Rancang Bangun Sistem Monitoring Smart Home Menggunakan Energi Cadangan Berbasis Internet of Things (IoT)
DOI:
https://doi.org/10.22441/jte.2020.v11i2.004Abstrak
Sebagai kebutuhan yang utama bagi masyarakat, keamanan dan kenyaman suatu rumah harus dipertimbangkan. Pengaplikasian konsep Smart Home yang kemudian menjadikan Smartphone sebagai penghubung antara pengguna dan peralatan merupakan salah satu solusinya. Penggunaan Smartphone sebagai penghubung ini dapat digabungkan dengan konsep IoT sehingga memungkinkan pengguna dapat memonitor dan mengontrol peralatan melalui internet. Tentu saja dengan bertambahnya peralatan elektronik yang terhubung, dibutuhkan energi cadangan agar memastikan semua tetap baik-baik saja disaat supply utama terganggu. Pembuatan sistem ini terdiri dari beberapa komponen. Proses menggunakan Arduino Mega 2560 sebagai kontrol utama dan Android Phone (Blynk App) sebagai User Interface. Output yang terdiri dari Motor Servo, Buzzer, dan LED. Selain itu juga, terdapat Air Quality Sensor MQ-135, Magnetic Switch MC-38, dan Flame Sensor KY-026 sebagai komponen penunjang sistem monitoring. Hasil pengujian menunjukan, Sitem ini dapat dilakukan dengan menggunakan Blynk App pada perangkat android. Perubahan warna pada LED diukur berdasarkan voltase output PWM yang sesuai dengan spectrum warna pada Blynk App. Flame sensor sebagai indikasi terjadinya kebakaran di ruangan yang ditampilkan pada Phone notification dan twitter. Air Quality bisa menjukan keterangan qualitas udaya yang ada di ruangan. Hasil pengujian unjuk kerja sistem dapat berfungsi sebagai notifikasi pada Android Phone dan twitter, juga dapat mengontrol LED dan servo sebagai contoh apliaksi dari Smart-home.Unduhan
Referensi
Amri, Y., & Setiawan, M. A. (2018, March). Improving Smart Home Concept with the Internet of Things Concept Using RaspberryPi and NodeMCU. In IOP Conference Series: Materials Science and Engineering (Vol. 325, No. 1, p. 012021). IOP Publishing.
Chiam, D. H., Ng, K. L., Lim, K. H., & San Yam, K. (2019, April). Wi-Fi Enabled Modular Sensing System For Smart Home Applications. In IOP Conference Series: Materials Science and Engineering (Vol. 495, No. 1, p. 012019). IOP Publishing.
Ding, J., Li, T. R., & Chen, X. L. (2018, July). The Application of WiFi Technology in Smart Home. In Journal of Physics: Conference Series (Vol. 1061, No. 1, p. 012010). IOP Publishing.
Grabowski, H., & Mayer, V. An android based remote control framework for smart home components.
Kadalla, A. S., Tijjani, A. I., & Luka, M. K. (2016). Android based smart home system.
Magicho, M. (2018). Internet of Things: Smart Home Device.
Maulana, H., & Al-Jabari, M. R. (2018, August). Development of Smart Home System to Controlling and Monitoring Electronic Devices using Microcontroller. In IOP Conference Series: Materials Science and Engineering (Vol. 407, No. 1, p. 012108). IOP Publishing.
Mihalache, A. (2017). Wireless Home Automation System using IoT. Informatica Economica, 21(2).
Qiang, T., Guangling, G., Lina, C., & Han, W. (2018, October). Nodemcu-based Low-cost Smart Home Node Design. In IOP Conference Series: Materials Science and Engineering (Vol. 435, No. 1, p. 012013). IOP Publishing.
Supegina, F., & Setiawan, E. J. (2017). Rancang Bangun IOT Temperature Controller untuk Enclosure BTS Berbasis Microcontroller Wemos dan Android. Jurnal Teknologi Elektro, 8(2).
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
