Optimasi Daya Keluaran Pada Solar Panel Dengan Metode Tracking Berbasis Internet Of Things
DOI:
https://doi.org/10.22441/jte.2021.v12i1.002Keywords:
Dual Axis, Internet Of Things, Lensa Fresnel, Sistem Tracking, MonitoringAbstract
Penggunaan panel surya yang terpasang pada umumnya kebanyakan masih bersifat statis yang menyebabkan penerimaan matahari tidak optimal karena posisi solar panel tidak berada dalam posisi yang tepat terhadap arah datangnya sinar matahari, maka untuk memanfaatkan energi cahaya matahari dengan optimal maka panel surya harus mengikuti arah datangnya sinar matahari, penambahan lensa fresnel pada sistem tracking membantu untuk mendapatkan cahaya yang lebih maksimal, sehingga daya yang dihasilkan akan lebih maksimal. Tujuan dari penelitian ini adalah membuat sebuah sistem yang dapat melakukan tracking terhadap posisi sinar matahari untuk meningkatkan efisiensi penerimaan cahaya oleh panel surya, serta melakukan monitoring dari daya yang dihasilkan oleh panel surya berbasis internet of things. Hasil dari penelitian ini menunjukkan bahwa Peningkatan daya solar panel dengan menggunakan sistem solar tracking terhadap solar panel statis mampu mengoptimalkan daya keluaran panel surya sebesar 27,4%, sedangkan peningkatan daya solar panel dengan menggunakan sistem solar tracking terhadap solar tracking dengan lensa fresnel mampu mengoptimalkan daya keluaran panel surya sebesar 14%.
Downloads
References
Direktorat Jendral Energi Baru Terbarukan dan Konservasi Energi. Statistik Ketenagalistrikan 2016. Jakarta : Kementrian ESDM.
J. Andika, F. D. Atmaja, M. H. I. Hajar, K. S. Salamah and G. Febrilia, "Pocket DC Earth Fault Locator (P-DEL) for Alarm Interference of DC Power Supply using the Internet of Things," 2020 2nd International Conference on Broadband Communications, Wireless Sensors and Powering (BCWSP), Yogyakarta, Indonesia, 2020, pp. 173-177, doi: 10.1109/BCWSP50066.2020.9249459.
A. Adriansyah, S. Budiyanto, J. Andika, A. Romadlan, and N. Nurdin, “Public street lighting control and monitoring system using the internet of things,” in AIP Conference Proceedings, 2020, vol. 2217, doi: 10.1063/5.0000594
A. S. Spanias, “Solar energy management as an Internet of Things (IoT) application”, In 2017 8th International Conference on Information, Intelligence, Systems & Applications (IISA) (pp. 1-4). IEEE, 2017
O. Chieochan, A. Saokaew and E. Boonchieng, “Internet of things (IOT) for smart solar energy: A case study of the smart farm at Maejo University”, In 2017 International Conference on Control, Automation and Information Sciences (ICCAIS) (pp. 262-267), IEEE, 2017.
S. Patil, M. Vijayalashmi, and R. Tapaskar, “Solar energy monitoring system using IOT”, Indian Journal of Scientific Research, 149-156, 2017.
I. M Benny P.W., I. B. A. Swamardika and I. W. A. Wijaya, “Rancang Bangun Sistem Tracking Panel Surya Berbasis Mikrokontroler arduino”, Jurnal Spektrum, Volume 2 (2), 2015.
F. Khalid. Solar Tracking System Berbasis Arduino. S1. Universitas Islam Negri Alauddin Makassar. 2017.
H. Susanto. Desain dan Implementasi Pemantau Tegangan dan Arus Motor DC Menggunakan Konsep IOT. Jurnal Teknik,Elektronik,Enggine, Volume 5 (1), 2018.
R. J. D. Lesmana. Rancang Bangun Solar Cell Tracking System dan Proteksi Lebih Berbasis Mikrokontroler Arduino Jurnal Teknik Elektro, Volume 8 (1), 2019.
B. Adyanto. Pengukuran Tegangan, Arus, dan Daya Listrik Menggunakan Perangkat Telepon Pintar, Jurnal Teknik Elektro, 2019
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
