Implementation of Objective Matrix and Root Cause Analysis for Productivity Analysis PT. Indomarco Adi Prima SP Deket Lamongan
DOI:
https://doi.org/10.22441/ijiem.v4i3.21715Kata Kunci:
Productivity, Objective matrix, Root cause analysisis, Fishbone diagram, 5 Whys methodAbstrak
PT Indomarco Adi Prima Stock Point Deket Lamongan is one of the business units of PT Indofood Sukses Makmur Tbk, which distributes consumer products. The company has 300 outlets in grocery stores and modern stores with a distribution target of 30 outlets for each salesman in a day. However, in its implementation, the target is only sometimes achieved. Other problems, such as product delivery errors and delivery delays, occur frequently. This research aims to analyze the company's productivity level using the Objective Matrix (OMAX) method. Productivity measurement also involves the Analytical Hierarchy Process (AHP) method in determining the weight of each ratio. Based on the calculation of productivity during the measurement period from January 2022 to December 2022 using Objective Matrix (OMAX), the results obtained are productivity index values that decreased during the measurement period, namely February (-4,75%), March (-3.90%), May (-17.48%), June (-11.92%), July (-31.28%), and October (-7.04%). Then, based on the results of productivity indicator analysis, it is known which ratio indicator has the lowest value and causes the productivity index to fall, namely ratio 1, ratio 2, ratio 5, ratio 6, and ratio 7. The decrease in productivity index based on Root Cause Analysis (RCA) using fishbone diagram tools due to no heat reducer, no computer and truck maintenance schedule, less communication between employees, travel time estimation is not good, attendance system updates are not carried out, limited warehouse area, high work intensity, no instructions for the preparation of goods in the warehouse area, stock goods arrive late, rainy season, road repairs, no periodic checks, and unpredictable road conditions.
Unduhan
Referensi
Gaspersz, V. (1998). Manajemen Produktivitas Total Strategi Peningkatan Produktivitas. Bisnis Global. Jakarta: Gramedia Pustaka Umum.
Handayani, R., (2015). Pemanfaatan Aplikasi Expert Choice Sebagai Alat Bantu dalam Pengambilan Keputusan (Studi Kasus: PT. BIT Teknologi Nusantara). Jurnal Pilar Nusa Mandiri, 11(1), 53-59. https://ejournal.nusamandiri.ac.id/index.php/pilar/article/view/412.
Nasution, A. H. (2005). Manajemen Industri (1st ed., pp. 1–481). Yogyakarta: ANDI.
Puteri, R. A. M. (2017). Pengukuran Produktivitas Parsial di PT. Aneka Cipta Sealindo. Jurnal Teknologi, 9(1), 13–20. https://doi.org/10.24853/jurtek.9.1.13-20.
Rooney, J. J., & Heuvel, L. N. V. (2004, July). Root Cause Analysis For Beginners. Quality Progress, pp. 45–53.
Sasongko, A., Astuti, I. F., & Maharani, S. (2017). Pemilihan Karyawan Baru Dengan Metode AHP (Analytic Hierarchy Process). Informatika Mulawarman : Jurnal Ilmiah Ilmu Komputer, 12(2), 88. https://doi.org/10.30872/jim.v12i2.650.
Satriani, N. N., Cholissodin, I., & Fauzi, M. A. (2018). Sistem Pendukung Keputusan Penentuan Calon Penerima Beasiswa PPA Menggunakan Metode AHP-PROMETHEE I (Studi Kasus: FILKOM Universitas Brawijaya). Jurnal Pengembangan Teknologi Informasi Dan Ilmu Komputer, 2(7), 2780–2788. https://j-ptiik.ub.ac.id/index.php/j ptiik/article/view/1693.
Tobing, B. (2018). Seven Basic Tools. Medan: PT. Medan Sugar Industry.Waluyo. (2008). Produktivitas Untuk Teknik Industri. Sidoarjo: Dian Samudra.
Wibisono, D. (2019). Analisis Produktivitas Dengan Menggunakan Pendekatan Metode Objective Matrix (OMAX) Studi Kasus di PT. XYZ. Jurnal Optimasi Teknik Industri (JOTI), 1(1), 1–7. http://dx.doi.org/10.30998/joti.v1i1.3423.
Unduhan
File Tambahan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
