PEMBUATAN PROGRAM MACHINING TIME GUARD MESIN CNC UNTUK MENJAGA CYCLE TIME MESIN PADA PROSES PRODUKSI SEPEDA MOTOR MATIC
DOI:
https://doi.org/10.22441/pasti.2022.v16i1.009Keywords:
Produksi, Cycle Time, PDCA, Machining Time, AlarmAbstract
Perusahaan tempat dilakukan penelitian ini adalah PT. X yang bergerak dibidang manufaktur kendaraan roda dua yang terletak di Jakarta. Permasalahan yang terjadi di PT. X saat ini adalah salah satunya cycle time produksi yang melebihi standar. Tujuan penelitian ini adalah untuk mengetahui apa saja penyebab Cycle Time yang melebihi standar, menemukan solusi permasalahan Cycle Time agar selalu dalam keadaan standar, mengetahui hasil penerapan perbaikan yang dilakukan. Dalam pelaksanaan penelitian ini, digunakan konsep Kaizen dengan pendekatan metode PDCA untuk menyelesaikan serta mengendalikan suatu permasalahan dengan pola yang runtun dan sistematis. Selain itu untuk kegiatan continuous improvement dalam rangka memperpendek alur kerja dan menghapuskan pemborosan ditempat kerja dan meningkatkan produktivitas. Hasil dari penelitian ini berupa program machining time guard yang berguna untuk menjaga cycle time agar tetap dalam kondisi standar. Program machining time akan memberikan sinyal alarm apabila machining time melebihi atau kurang dari standar.
Downloads
References
Amrina, U., Junaedi, D., & Prasetyo, E. (2018). Setup Reduction in Injection Moulding Machine Type JT220RAD by Applying Single Minutes Exchange of Die (SMED). IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899X/453/1/012033
Budiyanto, E., Yuono, L. D., & Farindra, A. (2019). Upaya Peningkatan Kualitas dan Kapasitas Produksi Mesin Pengupas Kulit Kopi Kering. Turbo : Jurnal Program Studi Teknik Mesin. https://doi.org/10.24127/trb.v8i1.926
Cholisana, A. (2019). Penurunan Error Proses Data Warranty di PT. ADM Menggunakan Metode PDCA (Studi Kasus : PT. Astra Daihatsu Motor, Jakarta). Jurnal PASTI, XIII(1), 96–105.
Hasan, S. H., Ahmad, A. N. A., & Feriyanto, D. (2015). COMPUTERIZED VALUE STREAM SYSTEM ( CVSS ) TO REDUCE WASTE IN LEAN MANUFACTURING OPERATION. 1(1), 13–18.
Hasanah, T. U., Wulansari, T., Putra, T., & Fauzi, M. (2020). Penerapan Lean Manufacturing dengan Metode Takt Time dan FMEA untuk Mengidentifikasi Waste pada Proses Produksi Steril PT.XYZ. Jurnal Rekayasa Sistem & Industri (JRSI). https://doi.org/10.25124/jrsi.v7i2.435
Hernadewita, & Rohimah, A. (2018). Lean manufacturing implementation using value stream mapping to eliminate seven waste in painting process. International Journal of Mechanical and Production Engineering Research and Development. https://doi.org/10.24247/ijmperdapr201974
Kholil, M., Almahdy, I., Fortinina, A., & Suparno, A. (2020). Implementation of Continuous Review System Method , Periodic Review System Method and Min-Max Method for Cheese Powder Inventory ( Case Study : PT . Mayora Indah TBK ). 01(2), 45–49. https://doi.org/10.37869/ijatec.v1i2.16
Kholil, M., & Rafsanjani, M. F. (2017). PENINGKATAN KAPASITAS PRODUKSI LINI PRODUKSI ED FRAME UNTUK MEMENUHI PERMINTAAN PASAR (Studi Kasus: PT. TMMIN). Jurnal Ilmiah Teknik Industri. https://doi.org/10.24912/jitiuntar.v3i2.498
Ngadono, T. S., Rokhim, M., & Ikatrinasari, Z. F. (2020). Lean manufacturing implementation on extrude process with value stream maping: Study case in tyre manufacture. IOP Conference Series: Materials Science and Engineering, 852(1). https://doi.org/10.1088/1757-899X/852/1/012104
Pogowonto, A., & Amrina, U. (2020). Reduction of Cycle Time in Vehicle Engine Assembly LineUsing Karakuri Kaizen. International Journal of Engineering Research and Advanced Technology. https://doi.org/10.31695/ijerat.2020.3657
Rimawan, E., & Haryono, A. (2017). Welding Process Improvement in Pressure Vessel Fabrication Approach to DMAIC Methodology case in Small and Medium Industries in Indonesia. International Journal of Scientific & Engineering Research.
Rosenberg, S. M. (2020). Kaizen. In The Digitalization of the 21st Century Supply Chain. https://doi.org/10.4324/9781003054818-5
Rozak, A., Shadrina, A., & Rimawan, E. (2019). Kaizenin world class automotive company with reduction of six big lossesin cylinder block machining line in Indonesia. International Journal of Innovative Science and Research Technology, 4(7), 339-344.
Setiawan, H., & Supriyadi, S. (2021). Perbaikan Kinerja Load Lugger dengan Menggunakan Siklus Plan-Do-Check-Action. Industri Inovatif : Jurnal Teknik Industri. https://doi.org/10.36040/industri.v11i2.3637
Yuliarty, P., & Kholiq, A. (2019). Peningkatan Produktivitas Produk Screw Pan M5X13Mm Pada Mesin Jbf-06403 Di Bagian Forming Dengan Metode Define, Measure, Analyze, Improve, Control (Dmaic) ( Studi Kasus Pt Garuda Metalindo ). Industri Inovatif : Jurnal Teknik Industri, 8(1), 32–37. https://doi.org/10.36040/industri.v8i1.671
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
