PENGUKURAN PRODUKTIVITAS PADA DIVISI HOT STRIP MILL (HSM) DENGAN MENGGUNAKAN METODE OREGON PRODUCTIVITY MATRIX (OPM) DI INDUSTRI BAJA
DOI:
https://doi.org/10.22441/pasti.2021.v15i3.010Keywords:
Produktivitas, Oregon Productivity Matrix, Fault Tree AnalysisAbstract
PT. YZ merupakan sebuah industri yang bergerak dalam pembuatan baja dengan permasalahan terhadap produktivitas. Divisi Hot Strip Mill bertugas memproduksi slab sering mengalami permasalahan target produksi yang tidak tercapai dari rencana produksi mengakibatkan rendahnya produktivitas perusahaan tersebut. Tujuan dari penelitian ini adalah untuk menganalisis foktor-faktor yang berpengaruh pada produktivitas proses produksi dan mengakibatkan indeks performasi yang menurun sehingga dapat dilakukan perbaikan. Metode yang digunakan untuk pengukuran produktivitas merupakan Oregon Productivity Matrix (OPM) karena memiliki kelebihan interpretasi hasil yang mudah dipahami, fleksibel dan dapat diterapkan di berbagai perusahaan. pengujian kriteria dengan uji korelasi dan pembobotan dalam kriteria menggunakan Analitycal Hierarci Process (AHP). Berdasarkan hasil pengukuran produktivitas diperoleh bahwa index aktual masih berada jauh dibawah dari rencana target perusahaan, terdapat 4 kriteria yang diprioritaskan untuk dilakukan nya perbaikan yaitu pada kriteria penggunaan bahan baku sebesar 25,62%, kriteria target produksi sebesar 48,05%, kriteria produk defect sebesar 65,29%, dan kriteria mesin breakdown sebesar 76,78%.
Downloads
References
Gasperz, Vincent. (1998). Manajemen Produktivitas Total Strategi Peningkatan Bisnis Global. Jakarta: PT Gramedia Pustaka
Hakim, Arman. (2006). Manajemen Industri. Yogyakarta: Penerbit Andi
Ramasesh, S. (2006). Measuring Team Productivity Using Oregpn Productivity Matrix. India: Nashville
Ravianto, J. (1985). Produktivitas dan Manusia Indonesia. Jakarta: SIUPP.
Ravianto J, Rensius Nainggolan dkk. (1988). Dasar-dasar Produktivitas. Jakarta: Komunika Universitas Terbuka.
Ravianto, J. (2001). Manual Perbaikan Produktivitas. Jakarta: UDP
Riggs, James. (1983). Productivity by Objectives, Printice Hall Inc: Engle-Wood Cliffs.
Simanjuntak, P Payaman. (1995). Pengantar Ekonomi Sumber Daya Manusia. Jakarta: Lembaga Penerbit Fakultas Ekonomi Universitas Indonesia
Sinungan, Muchdarsyah. (1987). Produktivitas Apa dan Bagaimana. Jakarta: Aksara Persada Press
Summanth, David J. (1984). Productivity Engineering and Management. New York: Mc Graw-Hill Book Company.
Supranto. (2009). Sains Manajemen. Analisis Kuantitatif Untuk Pengambilan Keputusan. Jakarta : GramediaWidiasarana Indonesia.
Syarif, Rusli. (1991). Seri Manajemen dan Produktivitas. Bandung: Angkasa.
Thomas, L Saaty. (1993). Pengambilan Keputusan bagi para Pemimpin. Jakarta: Pustaka Binaman Pressindo.
Wibawa, Ari. (2016). Sistem Pengambilan Keputusan. Yogyakarta : Graha Ilmu.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
