Analisis Kelayakan Proyek Pengelolaan Limbah Drilling Cutting di Perusahaan Manufaktur Semen
DOI:
https://doi.org/10.22441/pasti.2023.v17i1.009Keywords:
Analisis Kelayakan Proyek, Limbah B3, Drilling cuttingAbstract
Perusahaan manufaktur semen di Jawa Barat sedang mengerjakan proyek pengelolaan limbah drilling cutting dengan rata-rata kapasitas pengiriman limbah adalah sebanyak 2,500 – 4,000 ton selama 2-3 bulan. Penelitian ini bertujuan untuk menentukan kelayakan proyek berdasarkan aspek finansial dan non-finansial. Dari hasil penelitian diperoleh keuntungan sebesar Rp. 42,900,289,588, BCR 1.17 dan NPV 33,207,124,345. Dari aspek hukum, perusahaan manufaktur semen sudah memiliki dokumen ijin sebagai perusahaan pemanfaat limbah. Dari aspek teknis, teknologi co-processing yang digunakan dalam pemanfaatan limbah sudah cukup efektif mengurangi jumlah limbah industri dan emisi. Dari aspek manajemen, proyek pengelolaan limbah drilling cutting ini melibatkan sebanyak 102 tenaga kerja sesuai dengan kapasitas yang diperlukan, dan tidak ada perubahan struktur organisasi selama proyek berlangsung. Dari aspek lingkungan dan sosial, proyek ini dapat mengurangi jumlah limbah B3 di lingkungan, mengurangi konsumsi bahan baku pembuatan semen yang berasal dari alam seperti batu kapur, pasir silika, shale dan pasir besi.
Downloads
References
Afiyah, A., Saifi, M. & Dwiatmanto. (2015). Analisis Studi Kelayakan Usaha Pendirian Home Industry Studi Kasus pada Home Industry Cokelat “Cozy” Kademangan Blitar. Jurnal Administrasi Bisnis, Vol. 23 (1), 1–11.
Amrina, U., & Firdaus, A. (2020). The Selection Of Productivity Key Performance Indicators For Car Manufacturing Companies Using Integrated Performance Measurement System. SINERGI Vol.22 No.2 June 2018, pp 101-106.
Dimyati, H., & Nurjaman, K. (2014). Manajemen Proyek. Bandung: CV Pustaka Setia.
Ewall, M dan Nicholson, K. (2005). Hazardous Waste and Tire Incineration in the U.S. and Mexican Cement Industries: Environmental and Health Problems, Energy Justice Network, Nov 2005; updated Nov 2007.
Gaol, L. A. R. L. (2013). Analisa Kelayakan Teknis dan Finansial pada Proyek Apartemen Dian Regency. Jurnal Teknik Pomits Vol. 2, (1), 58-62.
Hernadewita, Rahman, M. N. A., Deros, B. M. (2007). Penanganan Limbah Industri Cat Ditinjau Dari Sisi Clean Technology Dalam Manajemen Industri. Jurnal Teknik Mesin, Vol 4 No 2, pp. 108-113.
Kasmir & Jakfar. (2003). Studi Kelayakan Bisnis. Jakarta: Predana Media.
Menteri Lingkungan Hidup dan Kehutanan Republik Indonesia. Nomor P.4/MENLHK/SETJEN/KUM.1/1/2020 tentang Pengangkutan Limbah Bahan Berbahaya dan Beracun.
Nørskov, L. , Dam-Johansen, K., Glarborg, P., Larsen, M.B., Hjuler, K., dan Smidth, F.L. (2009). Fuel Flexible Burners in Cement and Mineral Industry. CHEC Annual Day, 01 Oktober 2009
Prasetya, H., & Sri, F. H. (2017). Analisis Teknis dan Finansial Proyek Pembangunan Apartemen U-Residence 3 Karawaci Tangerang Selatan. e-Jurnal Matriks Teknik Sipil, Vol. 5 (3), 990-998.
Presiden Republik Indonesia. Peraturan Pemerintah Nomor 101 tahun 2014 tentang Pengelolaan Limbah Bahan Berbahaya dan Beracun.
Soeharto, I. (1999). Manajemen Proyek: Dari Konseptual Sampai Operasional. Jilid 1. Jakarta: Erlangga.
Undang-Undang Republik Indonesia. Nomor 32 tahun 2009 tentang Perlindungan dan Pengelolaan Lingkungan Hidup.
Wakka, A. K. (2008). Analisa Kelayakan Finansial Usaha Industri Rumah Tangga Dalam Pembuatan Produk Nata Lontar. Jurnal Penelitian Sosial dan Ekonomi Kehutanan, Vol. 5 (2), 83-94.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
