PERANCANGAN ALAT BANTU BERKENDARA SEPEDA MOTOR PENYANDANG TUNARUNGU
DOI:
https://doi.org/10.22441/pasti.2021.v15i3.003Keywords:
alat bantu berkendara, tunarungu, perancangan dan pengembangan produkAbstract
Pengendara sepeda motor tunarungu memiliki keterbatasan dalam merespon suara lakson dan sirine. Penelitian sebelumnya telah mengidentifikasi kebutuhan pengguna alat bantu berkendara sepeda motor bagi tunarungu dengan metode Quality Function Deployment (QFD) untuk mengatasi permasalahan tersebut. Penelitian ini bertujuan untuk merancang alat bantu yang sama ke tahap selanjutnya hingga diperoleh model 3 dimensi alat. Metode perancangan dan pengembangan produk digunakan pada penelitian ini untuk merancang sistem kerja alat hingga diperoleh beberapa alternatif konsep alat yang selanjutnya diseleksi melalui proses penyaringan dan penilaian konsep hingga diperoleh alternatif konsep terbaik. Hasil alternatif konsep terbaik bersama dengan hasil identifikasi kebutuhan pengguna penelitian sebelumnya secara bersama digunakan sebagai dasar pemodelan 3 dimensi alat bantu berkendara sepeda motor bagi tunarungu. Hasil dari penelitian ini adalah model 3 dimensi alat yang spesifik dengan spesifikasi komponen penyusunnya.Downloads
References
Bandara, M., & Balasuriya, D. N. (2017). Design of a road-side threat alert system for deaf pedestrians.
Data, P. (2014). Informasi Kementerian Kesehatan Republik Indonesia. Situasi penyandang disabilitas. Buletin Jendela Data Dan Informasi Kesehatan, 1–18.
Eppinger, S., & Ulrich, K. (2015). Product design and development. McGraw-Hill Higher Education.
Hallahan, D. P., Pullen, P. C., Kauffman, J. M., & Badar, J. (2020). Exceptional learners. In Oxford Research Encyclopedia of Education.
Lee, J., Elzawawy, A., & Rahemi, H. A. (2014). A. Ds: Aid device for deaf drivers. Proceedings of the Welfth LACCEI Latin American and Caribbean Conference for Engineering and Technology (LACCEI’2014)” Excellence in Engineering To Enhance a Country’s Productivity.
Mohammadi, S., & Mesgarha, S. G. (2012). Horn of Car Sensitive Controlled System for Helping Deaf Drivers and Improving Their Driving. Advanced Materials Research, 433, 6751–6754.
Organization, W. H. (2011). World report on disability 2011. World Health Organization.
Otoom, M., Alzubaidi, M. A., & Aloufee, R. (2020). Novel navigation assistive device for deaf drivers. Assistive Technology, 1–11.
Prasetyo, P. E., & Susetyo, A. E. (2020). Analisis kebutuhan pengguna alat bantu berkendara sepeda motor tunarungu dengan metode quality function deployment. Jurnal Taman Vokasi, 8, 1.
Pugh, S. (1990). Total Design, Addision Wesley Pub. Co. Harlow, England.
WHO. (2021). Deafness and hearing loss. Www.Who.Int. https://www.who.int/news-room/fact-sheets/detail/deafness-and-hearing-loss.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
