Indexing

Yulia, F.; Harianja, V.; Bonadharma, N.; Pajri, N.; Irsan, N.
Advancing Energy Conservation and Sustainable Building Practices Through Comprehensive thermal–cooling Load Analysis in Airport Building
(2026) Int J Innov Mech Eng Adv Mater, 5 (1), pp. 34, Cited 2 times.
https://www.scopus.com/pages/publications/105004880818?origin=resultslist

Barleany, D. R.; Sari, D. K.; Lestari, R. S.; Raharja, Y.; Gunawan, A.
Biopolymer-Based Film Preparation for Potential Smart Food Packaging Material Application
(2026) International Journal of Innovation in Mechanical Engineering and Advanced Materials, 5 (3), pp. 109 - 117, Cited 2 times.
https://www.scopus.com/pages/publications/105011704336?origin=resultslist

Yamin, M.; Mumtaz, M.M.; Firmansyah, R.
Handling and Stability Analysis of an Autonomous Vehicle Using Model Predictive Control in a CarSim Simulink Co-Simulation Environment
(2025) Int J Innov Mech Eng Adv Mater, 7, pp. 98, Cited 1 times.
https://www.scopus.com/pages/publications/105042714947?origin=resultslist

Cholik, A.; Ruhyat, N.; Novianto, S.
Performance Evaluation of Ammonia Refrigeration Systems in a Texturizing Plant
(2024) Int J Innov Mech Eng Adv Mater, 6, pp. 161 - 172, Cited 2 times.
https://www.scopus.com/pages/publications/105020163465?origin=resultslist

Lenahatu, A.; Yamin, M.
Ride Test on Vehicles Travelling Over Speed Bumps: Simulation with CarSim Software
(2024) Int J Innov Mech Eng Adv Mater, 6, pp. 107, Cited 2 times.
https://www.scopus.com/pages/publications/105022932442?origin=resultslist

Pramana, P.A.; Fitri, M.; Hamid, A.; Romahadi, D.
Effect of Water Hyacinth Fiber Length and Content on the Torsional Strength of Epoxy Resin Composites
(2024) International Journal of Innovation in Mechanical Engineering and Advanced Materials, 6, Cited 4 times.
https://www.scopus.com/pages/publications/105021862898?origin=resultslist

Nasution, H.; Aubaidellah, N.H.
Condensate water processing of split-unit air conditioning system on commercial building
(2024) Int J Innov Mech Eng Adv Mater, Cited 1 times.
https://www.scopus.com/pages/publications/105036176428?origin=resultslist

Sidik, M.A.M.; Leman, A.M.; Feriyanto, D.; Abdulmalik, S.S.; Zakaria, S.
Green technology for sustainable agriculture: Bio-fertilizer production from municipal waste to preserve the environment
(2024) International Journal of Innovation in Mechanical Engineering and Advanced Materials, (3), pp. 245 - 261, Cited 4 times.
https://www.scopus.com/pages/publications/85219579292?origin=resultslist

Siang, A.O.L.; Leman, A.M.; Feriyanto, D.; Abdulmalik, S.S.; Zakaria, S.
Sustainable biodiesel production from waste cooking oil and crude palm oil using a custom mini pilot plant
(2024) Int J Innov Mech Eng Adv Mater, 6, pp. 7, Cited 1 times.
https://www.scopus.com/pages/publications/85215098330?origin=resultslist

Safaat, A.; Noviyanto, A.
Failure analysis of rotary screw compressor and its modifications
(2024) Int J Innov Mech Eng Adv Mater, 3, Cited 2 times.
https://www.scopus.com/pages/publications/85164408402?origin=resultslist

Dahani, W.; Sundari, R.; Somali, S.; Marwanza, I.; Ivetta, I.
Comparative study using low cost acetic and sulfuric acids on roasting and peroxide for leaching process to extract Pb from Galena
(2023) Int J Innov Mech Eng Adv Mater, 4, pp. 51, Cited 1 times.
https://www.scopus.com/pages/publications/105021095502?origin=resultslist

