OPTIMIZATION IN QUALITY OF SERVICE FOR LTE NETWORK USING BANDWIDTH EXPANSION

Authors

  • Fadli Sirait Department of Electrical Engineering, Universitas Mercu Buana
  • Akhmad Wahyu Dani Department of Electrical Engineering, Universitas Mercu Buana
  • Yuliza Yuliza Department of Electrical Engineering, Universitas Mercu Buana
  • Ulil Albab Department of Electrical Engineering, Universitas Mercu Buana

DOI:

https://doi.org/10.22441/sinergi.2019.1.007

Keywords:

LTE, MIMO, QoS, Congestion, Utilization, Peak Data Rate

Abstract

QoS (Quality of Service) of LTE networks can bring the providers to provide broadband services with high performance to end user.  Furthermore, the expected data rate transfer is up to 300 Mbit/s per user while the range of bandwidth varies from 1.4 MHz to 20 MHz.  The network worked in 1800 MHz bands, 64 QAM modulation technique and used 10 MHz and 15 MHz channel bandwidth.  There is a congestion problem for LTE network with 10 MHz channel bandwidth due to high utilization.  The paper tries to analyze the QoS parameters, named Key Performance Indicators (KPI) for LTE Networks to solve the problem using bandwidth expansion. The KPIs parameter that is measured by drive test is accessibility, retainability, PRB downlink utilization, and user number.  Based on the KPIs measurements results, it is showed that the proposed method to expand the bandwidth from 10 MHz to 15 MHz can avoid congestion problem and impact on improving the performance of LTE network.

Downloads

Download data is not yet available.

Downloads

Published

2019-02-27

How to Cite

[1]
F. Sirait, A. W. Dani, Y. Yuliza, and U. Albab, “OPTIMIZATION IN QUALITY OF SERVICE FOR LTE NETWORK USING BANDWIDTH EXPANSION”, Sinergi, vol. 23, no. 1, pp. 47–54, Feb. 2019.

Issue

Section

Articles

Most read articles by the same author(s)

Similar Articles

> >> 

You may also start an advanced similarity search for this article.