Heat Distribution Simulation in a Square Aluminum 7075 Plate Using Laplace Equation and MATLAB

Sri Pudjiwati, Andi Firdaus Sudarma, Kontan Tarigan, Deni Shidqi Khaerudini, Eldwin Djajadiwinata

Abstract


The efficient management of heat transfer from aircraft engines to the wings is vital for maintaining thermal efficiency and structural integrity in modern aircraft design. Excessive heating of the wings, caused by engine-generated heat, can negatively impact aerodynamic performance and safety. This study focuses on analyzing heat distribution in a square aluminum 7075 plate to better understand heat transfer mechanisms. Using the Laplace equation, implemented through MATLAB (2023 Online Version), we aim to simulate and analyze heat distribution on the plate. The numerical method employed in this research involves solving the Laplace equation with Neumann boundary conditions, which represent insulated edges. The Liebmann method is used to iteratively reduce error to less than 1%. Simulations are conducted on an aluminum 7075 plate of dimensions 4x10⁻² m x 4x10⁻² m under various temperature conditions at the edges. Numerical results show that at the 9th iteration, the error reaches 0.71%, while MATLAB simulations yield an error of 0.4681% at the same iteration. The heat distribution across the plate is clearly visualized, and the analysis indicates that increasing the number of grids improves both the clarity and accuracy of the simulation results. In conclusion, this study demonstrates that applying the Laplace equation via MATLAB is an effective approach for analyzing heat distribution in aluminum 7075 plates. The results show that a finer grid resolution enhances accuracy, with a 101-grid system providing particularly clear and precise heat distribution patterns. These findings contribute to the optimization of thermal system designs, especially in aviation-related applications.

Keywords


partial differential equation; Laplace equation; heat distribu-tion; MATLAB; Liebmann method

Full Text:

PDF PDF_SD

References


J. M. Guerrero, A. Sasikumar, J. Llobet, and J. Costa, “Testing and simulation of a composite-aluminium wingbox subcomponent subjected to thermal loading,” Compos. Struct., vol. 296, p. 115887, 2022, doi: 10.1016/j.compstruct.2022.115887.

B. Zhou, B. Liu, and S. Zhang, “The advancement of 7xxx series aluminum alloys for aircraft structures: A review,” Metals (Basel)., vol. 11, no. 5, 2021, doi: 10.3390/met11050718.

R. Samatowa, L., Kurniasari, S., Yunus, and M. Damopolii, “Penentuan distribusi suhu pada pelat logam dengan cara menyelesaikan persa-maan diferensial eliptik menggunakan Microsoft Excel,” JPF (Jurnal Pendidik. Fis. Univ. Islam Negeri Alauddin Makassar), vol. 11, no. 1, p. 163, 2023.

A. Noor and I. Fitrian, “Simulasi sebaran temperatur pelat logam tipis besi dan kuningan berbasis Matlab,” Navig. Phys. J. Phys. Educ., vol. 2, no. 1, pp. 9–13, 2020.

Y. Han and H. Dong, “Boundary Element Method for 3D Laplace and Stokes Flow Problems with Analytical Technique,” J. Phys. Conf. Ser., vol. 2650, no. 1, pp. 0–11, 2023, doi: 10.1088/1742-6596/2650/1/012030.

K. Rachmawati and Vimala, “Simulasi perpindahan panas pada lapisan tengah pelat menggunakan metode elemen hingga,” J. Sains dan Seni ITS, vol. 4, no. 2, pp. A13–A18, 2015, [Online]. Available: https://ejurnal.its.ac.id/index.php/sains_seni/article/view/10852%0Ahttps://ejurnal.its.ac.id

S. C. Chapra and R. P. Canale, Numerical methods for engineers, 7th edition. New York: McGraw-Hill Education, 2015.

E. B. D. M. Alves and J. R. Barbosa, “Laplace transform-based modeling of heat transfer in producing wellbores,” J. Brazilian Soc. Mech. Sci. Eng., vol. 45, no. 12, 2023, doi: 10.1007/s40430-023-04551-w.

M. Kerr, G., González-Parra, and G. Sherman, “A new method based on the Laplace transform and Fourier series for solving linear neutral delay differential equations,” Appl. Math. Comput. 420, 126914., 2022, doi: https://doi.org/10.1016/j.amc.2021.126914.

B. Sudia, L. K. Mangalla, S. Samhuddin, and W. O. Zulkaidah, “Analisis Perpindahan Panas Pada Kolektor Plat Datar Sebagai Sumber Energi Termal Pada Pengering Tipe Rak,” Din. J. Ilm. Tek. Mesin, vol. 10, no. 2, pp. 47–52, 2019, doi: 10.5281/zenodo.3036968.

M. Fatwa, R. Rizki, P. Sriwinarty, and E. Supriyadi, “Pengaplikasian Matlab pada perhitungan matriks,” Papanda J. Math. Sci. Res., vol. 1, no. 2, pp. 81–93, 2022, doi: 10.56916/pjmsr.v1i2.260.

M. P. Coleman, An introduction to partial differential equations with MATLAB®, Second edition. CRC Press, 2016.

E. Georgantzia, M. Gkantou, and G. S. Kamaris, “Aluminium alloys as structural material: A review of research,” Eng. Struct., vol. 227, p. 111372, 2021, doi: 10.1016/j.engstruct.2020.111372.

R. Padmanaban, V. Ratna Kishore, and V. Balusamy, “Numerical simulation of temperature distribution and material flow during friction stir welding of dissimilar aluminum alloys,” Procedia Eng., vol. 97, pp. 854–863, 2014, doi: 10.1016/j.proeng.2014.12.360.

P. H. Shah and V. Badheka, “An experimental investigation of temperature distribution and joint properties of Al 7075 T651 friction stir welded aluminium alloys,” Procedia Technol., vol. 23, pp. 543–550, 2016, doi: 10.1016/j.protcy.2016.03.061.

S. A. Tsirkas, “Numerical simulation of the laser welding process for the prediction of temperature distribution on welded aluminium aircraft components,” Opt. Laser Technol., vol. 100, pp. 45–56, 2018, doi: 10.1016/j.optlastec.2017.09.046.




DOI: http://dx.doi.org/10.22441/ijimeam.v6i2.25356

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Sri Pudjiwati, Andi Firdaus Sudarma, Kontan Tarigan, Deni Shidqi Khaerudini, Eldwin Djajadiwinata

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

INDEXED IN

 

Publisher Address:
Universitas Mercu Buana
Program Studi S2 Teknik Mesin
Jl. Meruya Selatan No. 1, Jakarta 11650, Indonesia
Phone/Fax. (+6221) 5871335
Email [email protected]
Homepage http://teknikmesin.ft.mercubuana.ac.id/

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.