IMPLEMENTASI METODE RASIONAL GUNA MERANCANG ALAT PENGERING SABLON OTOMATIS
DOI:
https://doi.org/10.22441/pasti.2022.v16i2.007Keywords:
alat pengering sablon, metode rasional, sablonAbstract
Pada UMKM proses produksi menjadi elemen penting yang harus diperhatikan. Dalam proses produksinya masih menggunakan alat manual. UD. Riski Agung merupakan usaha yang bergerak di bidang konveksi. Setiap harinya UD. Riski Agung dalam proses pengeringan hasil sablon masih menggunakan alat yang manual yaitu hair dryer. Penggunaan hair dryer dalam proses pengeringan sablon membutuhkan waktu yang lama dan dapat menimbulkan kecelakaan kerja. Maka diperlukan perancangan alat pengering sablon otomatis yang tentunya akan mempercepat waktu pengeringan. Dalam merancang alat pengering sablon otomatis menggunakan metode rasional. langkah-langkah metoderasional adalah mengklarifikasi tujuan, menerapkan fungsi, menerapkan persyaratan, menentukan karakteristik, memperbaiki detail. Dalam penelitian ini bahwa rancangan alat pengering sablon otomatis dapat menjadi solusi dari permasalahan yang ada dan dapat membantu mengeringkan hasil sablon dengan cepat dan sempurna.
Downloads
References
Anwar, M.K., Jazuli, R Setyaningrum.(2017). “Perancangan Alat Pemotong Kue Yangko dengan Metode Rasional”. Applied Industrial Engineering Journal. Vol.1, No.1, hal 1-14.
Cahyani, A.W., A Kusnayat, M Rahayu. (2020). “Perancangan Body Catalytic Converter Untuk Mesin Diesel Menggunakan Metode Perancangan Produk Rasional Agar Dapat Dilakukan Proses Penggantian Filter (Studi Kasus CV. XYZ)”. E-Proceeding of Engineering. Vol. 7, No. 2, hal 5737-5744.
Deni, R.R.D.R., S Martini, M Iqbal. (2021). “Perancangan Alat Pengiris Tempe Pada UMKM CC Dengan Metode Perancangan Produk Rasional”. e-Proceeding of Engineering. Vol. 8, No. 1, hal 559-566.
Frans, JR. (2018). “Analisis Perancangan Produk Alat Pencetak Spasi Semen Batu Bata Untuk Meningkatkan Produkstivitas”. Jurnal Dinamika Teknik. Vol.12, No. 2, hal 101-110.
Ginting, R., T Y Batubara, Widodo. (2017). “Desain Ulang Produk Tempat Tissue Multifungsi Dengan Menggunakan Metode Quality Function Deployment”. Jurnal Teknik Sipil. Vol. 1, No. 1 hal 39-44.
Ibrahim, M., R B Jakaria. (2020). “Pengembangan Desain Produk Ibadah Dalam Memenuhi Kebutuhan Muslim Di Asia Temggara”. Journal of Islamic Elemetary School. Vol.4, Hal 51-67.
Imaduddin, M H., M Rahayu, I Mufidah. (2021). “Perancangan Conveyor Mesin Crusher Menggunakan Metode Perancangan Produk Rasional Di PT. XYZ”. E-Peoceeding Of Engineering. Vol. 8, No. 5, hal 7366-7370.
Jakaria, R B, Tedjo Sukmono. (2021). “Perencanaan dan Perancangan Produk”. Sidoarjo: UMSIDA Press.
Kurnianingtyas, C.D., T Heryawan. (2018). “Rancangan Alat Potong Kulit Bahan Baku Tas Dengan Metode Rasional”. Jurnal Ilmiah Teknik Industri. Vol. 17, No. 2, hal 99-107.
Lahabu O., Y E Prawatna, Ivan Sujana. (2022). “Rancang Bangun Alat Pengering Tinta Sablon Dengan Menggunakan Metode Quality Function Deployment (QFD) Dan Desain Eksperimen”. Industrial Engineering and Management System. Vol. 6, No. 1, hal 106-120.
Nurlita, S., A Kusnayat, I Mufidah. (2019). “Perancangan Alat Bantu Untuk Meningkatkan Kinerja Mesin Dust Collector Menggunakan Metode Perancangan Produk Rasional (Studi Kasus CV. XYZ)”. E-Proceeding of Engineering. Vol. 6, No. 2, hal 6585-6591.
Purbaya, R.W., R Setyaningrum, T Talitha. (2021). “Perancangan Meja Pengemasan Makanan Ringan dengan Metode Rasional untuk Mengurangi Waktu Siklus dan Meminimalisir Resiko Cedera Pada Proses Produksi Di UKM Berjah Polaman”. Jurnal Teknik Industri. Vol. 11, No. 2, hal 117-124.
Rakhmawati, A., M A Putri, B W Setyanto. (2021). “Pelatihan Cipta Kreasi dan Proses Sablon Bagi Karang Taruna Desa Tegal Harjo, Kecamatan Eromoko Kabupaten Wonogiri”. Jurnal Pengapdian Masyarakat. Vol. 3, No. 27, hal. 120-125.
Ulum, M., R Setyaningrum, T Talitha. (2020). “Redesain Alat Pemotong Singkong Menggunakan Metode Rasional Guna Meningkatkan Produktivitas”. Jurnal Sistem Teknik Industri. Vol. 22, No. 1, hal 52-62.
Yahya, D N., H Lalu, M Y Lubis. (2020). “Perancangan Usulan Alat Bantu Pelindung Untuk Mengurangi Resiko K3 Pada Mesin Uji Shearing Laboratorium Otomotif Balai Besar Bahan Dan Barang Teknik (B4T) Bandung Menggunakan Pendekatan Perancangan Produk Rasional”. E-Proceeding Of Engineering. Vol. 7, No.3, hal 9590-9598.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
