PROPERTIES AND MORPHOLOGICAL OF MORTAR CONTAINING USED ENGINE OIL
Abstract
Keywords
Full Text:
PDFReferences
Briffa, J. Sinagra, E. & Blundell, R. Heavy metal pollution in the environment and their toxicological effects on humans. Heliyon 2020; 6(9);e04691.
S A Ratiu et al . IOP Conf. Ser.: Mater. Sci. Eng. 2022;1220;012034
Carolina T. Pinheiro, Margarida J. Quina & Licínio M. Gando-Ferreira. Management of waste lubricant oil in Europe: A circular economy approach, Critical Reviews in Environmental Science and Technology, 2021;51:18, 2015-2050.
Osman, D.I. Attia, S.K. & Taman, A.R. Recycling of used engine oil by different solvent. Egyptian Journal of Petroleum. 2018; 27(2); 221-225.
Sánchez-Alvarracín, C. Criollo-Bravo, J. Albuja-Arias, D. García-Ávila, F. & Pelaez-Samaniego, MR. Characterization of Used Lubricant Oil in a Latin-American Medium-Size City and Analysis of Options for Its Regeneration. Recycling. 2021; 6(1):10
Nowak P, Kucharska K, Kamiński M. Ecological and Health Effects of Lubricant Oils Emitted into the Environment. Int J Environ Res Public Health. 2019;16(16):3002.
Ali, H. Khan, E. & Ilahi, I. Environmental Chemistry and Ecotoxicology of Hazardous Heavy Metals: Environmental Persistence, Toxicity, and Bioaccumulation. Journal of Chemistry. 2019.
Boadu et al. A Review of Methods for Removal of Contaminants in Used Lubricating Oil. CSIJ 2019. 26(4);1-11
Adewole, B.Z. Olojede, J.O. Owolabi, H.A. & Obisesan, O.R. Characterization and Suitability of Reclaimed Automotive Lubricating Oils Reprocessed by Solvent Extraction Technology. Recycling. 2019; 4(3):31
Ugwele, F.O. Aninwede, C.S. Chime, T.O. Christian, O.A. Innocent, S.I. Application of response surface methodology in optimizing the process conditions for the regeneration of used mobil oil using different kinds of acids. Heliyon. 2020;6(10):e05062.
ASTM C191, Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle, ASTM International. 2021.
ASTM C109, Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle, ASTM International. 2021.
Huang, H. Yuan, Q. Deng, D. Peng, J. & Huang Y. Effects of chemical and mineral admixtures on the foam indexes of cement-based materials. Case Studies in Construction Materials 2019;11;e00232.
García-Vera, V.E. Tenza-Abril, A.J. Saval, J.M. Lanzón, M. Influence of Crystalline Admixtures on the Short-Term Behaviour of Mortars Exposed to Sulphuric Acid. Materials. 2019; 12(1):82
Barbhuiya, S. & Kumala, D. Behaviour of a Sustainable Concrete in Acidic Environment. Sustainability. 2017; 9(9):1556.
Rahman, T. Djamal, M. Nurdiana, J. & Ghulam, A.M. The Effect of Plastocrete® RT6 Plus and Coca-Cola Admixtures on The Concrete Setting Time and Strength. Preprints 2020, 2020010094
K. Poongodi et al. IOP Conf. Ser.: Mater. Sci. Eng 2019. 561 012067
Kunther, W. Ferreiro, S. & Skibsted. Influence of the Ca/Si ratio on the compressive strength of cementitious calcium–silicate–hydrate binders. J. J. Mater. Chem. A, 2017,5, 17401-17412.
Wang, S. Peng, X. Tang, L. Cao, C. Zeng, L. Contact-Hardening Behavior of Calcium Silicate Hydrate Powders. Materials (Basel). 2018;11(12):2367. Published 2018 Nov 25. doi:10.3390/ma11122367
Shaohong Zhu et al. Preparation of nano-calcium silicate hydrate and its application in concrete. IOP Conf. Ser.: Mater. Sci. Eng 2019. 631 022052
DOI: http://dx.doi.org/10.22441/ijimeam.v4i1.15132
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 Andrie Harmaji, Andikah Willy Ramadhan
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
INDEXED IN
Publisher Address:
Universitas Mercu Buana
Program Studi S2 Teknik Mesin
Jl. Meruya Selatan No. 1, Jakarta 11650, Indonesia
Phone/Fax. (+6221) 5871335
Email [email protected]
Homepage http://teknikmesin.ft.mercubuana.ac.id/
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.