Mechanical Properties Analysis of Stainless Steel 304 Linear Guide Rail Using Autodesk Inventor and MATLAB

Muhammad Azizi, Kurniawan Kurniawan, Deni Shidqi Khaerudini, Gerald Ensang Timuda, Nono Darsono, Nuwong Chollacoop

Abstract


This study investigates the mechanical properties of a stainless steel 304 linear guide rail using a combination of Autodesk Inventor and MATLAB. The primary objective is to analyze the von Mises stress distribution, displacement, and safety factor of the linear guide rail under varying load conditions, as well as to develop a model representing the relationship between stress and strain. A detailed 3D model of the guide rail was created using Autodesk Inventor, followed by finite element analysis (FEA) to evaluate stress and strain distribution across different sections of the rail. The simulation was conducted to assess the structural response under multiple loading scenarios, ensuring its reliability for real-world applications. Furthermore, a linear regression analysis was performed using MATLAB to establish a predictive model correlating stress and strain, enabling more accurate forecasting of the material's mechanical behavior. The results revealed that the maximum von Mises stress obtained from the simulation was 23.595 MPa, with a corresponding maximum displacement of 0.397 mm. The safety factor analysis confirmed the rail's structural integrity, with a minimum safety factor of 10.595, well above the failure threshold. These findings indicate that the linear guide rail meets the necessary mechanical performance requirements for its intended application.

Keywords


Linear guide rail; Finite Element Analysis (FEA); stainless steel 304; stress-strain relationship; MATLAB regression model

Full Text:

PDF

References


U. T. Abdurrahman, A. Jack, and F. Schmid, "Effects of platform screen doors on the overall railway system," in 8th International Conference on Railway Engineering (ICRE 2018), 2018 , p. 6, doi: 10.1049/cp.2018.0053.

J. Jumardi, R. R, A. Abdulhadi, A. Siska, V. A, and Z. AZ, “Perkembangan transportasi kereta api di Jakarta,” Jurnal Pattingalloang, vol. 7, no. 1, p. 40, 2020, doi: 10.26858/pattingalloang.v7i1.13291.

N. G. Harris and R. J. Anderson, “An international comparison of urban rail boarding and alighting rates,” Proceedings of the Institution of Me-chanical Engineers, Part F: Journal of Rail and Rapid Transit, vol. 221, no. 4, pp. 521–526, 2007, doi: 10.1243/09544097JRRT115.

A. Abdelfatah, A. M. Raslan, and L. Z. Mohamed, “Corrosion characteristics of 304 stainless steel in sodium chloride and sulfuric acid solu-tions,” International Journal of Electrochemical Science, vol. 17, 2022, doi: 10.20964/2022.04.29.

S. H. Lee, S. K. Lee, and B. M. Kim, “Study on the manufacturing process of precision linear guide rail through shape rolling and shape draw-ing,” Journal of Mechanical Science and Technology, vol. 24, no. 8, pp. 1647–1653, 2010, doi: 10.1007/s12206-010-0517-y.

W. Tao, Y. Zhong, H. Feng, and Y. Wang, “Model for wear prediction of roller linear guides,” Wear, vol. 305, no. 1–2, pp. 260–266, 2013, doi: 10.1016/j.wear.2013.01.047.

X. Chen, Y. Xie, Y. Wu, J. Bian, and C. Ma, “Effect of high-temperature molten salt corrosion on the mechanical properties of stainless steel,” International Journal of Corrosion Processes and Corrosion Control, vol. 59, no. 6, pp. 401–416, Sep. 2024, doi: 10.1177/1478422X241257318.

Q. Pan, S. Guo, F. Cui, L. Jing, and L. Lu, “Superior strength and ductility of 304 austenitic stainless steel with gradient dislocations,” Nano-materials, vol. 11, no. 10, p. 2613, Oct. 2021, doi: 10.3390/nano11102613.

M. Liu, C. Li, L. Liu, Y. Ye, D. Dastan, and H. Garmestani, “Inhibition of stress corrosion cracking in 304 Stainless Steel through Titanium ion implantation,” Materials Science and Technology, vol. 36, no. 3, pp. 284–292, Feb. 2020, doi: 10.1080/02670836.2019.1704527.

Sumarji, “Studi perbandingan ketahanan korosi Stainless Steel tipe SS 304 dan SS 201 menggunakan metode U-bend test secara siklik dengan variasi suhu dan Ph,” Jurnal Rotor, vol. 4, no. 1, pp. 1–8, 2011.

L. Ari, Merancang Komponen Roket 3D dengan Autodesk Inventor Professional 2017. Buku Katta, 2018.

A. H. Permata Ningtyas, K. Ayunaning, B. Arif Prambudiarto, I. Arifin Pahlawan, and I. Maulana, “Implementasi penggunaan software Autodesk Inventor dalam meningkatkan kompetensi dalam menggambar teknik pada pelajar kejuruan,” DedikasiMU : Journal of Community Service, vol. 3, no. 2, p. 925, 2021, doi: 10.30587/dedikasimu.v3i2.3259.

R. Romiyadi and W. S. Mustika, “Perancangan dan pembuatan mesin pengayak pasir tipe rotary kapasitas 30 m3/jam,” Jurnal Sains dan Ilmu Terapan, vol. 4, no. 2, pp. 12–16, 2021, doi: 10.59061/jsit.v4i2.45.

A. H. P. Ningtyas, B. A. Prambudiarto, K. Ayunaning, M. Khabib, R. P. Putra, and M. D. Cahyono, “Pelatihan software Autodesk Inventor dalam meningkatkan kompetensi siswa kejuruan,” JUSTI (Jurnal Sistem dan Teknik Industri), vol. 1, no. 4, p. 648, 2021, doi: 10.30587/justicb.v1i4.2940.

A. Tjolleng, M.Sc, Pengantar Pemrograman Matlab. Elex Media Komputindo, 2017.

M. Ariyanto and W. Caesarendra, Panduan Belajar Mandiri MATLAB, Elex Media Komputindo, 2011.

L. J. Chun, Y. C. Chiang, C. C. Ting, R. H. Ma, and S. L. Chen, “Pressure analysis of platform screen door subjected to a moving train in mass rapid transport underground station,” Journal of Mechanics, vol. 20, no. 2, pp. 159–166, 2004, doi: 10.1017/S1727719100003373.

A. D. Gonzalez-Delgado, A. Villabona-Ortíz, and C. Tejada-Tovar, “Model comparison and effect of flow and accessories on the pressure drop of the unit ff-df-270/el of Universidad de Cartagena,” Ingeniería Y Competitividad, vol. 25, no. 2, Jun. 2023, doi: 10.25100/iyc.v25i2.11663.

E. O. Awotona, A. O. Alade, S. A. Adebanjo, O. Duduyemi, and T. J. Afolabi, “Estimating moisture absorption kinetics of sword beans during soaking using Midilli model,” Engineering and Technology Research Journal, vol. 5, no. 2, pp. 76–80, 2020, doi: 10.47545/etrj.2020.5.2.067.




DOI: http://dx.doi.org/10.22441/ijimeam.v7i1.25355

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 M. Azizi, Kurniawan, D. S. Khaerudini, G. E. Timuda, N. Darsono, and N. Chollacoop

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

INDEXED IN

 

Publisher Address:
Universitas Mercu Buana
Program Studi S2 Teknik Mesin
Jl. Meruya Selatan No. 1, Jakarta 11650, Indonesia
Phone/Fax. (+6221) 5871335
Email [email protected]
Homepage http://teknikmesin.ft.mercubuana.ac.id/

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.