Kaizen Implementation in the Motorcycle Tire Testing Stage with the PDCA Cycle
DOI:
https://doi.org/10.22441/ijiem.v5i1.22296Keywords:
Kaizen, Motorcycle tire, Defect, Improvement, PDCAAbstract
The research was conducted at the tire trial stage at a motorcycle tire production company, which aims to reduce defects in the measurement results at the tire sample trial stage. The company policy stipulates that tire trials are carried out on 10 tire samples taken at random from each of the total production of 250 motorcycle tires. From the samples taken, it was found that the types of tire defects were Cut Sample and Crown Sample as well as tire dimension defects that did not match the target with dimensional defect types namely Pattern Bare and Bead Crack with a total of 60% defects. The method used for improvement with Kaizen through the PDCA cycle, shows several improvement steps based on Fishbone Diagram and 5W1H analysis. The result of this research is the reduction of defects to zero defects (0%), which means that the company's quality objectives can be achieved. With the principle of Kaizen through this PDCA cycle, the company gets very satisfying results, in line with its target of zero defects.Downloads
References
Asti Musman. (2019). TKaizen For Life Kunci Sukses Continuous Improvement di Era 4.0. Anak Hebat Indonesia.
Darmawan, H., Hasibuan, S., & Purba, H., H. (2018). Application of Kaizen Concept with 8 Steps PDCA to Reduce in Line Defect at Pasting Process: A Case Study in Automotive Battery. International Journal of Advances in Scientific Research and Engineering, 4(8), 97–107. https://doi.org/10.31695/ijasre.2018.32800
Erviyana, E., Yuliarty, P., & Wijayanti, A. I. (2022). Dmaic Dalam Menurunkan Scratch Komponen Produk Meter Cluster. Jurnal PASTI (Penelitian Dan Aplikasi Sistem Dan Teknik Industri), 16(3), 300. https://doi.org/10.22441/pasti.2022.v16i3.005
Isniah, S., Hardi Purba, H., & Debora, F. (2020). Plan do check action (PDCA) method: literature review and research issues. Jurnal Sistem Dan Manajemen Industri, 4(1), 72–81. https://doi.org/10.30656/jsmi.v4i1.2186
Kartika, H. (2020). Penerapan Lean Kaizen untuk Meningkatkan Produktivitas Line Painting pada Bagian Produksi Automotive dengan Metode PDCA. Jurnal Sistem Teknik Industri, 22(1), 22–32. https://doi.org/10.32734/jsti.v22i1.3251
Kholil, M. (2023). Implementation of Lean Manufacturing to Reduce Hold Types of Mission Case Products using DMAIC and KAIZEN Approach. The International Journal of Scientific and Academic Research, 03(02), 34–43. https://doi.org/10.54756/ijsar.2023.v3.2.4
Maukar, A. L., Runtuk, J. K., & Kamali, M. U. H. (2021). Perbaikan Cacat Udara Terperangkap Di Area Telapak Ban ( Blister Under Tread ) Pada Mesin Tire Building. Baut Dan Manufaktur, 03(1), 15–18. https://doi.org/https://doi.org/10.34005/bautdanmanufaktur.v3i01.1314
Shinta, N. (2022). Kaizen (1st ed.). CV.Solusi Distribusi Buku.
Smalley, I. K. & A. (2012). Toyota Kaizen Methods : 6 Langkah Perbaikan. Gradient Mediatama. https://doi.org/https://doi.org/10.1201/b11902-6
Sumasto, F., Maharani, C. P., Purwojatmiko, B. H., Imansuri, F., & Aisyah, S. (2023). PDCA Method Implementation to Reduce the Potential Product Defects in the Automotive Components Industry. IJIEM - Indonesian Journal of Industrial Engineering and Management, 4(2), 87–98. https://doi.org/10.22441/ijiem.v4i2.19527
Sunadi, S., Purba, H. H., & Hasibuan, S. (2020). Implementation of statistical process control through pdca cycle to improve potential capability index of drop impact resistance: A case study at aluminum beverage and beer cans manufacturing industry in indonesia. Quality Innovation Prosperity, 24(1), 104–127. https://doi.org/10.12776/QIP.V24I1.1401
Sutrisno, B., Rimawan, E., & Sitorus, T. M. (2022). A Systematic Review of Kaizen Approach in Industries. IJIEM - Indonesian Journal of Industrial Engineering and Management, 3(2), 103. https://doi.org/10.22441/ijiem.v3i2.14131
T. Marcin, R.Isabela, M. D. (2023). applied sciences Revolutionizing Tire Quality Control : AI ’ s Impact on Research ,. 13(14), 2–13. https://doi.org/https://doi.org/10.3390/app13148406
Taufik, D. A. (2020). PDCA Cycle Method implementation in Industries: A Systematic Literature Review. IJIEM - Indonesian Journal of Industrial Engineering and Management, 1(3), 157. https://doi.org/10.22441/ijiem.v1i3.10244
Tri, D., Rakhmanita, A., & Anggraini, A. (2019). Implementasi Kaizen Dalam Meningkatkan Kinerja Pada Perusahaan Manufaktur Di Tangerang. Jurnal Ecodemica: Jurnal Ekonomi, Manajemen, Dan Bisnis, 3(2), 198–206. https://doi.org/10.31311/jeco.v3i2.6077
Ufriandi, A. (2021). Analisis Tingkat Keausan Terhadap Pemakaian Ban Merek a, B Dan C Menggunakan Ban Standar 90/90-14 46 P. Jurnal Surya Teknika, 8(1), 282–288. https://doi.org/10.37859/jst.v8i1.2678
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
