ANALYSIS OF OIL ABSORPTION AND FRICTION COEFFICIENT OF BAMBOO POWDER, COCONUT POWDER, GLASS POWDER, AND COPPER POWDER COMPOSITES FOR CLUTCH PADS
Abstract
This study aims to determine the characteristics of the absorption test with SAE 10W-30 and the friction coefficient test with the ASTM D 3702-94 test standard on composite clutch pads made from bamboo powder, coconut powder, glass powder, and copper powder. It is based on the considerations that there are abundance of natural resources of bamboo and coconut with that is still not optimally utilized as well as the discovery of several hazardous clutch lining (asbestos) basic material properties. In each test, each composition variation was tested 3 times and from the data, the average value of the composition variation was taken. Based on this research, the specimen with the highest oil absorption value is specimen combination 3 (BB20KL20CU0KC20) with an absorption value of 17.98% and the specimen with the lowest absorption value is specimen combination 2 (BB20KL20CU5KC15) with an absorption value of 4.88%, and the specimen with the highest percentage change in volume is specimen combination 1 (BB20KL20CU10KC10) with a percentage of 3.30%, and the specimen with the lowest percentage change in volume is specimen combination 2 (BB20KL20CU5KC15) with a percentage of 1.01%. From the results of the combined friction coefficient test, specimen 3 (BB20KL20CU0KC20) has the highest friction coefficient value of 0.54526 and specimen 2 (BB20KL20CU5KC15) has the lowest friction coefficient value of 0.16923.
Keywords
Full Text:
PDFReferences
Sofwan, A. A., & Wijaya, M. B. R. (2019). Pengaruh penggunaan kampas kopling racing daytona terhadap performa mesin sepeda motor Honda Supra X 125. Jurnal Kompetensi Teknik, 11(2), 1-7.
Fitri, M., Mahzan, S., & Anggara, F. (2020). The mechanical properties requirement for polymer composite automotive parts - A review. Int. J. Adv. Technol. Mech. Mechatronics Mater, 1(3), 125-133.
Fitri, M., Sukiyono, B., & Simanjuntak, M. L. (2019). Pengaruh waktu penahanan pada perlakuan panas paska pengelasan terhadap ketangguhan sambungan las baja. SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, 13(2), 80-86.
Fitri, M. (2020). Pengaruh beban lentur pada poros stainless steel terhadap siklus kegagalan fatik. Jurnal Teknik Mesin, 9(3), 149-155.
Fitri, M., Susilo, T., Feriyanto, D., & Zago, D. M. (2021). Effect of morphology and percentage of second phase content of coconut coir on the impact strength of epoxy resin composites. Nat. Volatiles & Essent. Oils, 8(6), 3880-3894.
Fitri, M., & Mahzan, S. (2016). The effect of fibre content, fibre size and alkali treatment to charpy impact resistance of oil palm fibre reinforced composite material. IOP Conference Series: Materials Science and Engineering, 160(012030).
Pranoto, H., & Fitri, M. (2022). The effect of alkali treatment to mechanical properties of resin composite reinforced with coir coconut fiber. Journal of Mechanical Engineering (JMechE), 19(2), 65-78.
Fitri, M., & Mahzan, S. (2018). Influence of coupling agent and fibre treatment to mechanical properties of oil palm fibre reinforced polymer matrix composite. Journal of Mechanical Engineering (JMechE), 5(4), 223-232.
Fitri, M., Mahzan, S., Hidayat, I., & Nurato, N. (2021). The effect of coconut coir fiber powder content and hardener weight fractions on mechanical properties of an EPR-174 epoxy resin composite. Sinergi, 25(3), 361-370.
Fitri, M. Pengaruh prosentase serat kelapa sawit terhadap umur fatik beban aksial komposit matriks resin. ROTASI, 21(4), 215-223.
Fitri, M., & Mahzan, S. (2020). The regression models of impact strength of coir coconut fiber reinforcedresin matrix composite materials. Int. J. Adv. Technol. Mech. Mechatronics Mater, 1(1), 32-38.
Mahzan, S., Fitri, M., & Zaleha, M. (2017). UV radiation effect towards mechanical properties of natural fibre reinforced composite material: A review. IOP conference series: materials science and engineering, 165(012021).
Anggria, F., Nawangsari, P., & Masnur, D. (2016). Analisis pengaruh ukuran serbuk kaca pada pembuatan kanvas rem sepeda motor dengan pengisi serbuk piston bekas. Jurnal Online Mahasiswa (JOM) Bidang Teknik dan Sains, 3(2), 1-5.
Harmaji, A., & Ramadhan, A. W. (2022). Properties and morphological of mortar containing used engine oil. Int. J. Innov. Mech. Eng. Adv. Mater, 4(1), 12–16.
Ahmadi, Q. (2014). Karakterisasi mekanis bahan kampas kopling (clutch) sepeda motor dengan bahan serat kelapa, arang tempurung kelapa, serbuk aluminium dan resin phenolic [Doctoral dissertation, Universitas Muhammadiyah Surakarta]. Repository Universitas Muhammadiyah Surakarta.
Gibson, R. F. (2016). Principles of composite material mechanics. CRC press.
Hadi, Q., & Pratomo, J. (2015). Analisis pengaruh variasi fraksi volume terhadap sifat mekanik komposit hibrid poliester dengan filler alami serat sekam padi dan serat sabut kelapa. Jurnal Rekayasa Mesin, 15(3), 79-84.
Supriadi, S., Susilo, H., Mulia, Gunawan, S., & Saputra, N. (2022). Analisa pemanfaatan serat sabut kelapa dan serat bambu pada pembuatan kampas rem komposit dengan uji mekanis. RODA: Jurnal Pendidikan dan Teknologi Otomotif, 2(1), 49-60.
Hermawanto, A. (2012). Pengaruh variasi bahan terhadap sifat fisis dan sifat mekanis kopling gesek sepeda motor dengan bahan dasar serat bambu, serbuk limbah penggergajian baja, serbuk tembaga dan resin phenolic [Doctoral dissertation, Universitas Muhammadiyah Surakarta]. Repository Universitas Muhammadiyah Surakarta.
Hermawan, D. W., Masturi, M., & Yulianti, I. (2015). Ketahanan tekan komposit dari resin epoksi berpenguat serat bambu. Jurnal Fisika, 5(1).
Yazirin, C., Muhammad, A., Dika, J., Tsamroh, D., & Mudawamah. (2022). The effect of graphene oxide addition on magnetic properties of iron oxide (Fe2O3) nanopowder with sintering and non-sintering process. Int. J. Innov. Mech. Eng. Adv. Mater, 3(3), 112-117.
Olabisi, A. I., Adam, A. N., & Okechukwu, O. M. (2016). Development and assessment of composite brake pad using pulverized cocoa beans shells filler. International Journal of Materials Science and Applications, 5(2), 66-78.
DOI: http://dx.doi.org/10.22441/ijimeam.v4i2.18235
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 Iqbal Risyuma, Muhamad Fitri
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
INDEXED IN
Publisher Address:
Universitas Mercu Buana
Program Studi S2 Teknik Mesin
Jl. Meruya Selatan No. 1, Jakarta 11650, Indonesia
Phone/Fax. (+6221) 5871335
Email [email protected]
Homepage http://teknikmesin.ft.mercubuana.ac.id/
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.