ANALISIS PEMILIHAN KOMPONEN UTAMA MESIN PRESS KOMPAKSI METALURGI SERBUK UNTUK KAPASITAS 10 TON
DOI:
https://doi.org/10.22441/jtm.v12i3.21410Keywords:
Pemilihan Komponen, Mesin PressAbstract
Dalam memenuhi kebutuhan pasar yang menginginkan kualitas tinggi Mesin Press yang bermutu dengan harga yang ekonomis maka dilakukan analisis pemilihan komponen utama pada mesin agar Kualitas dari mesin press kompaksi diharapkan dapat mengungguli produk yang sudah ada di pasaran. Selain itu dengan adanya analisis pemilihan komponen ini kualitas produk ini diharapkan dapat mengungguli dari segi kualitas produk dan harga mesin press kompaksi lainnya.
Pada penelitian ini difokuskan pada evaluasi kualitas produk dan kemampuan mesin press kompaksi. Pembuatan mesin Press Kompaksi yang tidak didesain (dirancang) terlebih dahulu akan menjadi try an error (coba-coba) sehingga membuang biaya dan membuang waktu. sedangkan proses desain yang tidak menggunakan metode perancangan akan Menjadi Sulit dan tidak sederhana. Tujuan penelitian ini untuk Melakukan Analisis pemilihan komponen Mesin press kompaksi metalurgi serbuk dan mengkaji serta membuat sketsa desain alat untuk kemudian dianalisis komponen-komponenya yang dapat memenuhi spesifikasi untuk produksi alat. Hasil yang diharapkan dari penelitian ini adalah spesifikasi komponen yang tepat, sehingga desain mesin press kompaksi Metalurgi Serbuk yang dibuat sudah lengkap dengan jenis Material yang digunakan pada desain mesin tersebut.
Downloads
References
D. M. Vdi, “Jurnal Teknik Mesin: Vol. 08, No.3, Juni 2019 Perancangan Mesin Distribusi Grease Di Pt. Xyz Dengan Metode Vdi 2221,” vol. 08, no. 3, 2019.
W. P. J, D. R. Lucitasari, and S. Sutrisno, “Analisis Ekonomi Dan Perancangan Alat Pengupas Kulit Ari Kacang Hijau Dengan Metode Vdi 2221,” Opsi, vol. 11, no. 2, p. 141, 2018, doi: 10.31315/opsi.v11i2.2555.
M. Syaukani, F. Paundra, F. Qalbina, I. D. Arirohman, P. Yunesti, and S. Sabar, “Desain dan Analisis Mesin Press Komposit Kapasitas 20 Ton,” J. Sci. Technol. Vis. Cult., vol. 1, no. 1, pp. 29–34, 2021.
A. A. Syukur and A. Husnul Khotimah, “Rancang Bangun Alat Pencetak Elektroda Edm (Electrical Discharge Machine) Dengan Tenaga Hidrolik Dari Bahan Serbuk Tembaga,” pp. 51–56, 2018.
N. Linda Anggraini, S. Sitorus, R. Gunawan Jurusan Kimia, and U. Mulawarman, “Prosiding Seminar Nasional Kimia,” vol. 978, pp. 602–50942, 2018.
T. Rusianto, “Hot Pressing Metalurgi Serbuk Aluminium Dengan Variasi Suhu Pemanasan,” J. Teknol., vol. 2, no. 1, pp. 89–95, 2009.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
