Enhancing Conveyor Belt Performance: Evaluating the Impact of In-creased Capacity Using Belt Analyst Software
DOI:
https://doi.org/10.22441/ijimeam.v6i1.19449Keywords:
conveyor belt performance, capacity increase, structural simulation, belt deflection, belt tension analysisAbstract
This study investigates the effects of increasing conveyor belt capacity from 148.5 tons per hour (t/h) to 180 t/h on the overall system performance, employing both manual measurements and simulations using Belt Analyst software. The research aims to evaluate critical parameters such as effective pulling force, motor power requirements, structural load, and belt deflection, which are essential for determining the feasibility and impact of such an upgrade. The analysis reveals that with the capacity increase, the effective pulling force required rises to 14,072 N, while the motor power usage escalates to 15 kW. Concurrently, the structural load experiences a significant increase from 46.144 kg/m to 56.238 kg/m, and belt deflection intensifies from 22 mm to 27 mm. These findings suggest that increasing the conveyor belt capacity to 180 t/h, may lead to increased stress on the structure and belt, which could potentially affect the lifespan and performance of the conveyor system. Furthermore, while the conveyor system's performance enhances at the higher capacity, it also places additional stress on the system's components. The study further examines the implications of these changes, emphasizing the potential risks to the conveyor belt’s structural integrity and the possible reduction in its lifespan due to the increased mechanical stress. It is highlighted that careful consideration and precise engineering adjustments are necessary when planning capacity enhancements to avoid adverse effects on the system's longevity and reliability.
Downloads
References
Y. Dhamane et al., “Design, analysis and optimisation of belt conveyor system for coal application,” Int. Res. J. Mod. Eng. Technol. Sci., vol. 02, no. 05, pp. 98–1007, 2020.
G. Wheatley and R. I. Rubel, “Analysis of conveyor drive power requirements in the mining industry,” Acta Logist., vol. 8, no. 1, pp. 37–43, 2021, doi: 10.22306/al.v8i1.200.
Y. Yao and Z. Bi-sheng, “Influence of the elastic modulus of a conveyor belt on the power allocation of multi-drive conveyors,” PLoS One, vol. 15, no. 7, p. e0235768, 2020, doi: 10.1371/journal.pone.0235768.
N. Menga, F. Bottiglione, and G. Carbone, “The indentation rolling resistance in belt conveyors: A model for the viscoelastic friction,” Lubri-cants, vol. 7, no. 7, p. 58, 2019, doi: 10.3390/lubricants7070058.
G. Fedorko and V. Ivančo, “Analysis of force ratios in conveyor belt of classic belt conveyor,” Procedia Eng., vol. 48, pp. 123–128, 2012.
D. Woźniak and M. Hardygóra, “Relationship between the geometry of the transition section and the loads acting on the conveyor belt,” Min. Sci., vol. 30, 2023, doi: 10.37190/msc233005.
L. Hrabovský, J. Gaszek, L. Kovář, and J. Fries, “A laboratory device designed to detect and measure the resistance force of a diagonal con-veyor belt plough,” Sensors, vol. 23, no. 6, p. 3137, 2023, doi: 10.3390/s23063137.
N. E. Hlaing, E. E. Htwe, and M. M. Htay, “Dynamic analysis of the belt conveyor system for detergent industry,” Int. J. Res. Stud. Publ., vol. 8, no. 10, 2018, doi: 10.29322/ijsrp.8.10.2018.p8279.
M. Wang, “Dynamic analysis on the principle and general research situation of band conveyor,” Appl. Mech. Mater., vol. 490–491, pp. 379–382, 2014, doi: 10.4028/www.scientific.net/amm.490-491.379.
S. Bahrun, M. S. Yusoff, M. S. Said, and A. Hassan, “Coal flowability control on preventing spillage on conveyor belt through modeling and sim-ulation for improving its performance,” J. Adv. Res. Fluid Mech. Therm. Sci., vol. 90, no. 1, pp. 130–145, 2021, doi: 10.37934/arfmts.90.1.130145.
D. M. Du, L. Hong, C. S. Zhu, and Q. He, “Virtual prototype modeling and starting method of belt conveyor,” Appl. Mech. Mater., vol. 148–149, pp. 879–882, 2011, doi: 10.4028/www.scientific.net/amm.148-149.879.
F. Manta and R. N. Hanifudin, “Technical study of production capacity and work efficiency of conveyer belt in coal delivery to stockpile at PT. Singlurus Pratama,” J. Polimesin, vol. 20, no. 2, pp. 72–77, 2022.
Y. Guo and F. Wang, “Multi body dynamic equations of belt conveyor and the reasonable starting mode,” Symmetry (Basel)., vol. 12, no. 9, p. 1489, 2020, doi: 10.3390/sym12091489.
Y. Feng, M. Zhang, G. Li, and G. Meng, “Dynamic characteristic analysis and startup optimization design of an intermediate drive belt con-veyor with non-uniform load,” Sci. Prog., vol. 103, no. 1, p. 003685041988108, 2019, doi: 10.1177/0036850419881089.
C. Webb, J. Sikorska, R. N. Khan, and M. Hodkiewicz, “Developing and evaluating predictive conveyor belt wear models,” Data-Centric Eng., vol. 1, p. e3, 2020.
S. Kurt, I. Gerdemeli, and C. Cengiz, “Analysis of belt conveyor using finite element method,” Sci. Proc. Int. Congr. Mach. Technol. Mater, vol. 2, pp. 111–113, 2012.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Authors who publish in IJIMEAM retain the following rights:- Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-ShareAlike 4.0 License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgment of its initial publication in this journal.
- Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See What is Open Access).
Read more about the Creative Commons Attribution-ShareAlike 4.0 Licence here: https://creativecommons.org/licenses/by-sa/4.0/.
