Prototype Pretreatment Proses Pengecatan Part Motor Menggunakan Metode Logika Fuzzy Berbasis Internet Of Thing (IoT)
DOI:
https://doi.org/10.22441/jte.2023.v14i1.006Keywords:
Level, logika fuzzy, Pengecatan, Pretreatment, SuhuAbstract
Abstrak— Proses pengecatan part motor memiliki beberapa tahapan. Salah satu proses dalam pengecatan adalah pretreatment. Proses ini adalah proses pembersihan part motor menggunakan air yang di campur dengan bahan kimia, berfungsi untuk membersihkan part yang akan dicat dari kotoran yang menempel pada part Pada saat penyemprotan part proses penyemprotannya dilakukan terus menerus tanpa adanya penghematan penggunaan air dan tidak ada indikator level air. Sehingga dapat menggangu proses didalam pretreatment pembilasan part. Permasalahannya adalah pengecekan level air, suhu dan penyemprotan air ke part tidak terkontrol. Dan juga akan berdampak pada proses kualitas dalam produksi. Dalam hal ini system pengontrolan sangat diperlukan guna mengontrol seluruh parameter yang ada pada pretreatment sehingga dapat memaksimalkan proses produksi. Sehingga penelitian membahas implementasi logika fuzzy pada pengontrol motor pompa, temperatur dan ketinggian air. untuk proses penyemprotan bagian di area preatreatment, guna membantu proses pengontrolan kecepatan pompa air dan pengontrolan kecepatan pompa air. suhu dan ketinggian air pada proses pretreatment pembilasan bagian. Konsep IoT diterapkan dalam penelitian ini. Berdasarkan hasil analisa dan pengujian yang dilakukan pada penelitian ini, pada pengukuran suhu sensor DS18b20 mempunyai error sebesar 0.73%, pengukuran level menggunakan sensor ultrasonic mempunyai error sebesar 2.07%. Pada pengukuran kecepatan motor mempunyai error sebesar 1.6 %. Kecepatan transfer data IoT sebesar 14 second menggunakan ThinkSpeak. Dan untuk pengukuran nilai keluaran fuzzy logic mempunyai nilai yang hampir sama dengan peracangan menggunakan matlab. Dengan sample pengujian menggunakan suhu 44 C dan level 10 cm menghasilkan nilai pwm 127Downloads
References
W. Budiharto, Widodo. “Elektronik Digital dan Mikroprosesor,” Yogyakarta: Andi, 2010.
T. Ahmed and A. Ahmad, “Fuzzy logic controller for washing machine with five input &three output”, International Journal of Latest Trends in Engineering and Technology, Vol. 7, No. 2, pp. 136–143, 2016.
K. Kaleeswari, T. Johnson and C. Vijayalakshmi, “Analysis of Fuzzy Logic Based Control Model For Water Treatment Plant In Indian Scenario,” ARPN Journal of Engineering and Applied Sciences, Vol. 13, No. 5, 2018.
Dina Stefani Purba, Porman Pangaribuan, and Agung Surya Wibowo, “Pengendalian Suhu Air Berdasarkan Durasi Pemanasan Menggunakan Fuzzy Logic Dan Pi Kontroler,” eProceedings of Engineering, vol. 5, no. 3, 2018, doi: 10.34818/eoe.v5i3.8132.
R. F. Masood, “Application of Fuzzy Logic in Design of Smart Washing Machine,” arXiv.org, 2017, doi: 10.48550/arXiv.1701.01654.
K. Raja and S. Ramathilagam, “Fuzzy logic control system of washing machine using Python,” Malaya Journal of Matematik, Vol. S, No. 1, 476-479, 2021.
J. M. S. Waworundeng, N. C. Suseno, and R. R. Y. Manaha, “Automatic Watering System for Plants with IoT Monitoring and Notification,” CogITo Smart Journal, vol. 4, no. 2, pp. 316–326, Jan. 2019, doi: 10.31154/cogito.v4i2.138.316-326.
Z. A. Abduljabar, “Simulation and Design of Fuzzy Temperature Control for Heating and Cooling Water System”, International Journal of Advancements in Computing Technology, Vol. 3, No. 4, pp. 41-48, 2011.
J. E. Istiyanto, “Pengantar Elektronika & Instrumentasi,” Yogyakarta: Andi, 2014.
Chia-Feng Juang and Jung-Shing Chen, "Water bath temperature control by a recurrent fuzzy controller and its FPGA implementation," in IEEE Transactions on Industrial Electronics, vol. 53, no. 3, pp. 941-949, June 2006, doi: 10.1109/TIE.2006.874260.
R. Nikiuluw, Renggi, “Kendali Suhu Menggunakan Fuzzy Logic Untuk Sistem Pasteurisasi Susu,” Skripsi. Surabaya : STIKOM, 2018
R. Rohmadoni, “Penerapan Logika Fuzzy Pada Rancang Bangun Alat Otomatisasi Mesin Pemeriksa Torsi DOTE100N3-G - UMB Repository,” Mercubuana.ac.id, Jan. 2021, doi: http://repository.mercubuana.ac.id/53516/1/01.%20Cover.pdf.
S. N. Sivanandam, S. N.Deepa and S. Sumathi, “Introduction to Fuzzy Logic using MATLAB”. Springer. Verlag. Berlin. Heidelberg, 2007.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
