ANALISIS TINGKAT RISIKO PEKERJA PADA POIN KERJA HEADER PIPE DENGAN METODE RAPID ENTIRE BODY ASSESSMENT (REBA) DAN RAPID UPPER LIMB ASSESSMENT (RULA)
DOI:
https://doi.org/10.22441/pasti.2019.v13i3.006Keywords:
RULA, REBA, NBM, Risiko Pekerja, ErgonomiAbstract
Kenyamanan dan keamanan di tempat kerja harus diwujudkan karena karyawan sangat rentan mengalami kecelakan ketika bekerja. Hal ini tentu membuat adanya banyak kerugian seperti biaya, waktu, efisisensi dan efektivitas kerja serta berakibat pada produktivitas kerja yang menurun. Banyak hal yang harus diperhatikan di dalam line produksi agar line produksi bisa di jadikan tempat yang aman dan nyaman. Rumusan masalah dalam penelitian ini adalah berapa tingkat risiko ergonomi terhadap proses produksi pada karyawan di departemen (Press Shop) PT. X. Tujuan dari penelitian ini adalah rekomendasi perbaikan yang tepat untuk mengurangi / menyelesaikan permasalahan karyawan terhadap keletihan pada karyawan didepartemen Press Shop di PT. X. Metode yang digunakan pada penelitian ini adalah REBA, RULA serta kuisioner NBM. Untuk menghitung nilai skor RULA dan REBA peneliti menggunakan software RULA REBA Assessment pada tiap pengamatan aktifitas produksi. Solusi perbaikan dari hasil data penelitian yaitu perbaikan terhadap edikasi terhadap operator, perbaikan pada posisi layout kerja dan membuat modifikasi meja pada mesin.
Downloads
References
Agustian, Deris Yusuf, and Tri Susanto,. Analisis Beban Kerja Fisiologis Dan Postur Kerja Manual Material Handling Pada Pekerja Packaging, 2014, Jurnal Teknik Industri Page : 1054-1059
Alatas.Haidar.Anisah.,Putri. Kalista.Jammah.Roudhotul., 2017., Identifikasi Human Eror Pada Proses Produksi Cassava Chips Dengan Menggunakan Metode Sherpa Dan Heart Di PT. Indofood Fritolay Makmur,. Jurnal PASTI Vol 11 No 1
Ansari, A N, and M J Sheikh,.Evaluation of work Posture by RULA and REBA: A Case Study, 2014, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ISSN: 2320-334X, Volume 11, Issue 4, Page : 18-23.
Ashwin, Bhandare, Bahirat Pariotosh , Nagarkar Vishar , and Bewoor Anand,. 2013, Postural Analysis And Quantification Of Fatigue By Using Rula And Reba Techniques,. International Journal of Mechanical and Production Engineering, ISSN: 2320-2092, Page : 46-50.
E. Nurmianto, 2008,. Ergonomi Konsep Dasar Dan Aplikasinya. Surabaya: Guna Widya
Mardiansyah,. 2016, Analisis Postur Kerja Untuk Mengurangi Risiko Musculoskletelal Disorders Menggunakan Metode Rapid Upper Limb Assessment (Rula)." Plant Press Shop PT Bakrie Metal Industries, page 58-64.
Santoso, G, 2014. Ergonomi Manusia, Peralatan dan Lingkungan. Jakarta: Prestasi Pustaka.
Sativani, Z. www.ja.scribd.com. 7 13, 2010. www.ja.scribd.com/doc/130793132/myalgia-otot. (accessed 8 2, 2017).
Sitihang.Pangihutan.Ericfrans.,Norita. Defi,. Analisa Gerak Dan Waktu Kerja, Sampel Inkubasi Teh Botol Sosro Kemasan Kotak, 2015, PASTI, Vol 9 No,1
Srikanth, Chakravarthya, K.M Subbaiah, and G.L Shekar., 2015, Ergonomic Assessment And Risk Reduction Of Automobile Assembly Tasks Using Postural Assessment Tools,. International Journal Of Research Science & Management, Page : 38 - 42.
Sultan, Tanjung,.2015, Analisis Postur Kerja Menggunakan Metode Rula Untuk Mengurangi Risiko Musculoskeletal Disorders." Studi Kasus pada Pekerja di Plant KT-24, Page : 5-17.
Surinder, Singh, Singh Amanjot, and Lal Harvinder,. 2013,.A Proposed REBA on Small Scale Forging Industry,. International Journal of Modern Engineering Research (IJMER), Page : 3796 - 3802.
Sutrio, and Oktri Firdaus Mohammad,. 2011,. Analisis Pengukuran RULA dan REBA Petugas pada." Prosiding Seminar Nasional Ritektra , page : 203 - 210.
Tarwinder, Singh, and Singh Jaswinder,.2012,. Ergonomic Evaluation Of Industrial Tasks In Indian,.International Journal of Science and Research (IJSR) Volume 3 Issue 7, Page: 1056 - 1059.
Tommy,.2013,. Artikel Myalgia." Seputar Media Internal HPME, Page : 9.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