Kurniawan, R. N. A.; Romahadi, D.; Fitri, M.; Karim, M. R.
Implementation of the Finite Element Method in Solidworks to optimize the front cast wheel design for motorcycles
(2023) International Journal of Innovation in Mechanical Engineering Advanced Materials Ijimeam, 4 (3), pp. 66 - 73, Cited 3 times.
https://www.scopus.com/pages/publications/85180369913?origin=resultslist

Harmaji, A.; Fadillah, A.
Morphological and Properties of Portland-Composite Cements with Class C Fly Ash
(2023) International Journal of Innovation in Mechanical Engineering and Advanced Materials, 4 (2), pp. 46, Cited 2 times.
https://www.scopus.com/pages/publications/85202690361?origin=resultslist

Putra, Y.M.; Timuda, G.E.; Darsono, N.; Chollacoop, N.; Khaerudini, D.S.
Optimization of machining parameters on the surface roughness of aluminum in CNC turning process using Taguchi method
(2023) Int J Innov Mech Eng Adv Mater, 5 (2), pp. 56 - 62, Cited 6 times.
https://www.scopus.com/pages/publications/85208446556?origin=resultslist

Ruhyat, N.
Comparison of the dryer air inlet position on the spray dryer with a double condenser to produce a rotating flow throughout the drying chamber: CFD analysis
(2023) Int J Innov Mech Eng Adv Mater, 5 (1), pp. 16, Cited 1 times.
https://www.scopus.com/pages/publications/85215977125?origin=resultslist

Leni, D.; Kusuma, Y.P.; Sumiati, R.; Mayana, H.C.
The Implementation of Pandas Profiling as a Tool for Analyzing Mechanical Properties Data of Nickel-Based Superalloys Based on Alloy Chemical Composition
(2022) International Journal of Innovation in Mechanical Engineering Advanced Materials Ijimeam, 4 (3), pp. 86 - 91, Cited 1 times.
https://www.scopus.com/pages/publications/105019338232?origin=resultslist

Feriyanto, D.; Pranoto, H.; Leman, A.M.; Sudarma, A.F.; Romahadi, D.
NiO electro-deposition technique of -Al<inf>2</inf>O<inf>3</inf> washcoat on FeCrAl substrate by using sulphamate type solution
(2022) International Journal of Innovation in Mechanical Engineering and Advanced Materials, 4 (1), pp. 23 - 29, Cited 1 times.
https://www.scopus.com/pages/publications/105041790646?origin=resultslist

Risyuma, I.; Fitri, M.
Analysis of oil absorption and friction coefficient of bamboo powder, coconut powder, glass powder, and copper powder composites for clutch pads
(2022) Inter J Innov Mech Eng Adv Mater Ijimeam, 4 (2), pp. 58 - 65, Cited 2 times.
https://www.scopus.com/pages/publications/85216415287?origin=resultslist

Dewi, M.S.; Alva, S.; Wan Jamil, W.A.
Development and characterization of solid Cu/CuSO4 reference electrodes
(2021) Int J Innov Mech Eng Adv Mater, 3, pp. 17 - 25, Cited 2 times.
https://www.scopus.com/pages/publications/85180360175?origin=resultslist

Sitorus, M.B.H.
Effect of welding heat input on the corrosion rate of carbon steel MMA welding
(2021) International Journal of Innovation in Mechanical Engineering and Advanced Materials, 3 (1), pp. 26 - 31, Cited 1 times.
https://www.scopus.com/pages/publications/105023381021?origin=resultslist

Marjianto, A.; Hafthirman, H.; Darmanto, P.S.
Energy and Cost Saving Potential of Hotel Air Conditioning Using Magnetic Bearing Chiller in Jakarta
(2021) Int J Innov Mech Eng Adv Mater, 3, pp. 1, Cited 2 times.
https://www.scopus.com/pages/publications/85168282092?origin=resultslist

