Menurunkan Reject Bocor Outer Tube Model 54P Non Gatting di Line Casting dengan Menggunakan Metode Eight Steps di Perusahaan Shock Absorber
DOI:
https://doi.org/10.22441/pasti.2024.v18i3.002Kata Kunci:
Casting, Coating, Dies, Eight, Steps, RejectAbstrak
Perusahaan Shock Absorber adalah pabrik Shock Absorber terbesar di Indonesia yang memproduksi shock absorber menggunakan mesin berkualitas tinggi yang memenuhi standart kualitas Original Equipment Manufacturer yang bergerak di bidang otomotif. Produk dari Perusahaan Shock Absorber salah satu nya adalah Outer tube. Outer tube adalah salah satu part pada shock absorber jenis front fork. Perusahaan Shock Absorber dituntut untuk mempertahankan kualitasnya dengan menekan jumlah reject proses produksinya. Salah satu reject tertinggi yang ada di line casting adalah bocor, dengan model tertinggi yaitu model 54P non Gatting yaitu sebanyak 10.710 pcs selama 3 bulan. Reject bocor model 54P non Gatting pada 3 bulan yaitu oktober 14,2%, November 14,9%, Desember 13,2%. Upaya menurunkan angka reject ini metode yang digunakan yaitu 8 steps 7 tools. Tujuan dari penelitian ini yaitu mencari penyebab reject bocor model 54P non gatting di line casting dan mengatasi bocor untuk model 54p non gatting. Setelah dilakukan analisis dan improvement perbaikan yang dilakukan adalah mengganti jenis coating pada dies, merubah ketebalan coating dies dan mengganti material spot cooling di area disc brake. Setelah dilakukan improvement tersebut, hasil reject bocor pada model 54p non gatting turun dari 14.2% menjadi 1,1%.
Unduhan
Referensi
Abdullah, H., & Nishida, T. (2019). Perbaikan Kualitas Produk Pada Industri Pembuat Komponen Logam Dengan Penerapan Metode Qcc. Metal Indonesia, 41(1), 1. https://doi.org/10.32423/jmi.2019.v41.1-8
Afwan butani, winarni, muhammad yusuf. (2019). ISSN : 2338-7750 Institut Sains & Teknologi AKPRIND Yogyakarta Jurnal REKAVASI ISSN : Jurnal Rekavasi, 7(1), 7–15.
Alfiane, R. T. (2024). Mengurangi Cacat Produk Dengan Implementasi PDCA ( Studi Kasus Perusahaan Pt Xyz ). 2(1).
Campbell, J. (2015). Complete Casting Handbook. In Complete Casting Handbook. https://doi.org/10.1016/c2014-0-01548-1
Khamaludin, & Respati, A. P. (2019). Implementasi Metode QCC untuk Menurunkan Jumlah Sisa Sampel Pengujian Compound. Jurnal Optimasi Sistem Industri, 18(2), 176–185.
https://doi.org/10.25077/josi.v18.n2.p176-185.2019
Komang Dartawan, I., & Setiafindari, W. (2023). Pengendalian Kualitas Menggunakan Metode Seven Tools Dan Kaizen Produk Polypropylene Pada PT KMPI. Jtmei), 2(2), 209–221.
Luluk Suryani, Daniel O. Siahaan, dan I. S. (2015). Analisis Dan Peningkatan Kualitas Sistem Informasi Dengan Menggunakan Metode Seven Tools Dan Quality Function Deployment (QFD). Prosiding Seminar Nasional Manajemen Teknologi XXIII, 1–8. http://repository.its.ac.id/id/eprint/75382
Nensi Yuselin; Edwar Rosyidi; Hasanuddin Pardomuan Lubis. (2022). Politeknik astra. 13(2), 81–87.
Nugrowibowo, I. S. N. M. (2023). Pengendalian Kualitas Produk Aluminium Alloy Wheel Dengan Metode Seven Tools dan PDCA. Jurnal Informasi, Sains Dan Teknologi, 6(1), 104–119. https://doi.org/10.55606/isaintek.v6i1.86
Permana, N., & Pujani, V. (2019). Penerapan Lean Manufacturing Untuk Mengurangi Waste Pada Proses Produksi (Tiang Post) Produk Guardrail Di Pt. Xxx. Jurnal Ilmu Manajemen Dan Akuntansi Terapan (JIMAT), 10(1), 81–99.
Prassetiyo, H., Rispianda, R., & Adanda, H. (2016). Rancangan Jig Dan Fixture Pembuatan Produk Cover on-Off. Teknoin, 22(5), 350–360. https://doi.org/10.20885/teknoin.vol22.iss5.art4
Rasyida, D. R. ., & Ulkhaq, M. M. (2015). Aplikasi Metode Seven Tools Dan Analisis 5W + 1H Untuk. Industrial Engineering Department, Faculty of Engineering, Diponegoro University, 5(4), 1–9.
Rijanto, O. A. W. (2014). Analisis Pengendalian Mutu Proses Machining Alloy Wheel Menggunakan Metode Six Sigma. Jurnal Ilmiah Teknik Industri, 13(2), 177–186.
Rundman, K. B. (2000). Metal Casting (Reference Book for MY4130). 1–154.
Suripatty, I. P., Dharsono, W. W., & Suryadi. (2019). Mengurangi Down Time Mesin. Filling Pada Produksi Minuman Botol Dengan Menggunakan Metode Quality Control Circle Di PT XYZ. Jurnal FATEKSA: Jurnal Teknologi Dan Rekayasa, 4(1), 19–26.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
