Prototype Alat Pengering Sepatu Menggunakan Sensor DHT 22 Berbasis Internet Of Things (IoT)
DOI:
https://doi.org/10.22441/jte.2022.v13i3.007Kata Kunci:
Temperature, Sensor DHT22, Internet Of ThingsAbstrak
Abstrak— Pengering Sepatu merupakan salah satu alat alternatif di musim penghujan dan di waktu malam hari dikarenakan tidak adanya panas matahari. Pengering sepatu ini jika dipadukan dengan IoT maka akan menjadi suatu alat yang bersinergi dengan kemajuan teknologi saat ini. Penelitian ini ditujukan mengeringkan sepatu dengan mengatur temperatur pada box pengering sepatu. Pengendaliannya dilakukan dengan menyalakan Lampu Pijar dan Kipas DC Menggunakan Smartphone dan Exchaust Fan Otomatis. Dari Hasil Penelitian Tersebut Diperoleh Data set point 710C dengan waktu 65 menit sepatu kering dan nilai rata-rata kenaikan suhu menuju set point adalah 0,61˚C setiap menitnyaUnduhan
Referensi
S. Frans, “Prototype Smart Home Berbasis IOT (Internet of Things),” Usu.ac.id, 2019, doi: http://repositori.usu.ac.id/handle/123456789/22735.
M. F. Ismail and H. Hikmarika, “Perancangan Pengaplikasian Internet Of Things Pada Robot Pemotong Rumput Berbasis Arduino Mega 2560 Dengan ESP8266 - Sriwijaya University Repository,” Unsri.ac.id, Sep. 2018, doi: https://repository.unsri.ac.id/11400/1/RAMA_20201_03041281419096_%200007127801_01_front_ref.pdf.
Y. Murdianingsih and L. Aprianti, “Sistem Monitoring Pengering Sepatu Berbasis Internet Of Things Pada Platform Node-Red,” Jurnal Teknologi dan Komunikasi STMIK Subang, vol. 14, no. 1, Oct. 2021, doi: 10.47561/a.v14i1.204.
R. Wismasary and N. A. Syah, “Rancang Bangun Alat Monitoring Suhu Dan Kelembapan Berbasis Internet Of Things (IOT) Pada Gudang Obat Dinas Kesehatan Jeneponto,” Universitas Muhammadiyah Makassar, 2020
A. B. Rizkianto, “Rancang Bangun Pengering Sepatu Berdasarkan Kelembaban Menggunakan Metode PIP (Proportional Integral Derivative) - Repositori Universitas Dinamika,” Dinamika.ac.id, 2019.
F. Q. Afandi, A. Bachri, and U. Ilmi, “Prototype Kotak Menjaga Kekeringan Dan Kelembaban Sepatu Berbasis Mikrokontroller,” Jurnal EECCIS, vol. 16, no. 1, 2022, Accessed: Oct. 09, 2022.
O. D. Sembada, S. Widodo, K. Suharno, and F. Hilmy, “Analisis Alat Pengering Sepatu Terhadap Laju Pengeringan,” Journal of Mechanical Engineering, vol. 4, no. 1, Mar. 2020, doi: 10.31002/jom.v4i1.3404.
R. Maulanansari and E. Prihastono, “Desain Mesin Pengering Sepatu Semi Otomatis Berdasarkan Prinsip Ergonomi (Studi Kasus Pada Umkm Cleanvast Cuci Sepatu Semarang),” Unisbank.ac.id, 2021.
A. D. I. Tirta, and N. Indrihastuti, “Prototipe Alat Pengering Sepatu Bahan Dasar Kain Menggunakan Sensor Suhu LM35 Studi Kasus: Laboratorium Sistem Kendali SMK Dwija Praja Pekalongan”, Cahaya Bagaskara: Jurnal Ilmiah Teknik Elektronika, vvol. 5, no. 1, 2020.
B. R. Purwanti, T. Herdiasah, R. Imawati, C. W. Hidayat, and A. Kahfi, A, “Rancang Bangun Otomasi Pembersih Dan Pengering Alas Kaki Pengganti Pengesat Manual,” Seminar Nasional Teknik Elektro,Vol. 3, No. 1, pp. 171-177, 2018
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