Cahyono, G.R.; Amrullah, A.; Ansyah, P.R.; Mikael, N.A.; Reynaldi, P.S.M.; Rusdi, R.
Effect of discharge variation on the performance of single blade Archimedes screw turbine: Prediction with computational fluid dynamic
(2021) International Journal of Innovation in Mechanical Engineering and Advanced Materials, 3 (2), Cited 1 times.
https://www.scopus.com/pages/publications/105036410612?origin=resultslist

Dimyati, A.; Purwanto, S.; Iskandar, R.
High resolution imaging of boron distribution on diamond film using energy filtered TEM
(2016) Int J Innov Mech Eng Adv Mater, 2 (1), pp. 16, Cited 1 times.
https://www.scopus.com/pages/publications/105023637837?origin=resultslist

Agustian, E.; Praptijanto, A.; Sebayang, D.; Rus, A.Z.M.; Hasan, S.
Biodiesel production from waste cooking oil by using ultrasonic tubular reactor
(2016) Int J Innov Mech Eng Adv Mater, 2 (1), Cited 3 times.
https://www.scopus.com/pages/publications/85075344295?origin=resultslist

Alva, S.; Heng, L.Y.; Ahmad, M.
Optimization of screen printed reference electrode based on charge balance and poly (Butyl acrylate) photocurable mebrane
(2016) Int J Innov Mech Eng Adv Mater, 2 (1), pp. 10 - 15, Cited 9 times.
https://www.scopus.com/pages/publications/85031117338?origin=resultslist

Alva, S.; Utami, R.S.; Shyuan, L.K.; Puspasari, I.; Mohammad, A.B.
Synthesis and Characterization of Toluene Sulfonic Acid (Tsa)-Doped Polypyrrole Nanoparticles: Effects of Dopant Concentrations
(2016) Int J Innov Mech Eng Adv Mater, 2 (1), pp. 1 - 9, Cited 9 times.
https://www.scopus.com/pages/publications/85058387047?origin=resultslist

Manurung, Y.H.P.; Mohamed, M.A.; Andud, D.; Abidin, A.Z.; Saidin, S.; Kasim, K.; Ishak, D.P.
Life extension technique for welded structure using HFMI/PIT: a review on past and current researches with applications
(2016) International Journal of Innovation in Mechanical Engineering and Advanced Materials, 2 (1), pp. 46 - 60, Cited 1 times.
https://www.scopus.com/pages/publications/85214384919?origin=resultslist

Wibowo, I.A.; Sebayang, D.
Optimization of solar-wind-diesel hybrid power system design using HOMER
(2015) Int J Innov Mech Eng Adv Mater, 1, pp. 27 - 31, Cited 3 times.
https://www.scopus.com/pages/publications/85086311895?origin=resultslist

Mulyana, T.
A nonparametric system identification based on transient analysis with plant process of heat exchanger as study case
(2015) International Journal of Innovation in Mechanical Engineering Advanced Materials Ijimeam, 1 (1), pp. 19 - 26, Cited 5 times.
https://www.scopus.com/pages/publications/84992054302?origin=resultslist

Hasan, S.; Ahmad, A.N.A.; Feriyanto, D.
Computerized value stream system (CVSS) to reduce waste in lean manufacturing operation
(2015) International Journal of Innovation in Mechanical Engineering and Advanced Materials, 1 (1), pp. 13 - 18, Cited 1 times.
https://www.scopus.com/pages/publications/85083005727?origin=resultslist

Ismoen, M.; Karim, M.F.; Mohammand, R.; Kandasamy, R.
Similarity and non-similarity solutions of flow and heat transfer over a wedge with power law stream condition
(2015) Int J Innov Mech Eng Adv Mater, 1 (1), pp. 5 - 12, Cited 1 times.
https://www.scopus.com/pages/publications/85063742358?origin=resultslist