Rancang Bangun Smart Garden Untuk Budidaya Jamur Tiram Dengan Metode Sistem Fuzzy Mamdani Berbasis Internet Of Things (IoT)
DOI:
https://doi.org/10.22441/jte.2022.v13i2.008Keywords:
Jamur Tiram, Suhu, Kelembapan, Fuzzy Mamdani, Blynk, ESP32Abstract
Jamur tiram pada umumnya dapat tumbuh secara alami dibawah pohon berdaun lebar yang ada dihutan atau dibawah tanaman berkayu yang memiliki suhu lingkungan sekitar 22- 28°C dan kelembaban 70 – 90%. Indonesia adalah negara tropis dengan suhu lingkungan sekitar 27.3°C. Pada penelitian ini dirancang sebuah alat untuk mengontrol dua macam miniatur kumbung untuk diamati pertumbuhan dari keduanya, yaitu kumbung dengan kendali fuzzy mamdani dan kumbung konven tanpa kendali fuzzy. Alat ini berfungsi untuk mengatur dan mengendalikan suhu dan kelembapan pada kumbung jamur tiram agar suhu dan kelembapan sesui dengan habitat jamur tiram sehingga dapat mempermudah pekerjaan petani. Dari hasil pengujian yang telah dilakukan diperoleh hasil yaitu kumbung dengan kendali fuzzy diperoleh hasil pertumbuhan jamur yang lebih baik daripada kumbung tanpa kendali. Dengan penerapan metode fuzzy mamdani alat dapat mengendalikan suhu pada kisaran 25°C sampai 28°C dan kelembaban pada kisaran 87% sampai 90%.
Downloads
References
S. Waluyo, R. E. Wahyono, B. Lanya, and M. Telaumbanua, “Pengendalian Temperatur dan Kelembaban dalam Kumbung Jamur Tiram (Pleurotus sp) Secara Otomatis Berbasis Mikrokontroler,” agriTECH, vol. 38, no. 3, p. 282, 2019, doi: 10.22146/agritech.30068.
A. Najmurrokhman, Kusnandar, U. Komarudin, A. Daelami, and F. Adiputra, “Design and Implementation of Temperature and Humidity Control System in Oyster Mushroom Cultivation using Fuzzy Logic Controller,” 2019 Int. Conf. Comput. Control. Informatics its Appl. Emerg. Trends Big Data Artif. Intell. IC3INA 2019, pp. 146–150, 2019, doi: 10.1109/IC3INA48034.2019.8949573.
J. Dela Cruz-Del Amen and J. Flores Villaverde, “Fuzzy Logic-based Controlled Environment for the Production of Oyster Mushroom,” 2019 IEEE 11th Int. Conf. Humanoid, Nanotechnology, Inf. Technol. Commun. Control. Environ. Manag. HNICEM 2019, 2019, doi: 10.1109/HNICEM48295.2019.9072902.
G. P. Cikarge and F. Arifin, “Oyster Mushrooms Humidity Control Based on Fuzzy Logic by Using Arduino ATMega238 Microcontroller,” J. Phys. Conf. Ser., vol. 1140, no. 1, 2018, doi: 10.1088/1742-6596/1140/1/012002.
T. Kaewwiset and P. Yodkhad, “Automatic temperature and humidity control system by using Fuzzy Logic algorithm for mushroom nursery,” 2nd Jt. Int. Conf. Digit. Arts, Media Technol. 2017 Digit. Econ. Sustain. Growth, ICDAMT 2017, pp. 396–399, 2017, doi: 10.1109/ICDAMT.2017.7905000.
M. Pamungkas and Y. S. Rohmah, “Perancangan dan Realisasi Alat Pengukur Intensitas Cahaya,” vol. 3, no. 2, pp. 120–132, 2015.
A. Saputra, M. H. Ibnu Hajar, and A. R. Bahrain, “Sistem Kontrol Pada Hydroponics Grow Room Dengan Menggunakan Module Esp8266-01,” Jurnal Teknologi Elektro, vol. 10, no. 1, p. 16, Dec. 2019, doi: 10.22441/jte.v10i1.003.
A. W. Dani, A. Mundhola, R. Rahmatullah, and A. Mundhofa, “Perangkat Uji Penciuman sebagai Protokol Kesehatan Menggunakan Fuzzy Mamdani Berbasis Internet Of Things,” Jurnal Teknologi Elektro, vol. 12, no. 3, p. 160, Oct. 2021, doi: 10.22441/jte.2021.v12i3.010.
A. W. Dani, “Optimalisasi Pertumbuhan Pada Sayuran Hidroponik Nutrient Film Technique Dengan Metode Fuzzy Logic Berbasis Internet of Things,” Jurnal Teknologi Elektro, vol. 11, no. 1, p. 1, Feb. 2020, doi: 10.22441/jte.2020.v11i1.001.
R. B. Cahya, T. Pangaribowo, and F. Supegina, “Rancang Bangun Sistem Kontrol Penyiraman Tanaman Anggrek Menggunakan Logika Fuzzy Berbasis Notifikasi Telegram,” Jurnal Teknologi Elektro, vol. 12, no. 2, p. 59, Jul. 2021, doi: 10.22441/jte.2021.v12i2.003.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
