DESIGN OF AN OPEN-CIRCUIT WIND TUNNEL WITH PIV (PARTICLE IMAGE VELOCIMETRY) SYSTEM
DOI:
https://doi.org/10.22441/jtm.v13i3.15678Keywords:
Wind Tunnel, Open-Circuit System, DimensionsAbstract
This study aims to design a wind tunnel. The designed wind tunnel is an open-circuit wind tunnel with a Particle Image Velocimetry (PIV) system. The wind tunnel has dimensions of 8 meters in length, 1.75 meters in width, and 1.75 meters in height, with a maximum speed of 30 m/s. The design results show that the head loss in the test section is 1.28 meters, the head loss in the contraction chamber is 0.52 meters, and the head loss in the diffuser is 0.49 meters. Therefore, the total head loss is 2.29 meters, requiring a blower power of 11.94 Hp
Downloads
References
. Kusumohadi, C.S., Yoga, N.G. and Arrozi, H., 2015, November. Perancangan Awal Terowongan Angin Kecepatan Rendah Untuk Pengujian Otomotif. In SENS.
. Siregar, A.M., 2016. Rancang Bangun Wind Tunnel Sederhana Untuk Alat Pendukung Studi Eksperimental. MEKANIK: Jurnal Ilmiah Teknik Mesin, 2(2).
. Agni, M., Kirom, M.R. and Bethaningtyas, H., 2015. Analisis Kinerja Terowongan Angin Subsonik Dengan Menggunakan Contraction Cone Polinomial Orde 5. eProceedings of Engineering, 2(3).
. Yuniarsih, N. and Rossbandrio, W., 2015. Pengembangan Terowongan Angin Kecepatan Rendah (Low Speed Wind Tunnel) Untuk Tujuan Edukatif di Politeknik Negeri Batam. Jurnal Integrasi, 7(1), pp.19-22.
. Handayani, S.U., 2014. Pengembangan dan analisa keseragaman aliran terowongan angin tipe terbuka sebagai sarana pengujian aerodinamika. Prosiding PNES II 2014, pp.A-309.
. Rendi, R. and Herlina, F., 2019. Penambahan Lingkaran Pelindung Pada Turbin Air Rotor Savonius. INFO-TEKNIK, 20(2), pp.237-254.
. Stefphanie, C., Rustana, C.E. and Nasbey, H., 2014, October. Pengembangan Desain Terowongan Angin Sederhana. In Prosiding Seminar Nasional Fisika (E-Journal) (Vol. 3, pp. 347-351).
. Arifin, J., 2019. Desain Diffuser Turbin Air Arus Sungai untuk Meningkatkan Laju Arus Sungai. Al Jazari: Jurnal Ilmiah Teknik Mesin, 4(2).
. Hatradi, B., Irfansyah, M. and Puteri, P., 2021. Desain Underwater Rotor Untuk Memanfaatkan Laju Aliran Sungai Sebagai Pembangkit Listrik Tenaga Air. Jurnal Engine: Energi, Manufaktur, dan Material, 5(2), pp.77-82.
. Hartanto, A.S., 2005. Perancangan dan pembuatan mekanisme pengukuran gaya angkat dan gaya hambat untuk terowongan angin (Doctoral dissertation, Petra Christian University).
. Fitroh, A.J., 2011. Analisis Losses Pipa Lurus Berdiameter 40 cm pada Terowongan Angin LAPAN. Jurnal Teknologi Dirgantara, 9(1).
. Rahman, A., Farid, A. and Suriansyah, S., 2014. Pengaruh Penggunaan Spoiler pada Model Kendaraan Sedan terhadap Tekanan Hisap dalam Terowongan Angin. PROTON, 6(1).
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
