Cuden, A. (2013). Typography and Logos in Knitted Structures. In researchgate.net. http://proshop.patriots.com/p/revolution-coaches-
Widodo, L., Ariyanti, S., & Kurniawan, F. A. (2018). Perancangan Stasiun Kerja Ergonomis Pada Stasiun Kerja Printing CV. KARYAMITRA LESTARI. Journal.Untar.ac.Id, 6(29–34).
http://journal.untar.ac.id/index.php/industri/article/view/3021
Yuliarty, P., & Anggraini, R. (2019). PERANCANGAN TEMPAT WUDHU ERGONOMIS BERDASARKAN ANTROPOMETRI PENGGUNA. (STUDI KASUS PADA MALL ABC, JAKARTA BARAT). In Jurnal PASTI (Vol. 3, Issue 3). https://publikasi.mercubuana.ac.id/index.php/pasti/article/view/4982
Yuliarty, P., & Soegiyanto, S. (2017). ANALISIS TINGKAT RISIKO ERGONOMI PADA POIN KERJA CHASSIS AND TIRE DENGAN METODE RAPID ENTIRE BODY ASSESSMENT (REBA) DI DEPARTEMEN ASSEMBLY FRAME PT. X (INDUSTRI PERAKITAN MOBIL). Seminar Nasional Sains Dan Teknologi 2017, 1–11. https://jurnal.umj.ac.id/index.php/semnastek/article/view/2024
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
