Analysis productivity of the mine facility department using the objective matrix method (OMAX): case study in coal mining company
DOI:
https://doi.org/10.22441/oe.2023.v15.i3.092Keywords:
productivity, objective matrix, fishbone diagramAbstract
PT Kideco Jaya Agung is one of the coal mining companies in Paser Regency, East Kalimantan, using an open pit mining system which at the end of 2012 succeeded in realizing the production, transportation, shipping target of 34 million tons. Coal mining is carried out using excavating equipment and hauling equipment. Activities begin with land clearing using bulldozers and / or small excavators, blasting overburden and / or removal of overburden, cleaning coal, loading and transporting coal to the ROM Stockpile. Throughout 2021 there has been a decrease in production results, it is necessary to analyze the productivity of the company's performance, which in this case leads to the Mine Facility department because it is directly related to production. The need to analyze productivity measurements so that it can be seen whether the Mine Facility department in this company is productive or not. The productivity measurement method that can be used to solve the problem is Objective Matrix (OMAX), because the OMAX productivity measurement model overcomes the problems of complexity and difficulty of productivity measurement by combining all important productivity criteria into an integrated form and interrelated with each other and easy to combine.Downloads
References
Beatrix, M., & Dewi, A. A. (2019). Analisa Produktivitas Dengan Menggunakan Model Pengukuran the American Productivity Center (Apc) Pada Produk Alumunium Sheet Dan Alumunium Foil. Jurnal PASTI, 13(2), 154. https://doi.org/10.22441/pasti.2019.v13i2.005
Deoranto, P., Harwitasari, A., & Morita Ikasari, D. (2016). Analisis Produktivitas dan Profitabilitas Produksi Sari Apel dengan Metode American Productivity Center di KSU Brosem. Industria: Jurnal Teknologi Dan Manajemen Agroindustri, 5(3), 114–124.
Eviyanti, N. (2021). Analisis Fishbone Diagram Untuk Mengevaluasi Pembuatan Peralatan Aluminium Studi Kasus Pada Sp Aluminium Yogyakarta. JAAKFE UNTAN (Jurnal Audit Dan Akuntansi Fakultas Ekonomi Universitas Tanjungpura), 10(1), 10. https://doi.org/10.26418/jaakfe.v10i1.45233
Faris, M., & Helianty, Y. (2015). Usulan Peningkatan Produktivitas Di Lantai Produksi Menggunakan Metode Objective Matrix (OMAX) (Studi kasus di PT Agronesia Divisi Industri Karet). Jurnal Online Institut Teknologi Nasional Jurusan Tehnik Industri No.04, 03(04), 253–263. https://www.google.com/url?sa=i&rct=j&q=&esrc=s&source=web&cd=&ved=0CAIQw7AJahcKEwj49LbOzPL_AhUAAAAAHQAAAAAQAw&url=https%3A%2F%2Fejurnal.itenas.ac.id%2Findex.php%2Frekaintegra%2Farticle%2Fdownload%2F923%2F1159&psig=AOvVaw1WRCwY31PyGfJ2UxXblpDS&ust=1688475
Fithri, P., & Firdaus, I. (2016). Analisis Produktifitas Menggunakan Metode ObjectiveMatrix (OMAX) (Studi Kasus: PT. Moradon Berlian Sakti). Jurnal Optimasi Sistem Industri, 13(1), 548. https://doi.org/10.25077/josi.v13.n1.p548-555.2014
Mukti, A. R., A’yun, Q., & Suparto, S. (2021). Analisis Produktivitas Menggunakan Metode Objective Matrix (OMAX) (Studi Kasus: Departemen Produksi PT Elang Jagad). Jurnal Teknologi Dan Manajemen, 2(1), 13–18. https://doi.org/10.31284/j.jtm.2021.v2i1.1525
Nasution, A. H. (2006). Manajemen Industri. Andi Yogyakarta.
Ramayanti, G., Sastraguntara, G., & Supriyadi, S. (2020). Analisis Produktivitas dengan Metode Objective Matrix (OMAX) di Lantai Produksi Perusahaan Botol Minuman. Jurnal INTECH Teknik Industri Universitas Serang Raya, 6(1), 31–38. https://doi.org/10.30656/intech.v6i1.2275
Ristanti, D. M. R., Lukmandono, & Prabowo, R. (2018). Analisis Produktivitas Dengan Pendekatan Metode APC Di Perusahaan Jasa Uji Tak Merusak/NDT. Conference on Innovation and Application of Science and Technology (CIASTECH 2018), September, 469–477.
Rizky Prastyo dan Lukmandono. (2019). Jurnal SENOPATI Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering. Senopati, 1 No.1, 11–21.
Saori, S., Anjelia, S., Melati, R., Nuralamsyah, M., Djorghi, E. R. S., & Ulhaq, A. (2021). Analisis Pengendalian Mutu pada Industri Lilin (Studi Kasus pada PD Ikram Nusa Persada Kota Sukabumi). Jurnal Inovasi Penelitian, 1(10), 2133–2138.
Septifani, R., Citraresmi, A. D. P., & Emaradina, G. M. (2022). Application of objective matrix to improve performance green supply chain management. Advances in Food Science, Sustainable Agriculture and Agroindustrial Engineering (AFSSAAE), 5(2), 121-129.
Setiowati, R. (2017). Analisis Pengukuran Produktivitas Departemen Produksi Dengan Metode Objective Matrix (Omax) Pada Cv. Jaya Mandiri. Faktor Exacta, 10(December 2012), 199–209.
Supriyanto, A., Probowati, B. D., & Burhan, B. (2016). Pengukuran Produktivitas Perusahaan Tahu Dengan Metode Objective Matrix (Omax). Agrointek, 9(2), 109. https://doi.org/10.21107/agrointek.v9i2.2141
Wahyuni, H. C. (2017). Analisis Produktivitas. Umsida Press.
Waluyo, M. (2018). Produktivitas Untuk Teknik Industri. Teknik Industri, 73.
Wulandari, R., Ridwan, A. Y., & Muttaqin, S. (2021, October). Halal supply chain performance measurement model in food industry using SCOR model, AHP method and OMAX. In International Conference on Experimental and Computational Mechanics in Engineering (pp. 187-197). Singapore: Springer Nature Singapore.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
