ANALISIS POSTUR TUBUH PEKERJA DEPARTEMEN STAINING FINISHING MENGGUNAKAN METODE REBA (RAPID ENTIRE BODY ASSESSMENT) DI PT BERDIKARI MEUBEL NUSANTARA
DOI:
https://doi.org/10.22441/pasti.2022.v16i3.008Keywords:
Nordic Body Map (NBM), Rapid Entire Body Assessment (REBA)Abstract
PT Berdikari Meubel Nusantara perusahaan manufaktur dengan produk utama beach chair strandkorb. Dalam melakukan pekerjaan operator masih banyak mengeluhkan ketidaknyamanan saat bekerja seperti keluhan rasa nyeri pada bagian tubuh hal ini dibuktikan dari hasil kuisoner Nordic Body Map (NBM) diketahui bahwa departemen staining finishing memiliki persentase keluhan agak sakit sebesar 60% pada punggung, 48% pada pinggang dan 52 % pada bagian lengan kanan atas. Penelitian ini menggunakan metode Rapid Entire Body Assessment (REBA) untuk mengukur keseluruhan postur bagian tubuh pekerja yang bertujuan untuk mengetahui tingkat risiko stasiun kerja di departemen staining finishing. Hasil pengolahan REBA diketahui bahwa stasiun kerja staining dan stasin kerja soft sanding memiliki skor tertinggi dengar skor 7 pada stasiun kerja staining dan skor 5 pada stasiun kerja soft sanding hal ini menunjukkan tingkat risiko medium yang berarti perlu adanya perbaikan stasiun kerja untuk menghindari kemungkinan resiko Muskuloskeletal Disorders (MSDs).
Downloads
References
Anisah, Yuliarty, P., & Anggraini, R. (2018). Perancangan Tempat Wudhu Ergonomis Berdasarkan Antropometri Pengguna . ( Studi Kasus Pada Mall Abc ,. Vol. 13(3), 284–290. https://publikasi.mercubuana.ac.id/index.php/pasti/article/view/4982
Ansari, N. A., & Sheikh, D. M. J. (2014). Evaluation of work Posture by RULAfile:///C:/Users/User/Desktop/FYP/REBA evaluation on garage worker A case study.pdf and REBA: A Case Study. IOSR Journal of Mechanical and Civil Engineering, Vol. 11(4), 18–23.
Blunt, F. J. (2005). Occupational health and safety. New Developments in Advanced Welding, 270–291. https://doi.org/10.1533/9781845690892.270
Kurniawidjaja, L. M., Purnomo, E., Maretti, N., & Pujiriani, I. (2014). Pengendalian Risiko Ergonomi Kasus Low Back Pain pada Perawat di Rumah Sakit. Majalah Kedokteran Bandung, Vol. 46(4), 225–233. https://doi.org/10.15395/mkb.v46n4.342
Rahdiana, N. (2018). Identifikasi Risiko Ergonomi Operator Mesin Potong Guillotine Dengan Metode Nordic Body Map (Studi Kasus Di Pt. Xzy). Industry Xplore, Vol. 2(1), 1–12. https://doi.org/10.36805/teknikindustri.v2i1.185
Rofieq, M., Erliana, K., Wiati, N. M., & Hariyanto, S. (2019). The Work Posture Evaluation at Assembly Work Station in MSEs of Silver Jewelry Handicraft with the REBA Method. 17(Icoemis), Vol. 87–94. https://doi.org/10.2991/icoemis-19.2019.13
S.M, Q. (2013). An ergonomic study of work related musculoskeletal disorder risks in Indian Saw Mills. IOSR Journal of Mechanical and Civil Engineering, Vol. 7(5), 07–13. https://doi.org/10.9790/1684-0750713
Sofyan, D. K., & Amir. (2019). Determination of Musculoskeletal Disorders (MSDs) complaints level with Nordic Body Map (NBM). IOP Conference Series: Materials Science and Engineering, Vol. 505(1). https://doi.org/10.1088/1757-899X/505/1/012033
Welch, A., Healy, G., Straker, L., Comans, T., O’Leary, S., Melloh, M., Sjøgaard, G., Pereira, M., Chen, X., & Johnston, V. (2020). Process evaluation of a workplace-based health promotion and exercise cluster-randomised trial to increase productivity and reduce neck pain in office workers: A RE-AIM approach. BMC Public Health, Vol. 20(1), 1–15. https://doi.org/10.1186/s12889-020-8208-9
Yuliarty, P., & Soegiyanto, S. (2017). Analisis Tingkat Risiko Ergonomi Pada Poin Kerja Chassis and Tire Dengan Metode Rapid Entire Body Assessment (REBA) Di Departemen Assembly Frame PT X (Industri Perakitan Mobil). Seminar Nasional Sains Dan Teknologi, November, 1–11.
Yuliarty, P., & Wibowo, A. (2019). Tingkat Risiko Pekerja Pada Mesin Piercing Tube Dengan Menggunakan Metode Rapid Entire Body Assessment (Reba) Dan Rapid Upper Limb Assessment (Rula) Di Departemen Press Shop Pt. X. Industri Inovatif : Jurnal Teknik Industri, Vol. 9(1), 30–37. https://doi.org/10.36040/industri.v9i1.379
Zakaria Purnama, P., Budiharti, N., Priyasmanu, T., Program, ), Teknik, S., & S1, I. (2020). Rancang Bangun Mesin Oven Kopi Dengan Prinsip Qfd Dan Ergonomi. Jurnal Mahasiswa Teknik Industri, Vol. 3(2), 25–31.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
