Product design of upper sandal fabric cutting machine using ergonomic function deployment method
DOI:
https://doi.org/10.22441/oe.2023.v15.i2.084Keywords:
product development, ergonomic function deployment, anthropometryAbstract
In the production process, the upper sandal cutting of KUB Mampu Jaya is still done manually using scissors one by one for each mold. The purpose of this research is to create an ergonomic upper sandal cutting machine. The method used in this research is Ergonomic Function Deployment (EFD). Direct data collection involved observing the production stages and activities carried out by workers through interviews and surveys. The results show that this sandal upper cutting machine has been designed by adjusting user needs so as to minimize production time and the cutting process becomes more efficient. Previously, the production or cutting time took 2 minutes per one upper sandal mold, but with this new cutting machine, the cutting process only takes 1 minute per upper sandal mold, saving up to 1 minute. The results of this study will provide a better solution in designing a sandal upper fabric cutting machine that prioritizes ergonomic aspects and can reduce musculoskeletal complaints.Downloads
References
Abidin, A., Irfan Rahadian, M., & Tribuana, S. (2022). the Effect of Product Quality for Increase Consumer Satisfaction At Shoe and Sandal Stores in Bogor Regency Article Info Abstract. Jemeb, 2(1), 32–40. https://abnusjournal.com/jmeb
Adiyanto, O., Mohamad, E., Jaafar, R., Ma’ruf, F., Faishal, M., & Anggraeni, A. (2022). Application of Nordic Body Map and Rapid Upper Limb Assessment for Assessing Work-related Musculoskeletal Disorders: A case study in Small and Medium Enterprises. International Journal of Integrated Engineering, 14(4), 10–19. https://doi.org/10.30880/ijie.2022.14.04.002
Anwardi, A., Nofirza, N., & Jasri, H. (2019). Perancangan Alat Bantu Memanen Karet Ergonomis Guna Mengurangi Resiko Musculoskeletal Disorder Menggunakan Metode RULA dan EFD. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 5(2), 139-147. https://doi.org/10.24014/jti.v5i2.9000
Asih, I., Setiawan, I., Hernadewita, H., & Hendra, H. (2022). Effects of ergonomics intervention on work accidents in the construction sector and their effect on productivity. Jurnal Sistem Dan Manajemen Industri, 6(1), 45–55. https://doi.org/10.30656/jsmi.v6i1.4242
Atmojo, E. B. T. (2020). Analisis Nordic Body Map Terhadap Proses Pekerjaan Penjemuran Kopi Oleh Petani Kopi. Jurnal Valtech, 3(1), 30–33.
Barita, E., & Nuryono, A. (2022). Menurunkan Keluhan Nyeri Pada Tubuh Pekerja Pada Proses Pembersihan Hardware Menggunakan Analisis NBM, RULA, dan Antropometri. Operations Excellence: Journal of Applied Industrial Engineering, 14(3), 272. https://doi.org/10.22441/oe.2022.v14.i3.061
Dwiseli, F., Syafitri, N. M., Rahmadani, Y., & Hamid, F. (2023). Pengaruh Masa Kerja Dan Postur Kerja Dengan Keluhan Musculoskeletal Pada Pekerja Supir Mobil Di Terminal Daya Kota Makassar. Jurnal Ilmu Kedokteran Dan Kesehatan, 10(2), 1530–1536. https://doi.org/10.33024/jikk.v10i2.9214
Megawati, E., Saputra, W. S., Attaqwa, Y., & Fauzi, S. (2021). Edukasi Pengurangan Resiko Terjadinya Musculoskeletal Disorders (MSDs) Dini, Pada Penjahit Keliling Di Ngaliyan Semarang. Jurnal BUDIMAS, 03(02), 450–456. http://dx.doi.org/10.29040/budimas.v3i2.3478
Nanda, R., Dene, D. H., & Asep, A. E. N. (2022). Analisis Postur Kerja Aktivitas Pemindahan Barang dengan Metode Rapid Upper Limb Assessment (RULA) di UKM Sembako Asri Karawang. Industri Inovatif : Jurnal Teknik Industri, 12(1), 30–36. https://doi.org/10.36040/industri.v12i1.3710
Ningsih, D. K., Lalu, H., & Salma, S. A. (2022). Design Of Safety Signs Using Ergonomic Function Deployment Method At PT . XYZ 2007-2020 Accident Charts. 06(02), 178–192.
Nurhayati, E. (2022). Pendekatan Quality Function Deployment (QFD) dalam proses pengembangan desain produk Whiteboard Eraser V2. Productum: Jurnal Desain Produk (Pengetahuan Dan Perancangan Produk), 5(2), 75–82. https://doi.org/10.24821/productum.v5i2.7118
Pratama, I., & Perdana, S. (2020). Implementasi Ergonomic Function Deployment (EFD) Pada Usulan Redesign Meja Kerja Stasiun Pemotongan. Journal of Chemical Information and Modeling, 2(1), 5–7. http://jurnal.globalhealthsciencegroup.com/index.php/JPPP/article/download/83/65%0Ahttp://www.embase.com/search/results?subaction=viewrecord&from=export&id=L603546864%5Cnhttp://dx.doi.org/10.1155/2015/420723%0Ahttp://link.springer.com/10.1007/978-3-319-76
Pujianto, R., Yasri, A., Lutfir, B., & Azis, M. A. (2022). Perancangan Tangga Telescopic sebagai Alat Kerja Ergonomi. Trinistik, YY(Z).
Sukma, D. I., Setiawan, I., Kurnia, H., Atikno, W., & Purba, H. H. (2022). Quality Function Deployment in Healthcare: Systematic Literature Review. Jurnal SIstem Teknik Industri (JSTI), 24(1), 15–27. https://doi.org/10.1007/978-3-319-61291-1
Sumigar, C. K., Kawatu, P. A. ., & Warouw, F. (2022). Hubungan antara umur dan masa kerja dengan keluhan muskuloskeletal pada petani di desa tambelang minahasa selatan. Jurnal KESMAS, 11(2), 22–30.
Suryatman, T. H., & Linayah, R. (2021). Perancangan Meja Laptop Ergonomis Di Masa Pandemi Covid-19 Dengan Pendekatan Antropometri Dan Metode Quality Function Deployment (Qfd). Jurnal Teknik, 10(2), 38–49. https://doi.org/10.31000/jt.v10i2.5582
Syahputra, A., & Andriani, M. (2021). Strategi Peningkatan Produktivitas Perusahaan Menggunakan Total Productivity Model (TPM) Di PT. Dolomit Putra Tamiang. Jurnal Industri Samudra, 2(1), 2797–7730.
Utomo, W. (2021). Kelelahan Sebelum Dan Setelah Bekerja. Jurnal Keperawatan Suaka Insan (JKSI), 6(1), 40–45.
Wandiyanto, Nurtjahyo, H. K., & Eko Adi Prasetio, D. (2022). Improvement Of Working Posture Process To Change Dies cutting Method Using Rula And Reba At PT. DWA. Jurnal Baut Dan Manufaktur, 04(02), 37-44..
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
