Rancang Bangun Alat Pemutar Rotor Engine / Apu (Auxilary Power Unit) Pada Pesawat Berbasis Mikrokontroller Menggunakan Android
DOI:
https://doi.org/10.22441/jte.2020.v11i2.003Abstract
Abstrak— Borescope ialah salah satu metode dalam inspeksi bagian dalam dari pesawat yang biasanya dilakukan oleh 1 orang inspector dan 1 orang asisten sebagai membantu untuk memutar rotor engine pada pesawat. Untuk mengatasi akan keterbatasan jumlah asisten yang dibutuhkan dan biaya yang dikeluarkan oleh perusahaan saat borescope dilakukan diluar daerah maka dibutuhkan suatu sistem kendali agar dapat menggantikan peran dari asisten tersebut. Sistem kendali tersebut mampu menggerakkan beban rotor engine, hal tersebut berupa motor DC dengan torsi besar dan smartphone android sebagai pengontrol. Untuk mengontrol motor DC tersebut membutuhkan mikrokontroller Arduino dan Driver 7960 sebagai pemberi trigger serta Bluetooth HC-05 sebagai perantara smartphone dengan Arduino. Namun sebelum itu harus dibuat secara manual aplikasi untuk smartphone tersebut di appinventor. Hasil dari sistem kendali tersebut mampu menggantikan posisi asisten sehingga boroescope tersebut dapat dilakukan dengan sendiri menggunakan smartphone yang dimiliki. Kemampuan smartphone dalam mengirim data ke Bluetooth tidak lebih dari 100 meter dan kecepatan dari motor DC tersebut saat di input kan bit maksimal yaitu 255 bisa mencapai 82 Rotasi Per Menit dan bisa dikendalikan menggunakan tegangan 15V DC.
Downloads
References
I Putu Agus Santana, Andi Irawa, 2016. Alur Daily Check Pada Pekerjaan Line Maintenance PT. GMFAA Branch Office Bandara Internasional Lombok Praya Terhadap Pesawat Garuda Boeing 737-400 CFM56-3B. Vol 10, No 2.
Sadewo, A., Widasari, E., & Muttaqin, A, 2017. Perancangan Pengendali Rumah Menggunakan Smartphone Android dengan Konektivitas Bluetooth. Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, Vol. 1, No. 5. H 415- 425.
Marti WIdya Sari, Hafid Hardyanto, 2016. Implementasi Monitoring Pengendalian Pintu Gerbang Rumah Menggunakan AppInventor Berbasis Android. Jurnal Eksis Vol 9, No 01. Hal 20-28.
Jeril H. Lontoh , Dringhuzen J. Mamahit, Novi M. Tulung, 2017. Rancang Bangun Kunci Pintu Elektronik Menggunakan Bluetooth Berbasis Android. Jurnal Teknik Elektro dan Komputer. Vol 6, No 3.
Ade Reza Septiadi, Syaiful Amr, 2019. Rancang Bangun Analisa Robot Tematik Simulasi Pertanian Dengan Kendali Wireless. Jurnal Infomedia Teknik Informatika Dan Jaringan. Vol 4, No 1.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
