Rancang Bangun Fall Detector System Untuk Pasien Stroke Dengan Metode Wsn (Wireless Sensor Network)
DOI:
https://doi.org/10.22441/jte.2022.v13i1.006Keywords:
Arduino IDE, Fall Detector, MPU 6050, Node MCU ESP8266, Stroke, Telegram, WSNAbstract
Pasien pasca stroke rentan untuk terjatuh karena kehilangan keseimbangan dalam tubuh. Upaya mengurangi kejadian pasien jatuh banyak rumah sakit telah melakukan pencegahan jatuh seperti, pendidikan pada pasien, pemberian tanda beresiko pada bed pasien dan pelatihan pada para staf merupakan intervensi yang paling efektif untuk mengurangi kejadian pasien jatuh. Oleh karena itu penelitian ini akan membahas pengembangan sistem pendeteksi pasien jatuh dengan sensor MPU 6050 menggunakan komunikasi nirkabel Wi-Fi dan mengirimkan notifikasi melalui aplikasi telegram yang dapat diakses orang terdekat atau anggota keluarganya lebih dari 1 pengguna untuk segera dilakukan penanganan. Penelitian ini bertujuan untuk mengembangkan perangkat pendeteksi jatuh dengan kontroler NodeMCU ESP82666 selanjutkan akan dikirim notifikasi melalui Telegram. Hasil penelitian ini perangkat dapat mendeteksi Pasien pasca Stroke yang rentang jatuh ketika tidur, berjalan dan duduk, muncul notifikasi pada Bot Telegram yang sudah dibuat yang dibuat dapat diakses oleh siapapun sehingga tidak membatasi pengawas atau kerabat dekat pasienDownloads
References
D. Sahpitra, et.al, “Penurunan Resiko Jatuh Pasien Melalui Supervisi Kepala Ruang Perawatan”, Jurnal Kepemimpinan dan Manajemen Keperawatan, vol. 2, no. 2, pp. 45-50, November 2019.
Julimar, “Faktor-Faktor Penyebab Resiko Jatuh Pada Pasien Di Bangsal Neurologi RSUP dr. M Djamil Padang”, Jurnal Photon, vol. 8 no. 2, pp. 133-141, April 2018.
G. Gumilar dkk, “Sistem Pendeteksi Jatuh Wireless Berbasis
Sensor Accelerometer”, TELKA, vol. 4, no.2, pp. 132-141, November
KEMENKES RI. Pedoman Pengendalian Stroke, Jakarta: Arsip KEMENKES RI, 2013.
N. Permatasari, “Perbandingan Stroke Non Hemoragik dengan Gangguan Motorik Pasien Memiliki Faktor Resiko Diabetes Melitus dan Hipertensi”, jiksh, vol. 11 No.1, pp. 298-304, Juni 2020.
S. Norhabibah, et. al, “ Rancang Bangun Sistem Monitoring Deteksi Jatuh untuk Manula dengan Menggunakan Accelerometer”, joincs, vol. 1 No.1, pp. 43-52, November 2016.
A. Jefiza, “Sistem Pendeteksi Jatuh Berbasis Sensor Gyroscope dan Sensor Accelerometer Menggunakan Backpropagation”, Departemen Teknik Elektro. Surabaya: Institut Teknologi Sepuluh Nopember.
T. F. Arya, et.al., “Aplikasi Wireless Sensor Network Untuk Sistem Monitoring dan Klasifikasi Kualitas Udara”. Jurnal Sistem Informasi (Journal of Information System), vol 14, no. 2, 14, pp. 74 – 82, Oktober 2018.
S. D. Tsani, “Sistem Pendeteksi Jatuh Wearable untuk Lanjut Usia Menggunakan Accelerometer dan Gyroscope”, Journal Of Applied Electrical Engineering, vol. 3, no. 2, pp. 44-48, Desember 2019.
M. H. Ibnu Hajar, A. W. Dani, and S. Miharno, “Monitoring Of Electrical System Using Internet Of Things With Smart Current Electric Sensors,” SINERGI, vol. 22, no. 3, p. 211, Oct. 2018, doi: 10.22441/sinergi.2018.3.010.
I. Sucipta, Joni W. Simatupang, C. Kaswandi, and I. Purnama, “Prototipe Pemantauan Tetes Cairan Infus Berbasis IoT Terkoneksi Perangkat Android,” Jurnal Teknologi Elektro, vol. 12, no. 3, pp. 113–119, 2021, doi: 10.22441/jte.2021.v12i3.003.
R. P. Astutik, “Aplikasi Telegram Untuk Sistem Monitoring Pada Smart Farming”, Jurnal Teknologi dan Terapan Bisnis, vol. 2, no. 1, pp. 1-6, Maret 2019.
M. M. Lambacing, et.al., “Rancang Bangun New Normal Covid-19 Masker Detektor Dengan Notifikasi Telegram Berbasis Internet Of Things”, Jurnal Dinamik, vol. 25, no. 2, pp. 77-84, Juli 2020.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
