Enhancing Homogeneity and Particle Size Reduction in Coffee–Creamer Mixtures Using Fluidized Bed Mixer

Nanang Ruhyat, Erna Multahada, Alfa Firdaus Sirait

Abstract


This study investigates the application of a fluidized bed mixer to improve the homogeneity, particle size distribution, and moisture reduction of coffee and creamer powder mixtures. The research focuses on three types of coffee particles—Type A (145 μm), Type B (100 μm), and Type C (50 μm)—which were mixed with creamer in a weight ratio of 1:0.7. The mixing process was conducted using a prototype fluidized bed mixer with a capacity of 1,000 grams and a blower speed range of 2,800–3,000 rpm. After 10 minutes of mixing, significant reductions in particle size were observed: Type A decreased by 20–30%, Type B by 10–15%, and Type C by 5–10%, with creamer particles also experiencing a 15% reduction. Moisture content dropped from 10.63% to 8.5%, demonstrating the system’s dual function of mixing and drying. Microscopic analysis revealed a uniform particle distribution with minimal agglomeration or segregation, confirming the effectiveness of the fluidized bed mixer in achieving a homogeneous blend. These findings underscore the potential of fluidized bed technology in improving the quality, stability, and handling properties of powder-based products. The results have important implications for instant beverage production, food formulation, and broader powder processing industries, where consistent product performance is essential.

Keywords


Fluidized bed mixer; powder mixing; particle size reduction; moisture content; coffee-creamer blends

Full Text:

PDF

References


BPS - Statistics Indonesia, “Statistik kopi Indonesia 2023,” 2024. Accessed: Jan. 01, 2025. [Online]. Available: https://www.bps.go.id/id/publication/2024/11/29/d748d9bf594118fe112fc51e/statistik-kopi-indonesia-2023.html

C. Zhang, R. Linforth, and I. D. Fisk, “Cafestol extraction yield from different coffee brew mechanisms,” Food Research International, vol. 49, no. 1, pp. 27–31, Nov. 2012, doi: 10.1016/j.foodres.2012.06.032.

J. M. Ueda et al., “Powdered foods: Structure, processing, and challenges: A review,” Applied Sciences, vol. 13, no. 22, p. 12496, Nov. 2023, doi: 10.3390/app132212496.

I. Felfoul et al., “Enzymatic coagulation of raw and reconstituted skim dromedary and cows’ milk powders: Kinetics, rheological and mor-phological properties,” Int Dairy J, vol. 137, p. 105509, Feb. 2023, doi: 10.1016/j.idairyj.2022.105509.

M. Petracco, “Percolation,” in Espresso Coffee, Elsevier, 2005, pp. 259–289. doi: 10.1016/B978-012370371-2/50008-1.

Japanese Coffee Co., “How grinding affects the taste of coffee,” Japanese Coffee Blog. Accessed: Jan. 01, 2025. [Online]. Available: https://japanesecoffeeco.com/blogs/japanese-coffee-blog/how-grinding-affects-the-taste-of-coffee

P. Pittia, M. Dalla Rosa, and C. R. Lerici, “Textural Changes of Coffee Beans as Affected by Roasting Conditions,” LWT - Food Science and Technology, vol. 34, no. 3, pp. 168–175, May 2001, doi: 10.1006/fstl.2000.0749.

G. Angeloni et al., “Using ground coffee particle size and distribution to remodel beverage properties,” European Food Research and Tech-nology, vol. 249, no. 5, pp. 1247–1256, May 2023, doi: 10.1007/s00217-023-04210-3.

E. B. Tarigan, D. Pranowo, and T. Iflah, “Tingkat kesukaan konsumen terhadap kopi campuran Robusta dengan Arabika,” Jurnal Teknologi dan Industri Pertanian Indonesia, vol. 7, no. 1, pp. 12–17, Apr. 2015, doi: 10.17969/jtipi.v7i1.2828.

Warren L. McCabe, Julian C. Smith, and Peter Harriott, Unit operations of chemical engineering, 8th ed. New York: McGraw-Hill, 1985.

