EFFECT OF DISCHARGE VARIATION ON THE PERFORMANCE OF SINGLE BLADE ARCHIMEDES SCREW TURBINE: PREDICTION WITH COMPUTATIONAL FLUID DYNAMIC

Gunawan Rudi Cahyono, Apip Amrullah, Pathur Razi Ansyah, N. Alexius Mikael, P.S.M. Reynaldi, Rusdi Rusdi

Abstract


Constructing a small-scale hydroelectric power station that can run efficiently at a head lower than 10 m is one possible method for reducing the impact of the electricity crisis in remote areas of Indonesia. The Archimedes Screw turbine is one type of turbine that is ideal for discharges below 10 m. In this study, the simulation results show that the value of Turbulences Kinetic Energy is directly proportional to the increase in flow rate but inversely proportional to the level of immersion. This type of turbine is unless well in Indonesia due to a lack of information regarding the application of low head power plants. The turbine model that is suitable for the low head is investigated in this study. Before being tested, the turbine is first designed theoretically and then numerically evaluated. With discharges of 1 l/s, 2 l/s, and 3 l/s and turbine immersion levels of 30%, 50%, and 70%, ANSYS CFD (Computational Fluid Dynamic) software was used to investigate flow rate and level of immersion in the turbine. According to the investigation findings, the discharge has a considerable impact on the turbine's movement; the higher the flow rate, the higher the power to the turbine, which produces a torque on the turbine. The simulation findings indicate that the value of Turbulence Kinetic Energy is proportional to the increase in flow rate but inversely proportional to the level of immersion.

Keywords


Discharge; Archimedes Screw Turbine; Performance; CFD

Full Text:

PDF

References


Date A, Akbarzadeh A. Design and cost analysis of low head simple reaction hydro turbine for remote area power supply. Renew Energy 2009;34:409–15. https://doi.org/10.1016/j.renene.2008.05.012.

Laghari JR. Climate change: Melting glaciers bring energy uncertainty. Nature 2013;502:617–8. https://doi.org/10.1038/502617a.

Rorres C. The Turn of the Screw: Optimal Design of an Archimedes Screw. J Hydraul Eng 2000;126:72–80. https://doi.org/10.1061/(asce)0733-9429(2000)126:1(72).

Williamson SJ, Stark BH, Booker JD. Low head pico hydro turbine selection using a multi-criteria analysis. Renew Energy 2014;61:43–50. https://doi.org/10.1016/j.renene.2012.06.020.

Kaldellis JK. The contribution of small hydro power stations to the electricity generation in Greece: Technical and economic considerations. Energy Policy 2007;35:2187–96. https://doi.org/10.1016/j.enpol.2006.06.021.

Bouvant M, Betancour J, Velásquez L, Rubio-Clemente A, Chica E. Design optimization of an Archimedes screw turbine for hydrokinetic applications using the response surface methodology. Renew Energy 2021;172:941–54. https://doi.org/10.1016/j.renene.2021.03.076.

Shahverdi K, Loni R, Maestre JM, Najafi G. CFD numerical simulation of Archimedes screw turbine with power output analysis. Ocean Eng 2021;231:108718. https://doi.org/10.1016/j.oceaneng.2021.108718.

Dellinger G, Garambois PA, Dellinger N, Dufresne M, Terfous A, Vazquez J, et al. Computational fluid dynamics modeling for the design of Archimedes Screw Generator. Renew Energy 2018;118:847–57. https://doi.org/10.1016/j.renene.2017.10.093.

Dellinger G, Simmons S, Lubitz WD, Garambois PA, Dellinger N. Effect of slope and number of blades on Archimedes screw generator power output. Renew Energy 2019;136:896–908. https://doi.org/10.1016/j.renene.2019.01.060.

Abdullah OS, Khalil WH, Kamel AH, Shareef AJ. Investigation of Physical and Numerical Model of Archimedes Screw Turbine. J Power Energy Eng 2020;08:26–42. https://doi.org/10.4236/jpee.2020.810003.

Suliaman O, Khalil WH, Kamel AH. Numerical and Experimental Modeling of Small Hydropower Turbine. ARPN J Eng Appl Sci 2020;15:2244–50.

Priyadi B. Design of Turbine Screw Model for Pico-Hydro. Am J Eng Res 2017:130–40.

Erinofiardi, Agus Nuramal, Putra Bismantolo, Abhijit Date, Aliakbar Akbarzadeh, Afdhal Kurniawan Mainil, Ahmad Fauzan Suryono, Experimental study of screw turbine performance based on different angle of inclination, Energy Procedia 110 ( 2017 ) 8 – 13

ANSYS Inc. ANSYS Theory Reference - Release 5.6. Theory Ref 1999:1–1286.

Sévin DC. Bachelor Thesis. Appl Sci 2010:44.

Kraybill Z. Structural Analysis of an Archimedes Screw and a Kinetic Hydro Turbine 2013.

Maulana MI, Syuhada A, Almas F. Computational fluid dynamic predictions on effects of screw number on performance of single blade Archimedes screw turbine. E3S Web Conf 2018;67.




DOI: http://dx.doi.org/10.22441/ijimeam.v3i2.12459

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Gunawan Rudi Cahyono, Apip Amrullah, Pathur Razi Ansyah, N. Alexius Mikael, P.S.M. Reynaldi, Rusdi Rusdi

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

INDEXED IN

 

Publisher Address:
Universitas Mercu Buana
Program Studi S2 Teknik Mesin
Jl. Meruya Selatan No. 1, Jakarta 11650, Indonesia
Phone/Fax. (+6221) 5871335
Email [email protected]
Homepage http://teknikmesin.ft.mercubuana.ac.id/

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.