Usability Testing Vision Sensor Based Work Time Measurement Technology
DOI:
https://doi.org/10.22441/pasti.2020.v14i2.001Keywords:
Cycle time, Vision sensor technology, Usability testing.Abstract
A product or technology is perceived easily in case it has a high level of usability. This means users have no difficulties or encounter problems while using. The purpose of this study is to conduct usability testing of vision sensor-based working time measurement technology. It is meant to determine the ability of the technology to conduct work time measurement functions with the same results as the conventional process using a stopwatch. The study involves an experimental method with two factors. Based on the results of the ANOVA Two-Way Analysis (within-subject design), the first and second levels in apparatus factor shows there is no difference in the average value of the cycle time between work measurements with and without the vision sensor technology (Fobtained(4,1) < Fcritical(5,12)). Therefore, the technology designed is capable of measuring the same work as manual measurement.
Downloads
References
Ani, N. U. R., Noprisson, H., & Ali, N. M. (2019). Measuring Usability
and purchase Intention for Online Travel Booking : A Case Study.
International Review of Applied Sciences and Engineering, 10(2),
–171. https://doi.org/10.1556/1848.2019.0020
Chan, A. P., Yang, Y., & Song, W. (2017). Evaluating the usability of
a commercial cooling vest in the Hong Kong industries Title page.
International Journal of Occupational Safety and Ergnomics, 0(0),
–21. https://doi.org/10.1080/10803548.2017.1282237
Hertzum, M. (2016). Usability Testing : Too Early ? Too Much
Talking ? Too Many Problems ? Journal of Usability Studies, 11(3),
–88.
Holt, R., Lane, W., & Street, C. (2013). A System in the Wild :
Deploying a Two Player Arm Rehabilitation System for Children With
Cerebral Palsy in a School Environment. Journal of Usability Studies,
(4), 111–126.
Swatriani, R. (2018). Analisis Hubungan System Usability Scale
dengan Deskiling Pengguna. NARADA, Jurnal Desain & Seni, FDSK-
UMB, 5(1), 80–92.
Yogasara, T., & Muliawan, S. (2006). Analisis Ergonomi dan Usulan
Perancangan Fasilitas Permainan Untuk Anak-anak ( Studi Kasus di
Taman Kanak-kanak Paulus , Bandung ). In Prosiding Seminar
Nasional Ergonomi dan K3 (pp. 1–10).
Yuliani, E. N. S., Setianingrum, A. Y., Kholil, M., & Wardoyo, A. S.
(2019). Development of Direct Time Study Technology for Advanced
Work Measurement. In the 4th International Conference on
Technology, Informatics, Management, Engineering and
Environment (p. 104).
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under CC BY-SA
A Creative Commons Attribution-ShareAlike (CC BY-SA) license allows you to use, share, and build upon a creator's work for any purpose—including commercial use—as long as you follow specific rules.
