PERANCANGAN LEMARI PENYIMPANAN ERGONOMIS SEBAGAI PENERAPAN METODE 5S PADA DIVISI PEMBUBUTAN DI CV.TJOKRO BERSAUDARA CABANG TANGERANG
DOI:
https://doi.org/10.22441/pasti.2019.v13i3.002Kata Kunci:
lemari penyimpanan, ergonomis, rapi, terorganisir, metode 5S.Abstrak
CV Tjokro Bersaudara merupakan perusahaan yang bergerak dalam bidang produksi alat-alat industri berbahan logam dan non logam yang memiliki banyak cabang, salah satunya adalah cabang Tangerang. Pada cabang Tangerang ini, kualitas lingkungan kerja kurang mendapatkan perhatian.. Setiap peralatan dan komponen yang ada di lemari penyimpanan mesin bubut dibiarkan bercampur sehingga menyulitkan pekerja dalam mencari peralatan dan komponen yang diinginkannya. Selain itu, pekerja juga terpaksa mencari peralatan dan komponen tersebut dalam kondisi membungkuk atau jongkok sehingga sangat buruk dari segi ergonomi. Untuk itulah dilakukan penelitian untuk merancang lemari penyimpanan yang ergonomis untuk meletakkan setiap peralatan dan komponen sebagai bagian dari penerapan 5S. Dilakukan pendataan terhadap peralatan dan komponen yang dipakai untuk mesin bubut serta mengukur dimensi masing-masing alat dan komponen. Dilakukan juga perhitungan ukuran lemari penyimpanan dengan menggunakan data antropometri masyarakat Indonesia berjenis kelamin laki-laki dengan persentil 50 persen untuk ukuran tinggi siku dan persentil 5 persen untuk ukuran panjang genggaman tangan ke depan, dan ukuran tinggi bahu. Panjang lemari penyimpanan yang dirancang akan berukuran 128 cm, lebar lemari penyimpanan bagian horizontal berukuran 65 cm, lebar lemari penyimpanan bagian vertikal berukuran 25 cm, dan ketinggian lemari penyimpanan adalah 100 cm dari lantai. Dirancang lemari penyimpanan dengan ukuran tersebut yang dapat memberikan tempat untuk setiap peralatan dan komponen yang ada sehingga tidak bercampur satu sama lain sesuai prinsip metode 5S.
Unduhan
Referensi
Chengalur, Somadepti N et al. 2004. Kodak’s Ergonomic Design For People at Work 2nd edition. New Jersey : John Wiley and Sons Inc.
HungLin,Chi.“5S Implementation in Wang Cheng Industry Manufacturing Factory in Taiwan.” A Research Paper Submitted in Partial Fullfillement of the Requirements for the Master of Science Degree in Technology Management., University of Wisconsin-Stout, 1985.
Imai, Maasaki. 1992. Kaizen (Kunci Sukses Jepang Dalam Persaingan) ed. 2. Jakarta: PT Pustaka Binaman Pressindo.
Nurminato, Eko. 2003. Ergonomi Konsep Dasar dan Aplikasinya. Surabaya : Guna Widya
Nurmianto, Eko. 1991. Ergonomi Konsep Dasar dan Aplikasinya. Surabaya : Prima Printing
Tjokro Group. 2018. Profil dan Sejarah Perusahaan. https://tjokrogroup.com/history.html (accesed 16 Juni ,2019).
Wignjosoebroto, Sritomo. 2003. Pengantar Teknik dan Manajemen Industri. Surabaya: Guna Widya.
Wignjosoebroto, Sritomo. 2008. Ergonomi, Studi Gerak dan Waktu. Jakarta : Guna Widya
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
