Implementasi Metode Six Sigma untuk Mengurangi Defect pada Proses Produksi Kemasan Kopi Instan Butiran Coklat di PT. XYZ

Arief Suwandi, Roesfianjah Rasjidin, M. Derajat Amperajaya, Abdul Cholik

Abstract


PT. XYZ memproduksi berbagai jenis kopi  dimana  produk kopi instan butiran coklat merupakan produk yang paling diminati baik lokal maupun ekspor. Terdapat banyak variasi kemasan dalam produksi butiran coklat yang ditambahkan ke kopi instan dan dengan menggunakan Key Performance Indicators (KPI), ditentukan bahwa penggunaan bahan pengemas produk Chocogranule menghasilkan tingkat waste atau error yang tinggi sebesar 1,44% (nilai indikatif 0,7%).  Penelitian bertujuan mengatasi masalah dengan memperbaiki proses produksi sehingga mengurangi limbah kemasan butiran coklat. Perusahaan dapat mengetahui dengan jelas kualitas produk yang diproduksi dan posisi kualitas produk di pasar. Penerapan metode Six Sigma dapat meningkatkan kinerja mesin dan volume penjualan dengan mengurangi jumlah produk cacat, dan penggunaan 5W + 2H menghasilkan faktor penyebab cacat pada produk butiran coklat.


Keywords


kualitas; defect; six sigma; kemasan; mesin; produksi

Full Text:

PDF

References


Christopher Glenn, Jannice Lieora, Ryan Gani, J. J. L. (2021). Pengembangan Bentuk Kemasan sebagai Peningkatan Kualitas. Junnal Pemberdayaan Masyarkat, Vol 3(No. 2). https://www.bing.com/search?pglt=41&q=bandeng+isi+iteung&cvid=7ebb653ed26f4268acec96b3a95260ca&aqs=edge..69i57.6624j0j1&FORM=ANAB01&DAF0=1&PC=EDGEDB

Hendra, S., Setiawan, I., Suroto, K., Setiyawan, A., & Wahono, A. M. (2021). The Effect of Quality and Price on Satisfaction and Impact on Consumer Loyalty. JIME (Journal of Industrial and Manufacture Engineering), 6(1), 2549–6336. https://doi.org/10.31289/jime.v6i1.7047

Khuong, M. N., & My Hong, T. (2016). The Impact of Product Packaging Design on Consumer Repurchase Intention — A Study of VinaMilk, Vietnam. International Journal of Innovation, Management and Technology, 7(5), 219–223. https://doi.org/10.18178/ijimt.2016.7.5.676

Kurilova-Palisaitiene, J., Sundin, E., & Poksinska, B. (2018). Remanufacturing challenges and possible lean improvements. Journal of Cleaner Production, 172, 3225–3236. https://doi.org/10.1016/j.jclepro.2017.11.023

Madhani, P. M. (2016). Application of Six Sigma in Supply Chain Management: Evaluation and Measurement Approach. The IUP Journal of Supply Chain Management, 13(3), 34–53. http://ssrn.com/abstract=2851301Electroniccopyavailableat:https://ssrn.com/abstract=2851301

Mamah, S. (2019). A Method for Damage Detection in the Packaging Materials. Journal of Scientific and Engineering Research, March. https://www.researchgate.net/publication/331857361%0AA

Mulyawan, I. B., Handayani, B. R., Dipokusumo, B., Werdiningsih, W., & Siska, A. I. (2019). Pengaruh Teknik Pengemasan Dan Jenis Kemasan Terhadap Mutu Dan Daya Simpan Ikan Pindang Bumbu Kuning. Jurnal Pengolahan Hasil Perikanan Indonesia, 22(3), 464–475.

Neyestani, B. (2017). Seven Basic Tools of Quality Control: An Appropriate Tools for Solving Quality Problems in the Organizations. MPRA, Munich Personal RePEc Archive Seven, 77681, 16–23. https://doi.org/https://doi.org/10.5281/zenodo.400832

Radha Krishnan, B., & Prasath, K. A. (2013). Six Sigma Concept and Dmaic Implementation. International Journal of Business, March, 111–114.

Reguia, C. (2014). Product Innovatıon And The Competıtıve Advantage. European Scientific Journa, 1(June), 140–157.

Sahelangi, M. M., Mei, L., Wulandari, C., Industri, T., Teknik, F., Katolik, U., & Cendika, D. (2023). Metode Six Sigma Pada Kemasan Produk X di PT GF. 6, 1–8.

Srinivasan, K., Muthu, S., Prasad, N. K., & Satheesh, G. (2014). Reduction of paint line defects in shock absorber through Six Sigma DMAIC phases. Procedia Engineering, 97, 1755–1764. https://doi.org/10.1016/j.proeng.2014.12.327

Suwandi, A., Zagloel, T. Y., & Hidayatno, A. (2017). Enhancing the Quality of Industrial Output in Indonesia – An Analysis of Factors Causing Defective Bolt Stud Cylinder Products. LIFEWAYS International Journal of Society, Development and Environment in the Developing World, 1(3), 62–72.

Suwandi, A., Zagloel, T. Y., & Hidayatno, A. (2021). Risk Control Failure of Iron Pipes in Finished Goods Warehouses using Dynamic Systems. International Journal of Technology, 12(1), 15–21. https://doi.org/10.14716/ijtech.v12i1.4068

Wyrwa, J., & Barska, A. (2017). Packaging as a Source of Information about Food Products. Procedia Engineering, 182, 770–779. https://doi.org/10.1016/j.proeng.2017.03.199




DOI: http://dx.doi.org/10.22441/pasti.2023.v17i2.004

Refbacks

  • There are currently no refbacks.


Jurnal PASTI (Penelitian dan Aplikasi Sistem dan Teknik Industri)
Teknik Industri, Fakultas Teknik, Universitas Mercu Buana
Jl. Meruya Selatan, Kembangan, Jakarta Barat 11650
Tlp./Fax: +62215871335
p-ISSN: 2085-5869 / e-ISSN: 2598-4853
http://journal.mercubuana.ac.id/index.php/pasti/

 

This journal is accredited:

This journal is indexed by:

     

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Web Analytics Made Easy - StatCounter
View My Stats