Rancang Bangun Prototipe Sistem Kendali Terdistribusi Instalasi Penerangan pada Gedung 3 Lantai berbasis IoTaaS (Internet of Things as a Service) menggunakan Docker Container
DOI:
https://doi.org/10.22441/jte.v10i1.004Abstract
Berkembangnya Cloud Computing dan Internet of Things (IoT) mengubah cara memahami suatu infomasi dan sistem komunikasi untuk saling berhubungan menggunakan suatu infrastruktur cloud jarak jauh. Lain dari itu, skalabilitas sistem sering difokuskan dalam low-level architecture. Sistem kendali terdistribusi dapat saling terhubung pada suatu platform IoTaaS (Internet of Things as a Service). IoTaaS divirtualisasi dengan basis kontainer (container-based) guna meningkatkan layanan IoT Cloud atau IoT Microservice. IoTaaS dikembangkan pada Docker Container dimana telah layak diaplikasikan pada nodes/gateway misalnya payment gateway, fog, microservices dan lain-lain. Maka dari itu pengembangan IoTaaS telah berhasil diaplikasikan pada sistem instalasi penerangan untuk gedung perkantoran 3 lantai. Sehingga didapatkan nilai rata-rata Network I/O sebesar 14.02KB/4.59KB (download/upload) sehingga memungkinkan tiap container mengirimkan data sebesar 118.77 B dalam 7.02 milisecond.
Downloads
References
Y. Gunardi, A. Adriansyah and T. Anindhito, "Small Smart Community: An Application Of Internet Of Things", ARPN Journal of Engineering and Applied Sciences, Vol. 10, No. 15, 2015.
A. Celesti, D. Mulfari, M. Fazio, M. Villari and A. Puliafito, "Exploring Container Virtualization in IoT Clouds", IEEE International Conference on Smart Computing, 2016.
DOI: 10.1109/SMARTCOMP.2016.7501691
J. Rufino, M. Alam, J. Ferreira,A. Rehman and K. F. Tsang, "Orchestration of containerized microservices for IIoT using Docker", IEEE International Conference on Industrial Technology (ICIT), 2017.
DOI: 10.1109/ICIT.2017.7915594
J. Moore, G. Kortuem, A. Smith, N. Chowdhury, J. Cavero and D. Gooch, "DevOps for the Urban IoT". Proceedings of the Second International Conference on IoT in Urban Space, 2016.
DOI: 10.1145/2962735.2962747
P. Patel, M. I. Ali and A. Sheth, "On Using the Intelligent Edge for IoT Analytics", IEEE Intelligent Systems, Vol. 32(5), pp.64–69, 2017.
DOI: 10.1109/MIS.2017.3711653
S. Qanbari, S. Pezeshki, R. Raisi, S. Mahdizadeh, R. Rahimzadeh, N. Behinaein, N., … S. Dustdar, "IoT Design Patterns: Computational Constructs to Design, Build and Engineer Edge Applications", IEEE First International Conference on Internet-of-Things Design and Implementation (IoTDI), 2016.
DOI: 10.1109/IoTDI.2015.18
M. Alam, J., Rufino, J. Ferreira, S. H. Ahmed, N. Shah, and Y. Chen, "Orchestration of Microservices for IoT Using Docker and Edge Computing", IEEE Communications Magazine, 56(9), 118–123, 2018.
DOI: 10.1109/MCOM.2018.1701233
P. Bellavista, and A. Zanni, "Feasibility of Fog Computing Deployment based on Docker Containerization over RaspberryPi", Proceedings of the 18th International Conference on Distributed Computing and Networking, 2018.
DOI: 10.1145/3007748.3007777
B. Cheng, A. Papageorgiou, F. Cirillo, and E. Kovacs, "GeeLytics: Geo-distributed edge analytics for large scale IoT systems based on dynamic topology", IEEE 2nd World Forum on Internet of Things (WF-IoT), 2015.
DOI:10.1109/WF-IoT.2015.7389116
R. Muzawi, Y. Efendi dan N. Sahrun, "Prototype Pengendalian Lampu Jarak Jauh Dengan Jaringan Internet Berbasis Internet of Things (IoT) Menggunakan Rasberry Pi 3", Jurnal Inform, Vol. 3, No.1, 2018.
DOI: 10.25139/ojsinf.v3i1.642
Y. Efendi. "Internet of Things (IoT) "Sistem Pengendalian Lampu Menggunakan Raspberry Pi Berbasis Mobile", Jurnal Ilmiah Ilmu Komputer, Vol. 4, No. 1, pp. 19-26, 2018
F. Z. Rachman, "Smart Home Berbasis IoT", Seminar Nasional Inovasi Teknologi Terapan (SNITT), Politeknik Negeri Balikpapan, 2017.
I. T. Baskoro, Darjat dan Sudjadi, "Perancangan Pengontrolan Nyala Lampu Dan Kipas Angin Pada Sebuah Ruangan Menggunakan Raspberry Pi Model B Dengan Web Gui", Jurnal Transient, Vol. 3, No. 4, pp. 567-571, 2014.
A. Setiawan, I. W. Mustika dan T. B. Adji. "Perancangan Context-Aware Smart Home Dengan Menggunakan Internet O f Things", Seminar Nasional Teknologi Informasi dan KOmunikasi (Sentika), pp. 455-459, 2016.
D. Prihtamoko. "Pemanfaatan Raspberry Pi Sebagai Server Web Untuk Penjadwalan Kontrol Lampu Jarak Jauh", Jurnal Infotel, Vol. 9, No. 1, pp. 84-91, 2017.
B. Artono dan Fredy Susanto, "Led Control System with Cayenne Framework for The Internet of Things (IoT)", Journal of Electrical Electronic Control and Automotive Engineering (JEECAE),VOl. 2, No. 1, pp. 95-100, 2017.
P. C. Devi, A. R. Matondang dan D. Wahyuni. " Usulan Perbaikan Sistem Pencahayaan Di Unit Percetakan Perusahaan XXX Sumatera Utara", Jurnal Teknik Industri, Sumatera Utara, Vol. 5, No. 1, pp. 7-12, 2014.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
