Rancangan Model Konseptual denganTheory of Contraints untuk Menyeimbangkan Lini Produksi dan Meningkatkan Output pada Industri Komponen Otomotif
DOI:
https://doi.org/10.22441/oe.2022.v14.i3.066Keywords:
conceptual model, industry manufacture, line balancing, model design, production capacity, theory of constraintsAbstract
Nowadays, competition among manufaktur industries is increasing rapidly. This competition causes similar industries to compete, including the automotive component industry. To win the competition, the automotive component manufaktur industry must carry out various repair methods. Improvements made include managing inventory, scheduling, delivery, quality management and eliminating waste. Based on observations, problems that often occur in the automotive component manufaktur industry are not achieving production output and unbalanced production lines so that problems such as waste and bootleneck arise. The purpose of this research is to design a model on the production line to increase production output and balance the production line. The method used to analyze and solve this problem is to design a conceptual model of Theory of Constraints (ToC). This method interprets structured and systematic stages to solve problems in the manufaktur industry. Based on the analysis, the results of this study produce a generic model that can be used in the automotive component industry. The models offered can increase production output, balance workloads and eliminate waste.
Downloads
References
Abdurrahman, O. O., Sarasi, V., Chaerudin, I., Primiana, I., & Yunani, A. (2022). Analisa faktor-faktor lean proses untuk meningkatkan efektivitas proses produksi : Studi kasus di Industri Farmasi BFM). Operations Excellence: Journal of Applied Industrial Engineering, 14(1), 78–90. https://doi.org/http://dx.doi.org/10.22441/oe.2022.v14.i1.045
Afif, M. S. N., & Sudarto, S. (2022). Penerapan konsep lean untuk meningkatkan operasi warehouse di industri manufaktur. Operations Excellence: Journal of Applied Industrial Engineering, 14(1), 1–9. https://doi.org/ttp://dx.doi.org/10.22441/oe.2022.v14.i1.043
Ahyan, M., & Eddy Harahap, U. N. (2021). Usulan Perbaikan Lini Produksi Produksi Dengan Menggunakan Metode Theory Of Constraint Dan Metode Moddie Young. Jurnal Vorteks, 02(01), 59–70. https://doi.org/https://doi.org/10.54123/vorteks.v3i1
Christie, J., & Moengin, P. (2016). Evaluasi dan usulan perbaikan kapasitas produksi untuk mencapai target produksi menggunakan metode theory of constraints dan simulasi. Jurnal Teknik Industri-Universitas Trisakti, 6(2), 113–127. https://doi.org/10.25105/jti.v6i2.1535
Fabiani, N. A., Moengin, P., & Adisuwiryo, S. (2019). Perancangan Model Simulasi Tata Letak Gudang Bahan Baku dengan Menggunakan Metode Shared Storage pada PT . Braja Mukti Cakra. Jurnal Ilmiah Teknik Industri-Universitas Trisakti, 9(2), 98–111. https://doi.org/https://doi.org/10.25105/jti.v9i2.4924
Goshime, Y., Kitaw, D., & Jilcha, K. (2019). Lean manufacturing as a vehicle for improving productivity and customer satisfaction engineering industries. International Journal of Lean Six Sigma, 10(2), 691–714. https://doi.org/10.1108/IJLSS-06-2017-0063
Kristiana, L. R., & Sunarni, T. (2018). Aplikasi Pendekatan Theory of Constraints pada Maksimasi Throughput Produksi PT XYZ. Jurnal Media Teknik & Sistem Industri, 2(2), 11–19. https://doi.org/https://doi.org/10.35194/jmtsi.v2i2.399
Kuldeep, P., Reena, P., & Shamuvel, P. (2016). Improvement of Productivity by Theory of Constraints and Line Balancing. International Journal of Research in Advanced Engineering and Technology, 2(6), 1–4. https://doi.org/10.1088/1757-899X/852/1/012111
Novianti, D., Maksudi, & Inten, S. (2020). Rancang Bangun Sistem Production Planning And Inventory Control (PPIC) Untuk Menentukan Estimated Time Departure (ETD) Pada PT Balagi Rattan Cirebon. INTI TALAFA : Jurnal Teknik Informatika, 12(2), 44–53. https://doi.org/https://doi.org/10.32534/int.v12i2.1765
Pacheco, D. A. de J., Pergher, I., Junior, J. A. V. A., & Vaccaro, G. L. R. (2018). Exploring the integration between Lean and the Theory of Constraints in Operations Management. International Journal of Lean Six Sigma, 10(3), 718–742. https://doi.org/10.1108/IJLSS-08-2017-0095
Rogowska, P., & Urban, P. W. (2018). The Case Study Of Bottlenecks Identification For Practical Implementation To The Theory. Multidisciplinary Aspects of Production Engineering, 1(1), 399–405. https://doi.org/10.2478/mape-2018-0051
Sagitta, J. N., Gozali, L., & Daywin, F. J. (2020). Comparison Study of the Application of Line Balancing and the Theory of Constraint. IOP Conf. Series: Materials Science and Engineering, 852(1). https://doi.org/10.1088/1757-899X/852/1/012111
Setiawan, I., Kurnia, H., Setiawan, S., Purba, H. H., & Hernadewita, H. (2022). Reduce Transportation Costs Using the Milk-Run System and Dynamo Stages in the Vehicle Manufacturing Industry. Operational Research in Engineering Sciences: Theory and Applications, 5(2), 17–27. https://doi.org/10.31181/oresta240622030s
Setiawan, Setiawan, I., Jaqin, C., Prabowo, H. A., & Purba, H. H. (2021). Integration of Waste Assessment Model and Lean Automation to Improve Process Cycle Efficiency in the Automotive Industry. Quality Innovation Prosperity, 25(3), 48–64. https://doi.org/10.12776/qip.v25i3.1613
Simatupang, T. M. (1995). Pemodelan sistem (togar M. Simatupang (2nd ed). NINDITA.
Trenggonowati, D. L., Patradhiani, R., & Kulsum. (2020). Pemodelan Sistem Dinamis Untuk Meningkatkan Produktivitas di CV . ABC. Integrasi Jurnal Ilmiah Teknik Industri, 1(1), 1–9.
Vamsi, N., Jasti, K., & Kodali, R. (2017). Lean production : literature review and trends. International Journal of Production Research, 7543(November), 1–19. https://doi.org/10.1080/00207543.2014.937508
Wolniak, R., Skotnicka-Zasadzień, B., & Gębalska-Kwiecień, A. (2018). Identification of bottlenecks and analysis of the state before applying lean management. International Conference Quality Production Improvement, 183(1), 1–6. https://doi.org/https://doi.org/10.1051/matecconf/201818301001
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
