CHARACTERIZATION OF IRON PRODUCTION FROM MILLS CALE BY CARBOTHERMIC REDUCTION
Abstract
Millscale is a large by product of metal factory. Many methods to recycled it to many applications. The aim of this research is recycled millscale to produce the iron by reduction method with graphite as reductant agent. The reduction process was deed by milled millscale and graphite powder with 4:1 weight ratio was by used High Energy Milling with 4, 6, 12 hours milling time variations. The powder then was characterized by X-Ray Diffraction (XRD), Vibrating Sample Magnetometer (VSM) and SEM-EDS test. The XRD test result is Fe3C as a main phase then carbon, magnetite, wustite and Iron as a minor phase. The percentage of iron composition is increase during milling times amount to 6; 10.9; 13 %. The remanence for the 4, 6, and 12 hours of milling time variation, is 2.89, 3.39, and 4.98 emu/g, for the coercivity (Hc) is 209.58, 188.47, and 223.65 Oe and the magnetic saturation number is 22.59, 30.7, 39.15 emu/g, from Hc value it is concluded that the powder has superparamagnetic behavior. From SEM-EDS is knowed that the distribution of Fe is more uniform on the surface samples with the increase of milling time.
Keywords
Full Text:
PDFReferences
N. M. H. Mohamed, N. A. Al-Husseiny, M. G. E. Khalifa, S. S. A. El-Rahim , M. E. H. Shalabi, ‘’The Effect of Addition of Mill Scale Oxide Fine and El Dekhilla Fine Pellets on Reduction of El-Baharia Iron Ore Pellets Via Hydrogen – Reaction Controlled Kinetics,’’ International Journal of Multidisciplinary Research and Publications. 2018;1:1-5.
M. Bugdayci, G. Deniz, C. Ziyreker, A. Turan, L. Oncel, ‘’Thermodynamic modeling and production of FeCo alloy from mill scale through metallothermic reduction,’’ Engineering Science and Technology, an International Journal. 2020;23:1259-1265.
D. S. Khaerudini, I. Chanif, D. R. Insiyanda, F. Destyorini, S. Alva, A. Pramono, “Preparation and Characterization of Mill Scale Industrial Waste Reduced by Biomass Based Carbon,’’ Journal of Sustainable Metallurgy. 2019;5:510–518.
E.M.A. Hamid, Sh.K. Amin, H.A. Sibak, M.F. Abadir,” Thermodynamic modeling and production of FeCo alloy from mill scale through metallothermic reduction,’’ Engineering Science and Technology, an International Journal. 2018;23: 3954-3965.
M. Bugdayci, G. Deniz, C. Ziyreker, A. Turan, L. Oncel, ‘’ Thermodynamic modeling and production of FeCo alloy from mill scale through metallothermic reduction,’’ Engineering Science and Technology, an International Journal. 2020;23:1259-1265.
L. F. Nurdiyansah, N. Darsono and D. S. Khaerudini, “Magnetite Adsorption and Oxidation from Mill Scale for Textile Wastewater Treatment,’’ AIP Conference Proceedings. 2020.
N. A. El-Hussiny, F. M. Mohamed, and M. E. H. Shalabi, “Recycling of Mill Scale in Sintering Process,’’ Science of Sintering. 2011;43:21-31.
M. Bugdayci, M. Alkan, A. Turan, O Yücel, ‘’Production of Iron Based Alloys from Mill Scale through Metallothermic Reduction,’’ High Temp. Mater. Proc. 2018;37:889–898.
M.Z. Ruhiyuddin, D. Murizam, K. R. Ahmad, ’’Synthesis and Characterization of Iron Produced From Iron Mill Scale,’’ Key Engineering Materials. 2014;594-595:118-122.
O. Benchiheub, S. Mechachti, S. Serrai, M.G. Khalifa, “Elaboration of iron powder from mill scale,” J. Mater. Environ. Sci. 1. 2010;4:267-276.
K. S. Sista, S. Dwarapudi and V. P. Nerune, “Direct Reduction Recycling of Mill Scale Through Iron Powder Synthesis,’’ ISIJ International, Advance Publication by J-STAGE. 2019:1-8.
Rahul Sen, U Pandel, ‘’Conceptual kinetic study for the catalytic effect of limestone on mill scale reduction by low grade coal,’’ Powder Technology. 2020;378:510-520.
D. Nayak, S. K. Roy, N. Dash, S. S. Rath, “Investigation on the Coal-Based Direct Reduction of Mill Scale Pellets: Statistical Modeling and Characterization Studies,” Trans Indian Inst Met. 2020;73:691–701.
N. Gade, G. Verma, R. Sen, U. Pandel, “Effect of Calcium Carbonate on the Reduction Behaviour of Mill Scale,” Procedia Earth and Planetary Science. 2015;11:319 – 324.
A. Kumar, V. R. Kiragi, S. Kumar, A. Patnaik, V. Kumar, M. K. Banerjee, Mining, Metallurgy & Exploration. 2020;37:1741–1751.
R. Sen, A. Maan, U. Goyal, A. Birdhaniya, U. Pandel, “In crucible reduction of mill scale by lean grade coal: Study of time, temperature and arrangement for optimum reduction conditions, “ Materials Today: Proceedings. 2018;5:7256–7263.
J.J. Moore, “Chemical Metallurgy’’ Elsevier. 1990:243-30.
DOI: http://dx.doi.org/10.22441/ijimeam.v3i1.11575
Refbacks
- There are currently no refbacks.
Copyright (c) 2021 Lukman Faris Nurdiyansah, Nono Darsono, Deni Shidqi Khaerudini
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
INDEXED IN
Publisher Address:
Universitas Mercu Buana
Program Studi S2 Teknik Mesin
Jl. Meruya Selatan No. 1, Jakarta 11650, Indonesia
Phone/Fax. (+6221) 5871335
Email [email protected]
Homepage http://teknikmesin.ft.mercubuana.ac.id/
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.