Nanang Ruhyat, “Rancang bangun incinerator fluidized bed untuk sampah organik,” Universitas Indonesia, Jakarta, 2007. Accessed: Jan. 01, 2025. [Online]. Available: http://lib.ui.ac.id/opac/ui/detail.jsp?id=20275227&lokasi=lokal

D. Kunii and O. Levenspiel, Fluidization Engineering, 2nd Edition. Elsevier, 1991. doi: 10.1016/C2009-0-24190-0.

A. K. Dalimunthe, R. Permatasari, and S. Cahyati, “Pengaruh diameter partikel terhadap fenomena fluidisasi di dalam fluidized bed,” Prosid-ing Seminar Nasional Cendekiawan, vol. 4, pp. 57–62, Oct. 2018, doi: 10.25105/SEMNAS.V0I0.3318.

Imam Sofi’i, “Rancang bangun mesin penyangrai kopi dengan pengaduk berputar,” TekTan Jurnal Ilmiah Teknik Pertanian, vol. 6, no. 1, pp. 34–45, 2014, doi: 10.25181/tektan.v6i1.857.

U. Suryadhiyanto and I. Qiram, “Pengaruh jumlah dan kemiringan sudu mixer poros vertikal (vertical stirred mixer) terhadap unjuk kerja pencampuran,” Rotor: Jurnal Ilmiah Teknik Mesin, vol. 11, no. 1, 2018, doi: 10.19184/rotor.v11i1.5299.

V. Rimpiläinen, L. M. Heikkinen, and M. Vauhkonen, “Moisture distribution and hydrodynamics of wet granules during fluidized-bed drying characterized with volumetric electrical capacitance tomography,” Chem Eng Sci, vol. 75, pp. 220–234, Jun. 2012, doi: 10.1016/j.ces.2012.03.028.

N. Ruhyat, H. I. Fiqih, J. R. Mardhatilla, F. Maulana, F. Anggara, and D. Murniati, “Hydrodynamic study of drying on Qisthi Hindi using a fluid-ized bed dryer,” Journal of Integrated and Advanced Engineering (JIAE), vol. 2, no. 2, pp. 97–106, Sep. 2022, doi: 10.51662/jiae.v2i2.67.

A. F. Saragih, I. P. Pangaribuan, and A. S. Wibowo, “Sistem kendali mixer otomatis di industri makanan,” eProceedings of Engineering, vol. 4, no. 3, Dec. 2017, Accessed: Apr. 01, 2025. [Online]. Available: https://openlibrarypublications.telkomuniversity.ac.id/index.php/engineering/article/view/4812

R. Weinekötter and H. Gericke, Mixing of Solids, vol. 12. Dordrecht: Springer Netherlands, 2000. doi: 10.1007/978-94-015-9580-3.

Luthfia Hajar Abdillah, “Pengaruh mixing time terhadap homogenitas slurry propelan dengan mixer sigma blade,” Institut Teknologi Sepuluh Nopember, Surabaya, 2017. Accessed: Jan. 01, 2025. [Online]. Available: https://repository.its.ac.id/47327/1/2315201001-Master_Thesis.pdf

R. Hasibuan, F. Adventi, and R. P. Rtg, “Pengaruh suhu reaksi, kecepatan pengadukan dan waktu reaksi pada pembuatan sabun padat dari minyak kelapa (Cocos nucifera L.),” Jurnal Teknik Kimia USU, vol. 8, no. 1, pp. 11–17, May 2019, doi: 10.32734/JTK.V8I1.1601.




DOI: http://dx.doi.org/10.22441/ijimeam.v7i1.31132

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Nanang Ruhyat, Erna Multahada, Alfa Firdaus Sirait

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

INDEXED IN

 

Publisher Address:
Universitas Mercu Buana
Program Studi S2 Teknik Mesin
Jl. Meruya Selatan No. 1, Kembangan, Jakarta 11650, Indonesia
Phone/Fax. (+6221) 5871335
Email [email protected]
Homepage mercubuana.ac.id/magister-teknik-mesin

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.