RESEARCH REVIEW ON THE DESIGN OF FLOW LOSS TEST EQUIPMENT IN PIPE INSTALLATIONS
DOI:
https://doi.org/10.22441/jtm.v13i3.16960Keywords:
Fluid, head losses, major losses, minor losses, pipeAbstract
This literature review study is motivated by the important role of the piping system in determining production results in an industry. The fluid flowing through the piping system experiences instability, resulting in Head Losses. As a result, the fluid pressure is lower than desired, resulting in suboptimal system performance. The aim of this study is to identify a research gap concerning a review of the design of Head Losses test equipment that has been made by previous researchers. The analysis was conducted by literature review using the systematic literature review (SLR) method. Based on a review from 30 journal, it was found that to design a head losses test equipment in a pipe installation, a person must have a basic knowledge of fluid mechanics. Furthermore, an understanding of the function of pumps, pipe installations, pressure gauges, and measuring instruments that are part of the functional system in this test equipment is required. These are the author's references for designing flow loss test equipment that will be used in the Mechanical Engineering Laboratory at Mercu Buana University's Faculty of Engineering.Downloads
References
Eswanto & Dian, S. Analisa Distribusi Kapasitas Aliran Fluida Di Daerah Percabangan Pada Sistem Perpipaan. Jurnal Teknologi Penerapan, Vol.3, No.1, Pp. 7-11. Mar. 2017.
Ubaedilah. Analisa Kebutuhan Jenis Dan Spesifikasi Pompa Untuk Suplai Air Bersih Di Gedung Kantin Berlantai Tiga Pt. Astra Daihatsu Motor. Jurnal Teknik Mesin, Vol. 5, No. 3, Pp. 119-127. 2016.
Ismet, E.P, Sulaiman & Ari, Galsha. Analisa Rugi Aliran (Head Losses) Pada Belokan Pipa
Pvc. Seminar Nasional Peranan Ipteks Menuji Industri Masa Depan. Jul. 2017.
Dery, Krisdwiyanto. & Andi, M.A.. Pengujian Alat Uji Rugi-Rugi Aliran Dalam Pipagalvanis, Pipa Pvs, Pipa Stainless Steel Dan Pipa Acrylic. Zona Mesin,Vol. 8, No.2. Aug. 2017.
Dwi, Ermadi., & Darmanto. Perancangan Alat Praktikum Pengujian Headloss Aliran Fluida Tak Termampatkan. Jurnal Ilmiah Cendekia Eksakta, Vol.2, No.2. 2017.
Eko, A.C., Sutomo, Ns. &, Aris, H. Literature Review: Panduan Penulisan Dan Penyusunan. Jurnal Keperawatan, Vol.12, No.2. Aug. 2019.
Guillaume, Lame. Systematic Literature Reviews: An Introductio’. International Conference On Engineering Design (Iced19), Vol 1, No.1, Pp. 1633-1642. Jul. 2019.
Nefli, Yusuf., & Hariadi. Analisis Hasil Percobaan Alat Praktikum Rugi Rugi Aliran Dalam Pipa. Rang Teknik Jurnal, Vol.4, No.1. 2021.
Sepfitrah & Yose, Rizal. Analisis Pressure Drop Pada Instalasi Pipa Alat Uji Rugi Rugi Aliran Menggunakan Cfd Fluent 6.0. Jurnal Aptek, Vol. 5, No. 1, Pp. 45-56. Oct.2013.
Tabah, Priangkoso & Dwi, Ermadi. Perancangan Alat Praktikum Uji Kerugian Tekanan Aliran Air Dalam Pipa. Momentum,Vol.18, No.1, Pp.5-11. Apr. 2022.
Darmulia, Darmulia & Rahman, Fadhli & Ismail, Ismail & Burhan, Rizal. Analisis Pengaruh Perubahan Katup Pada Pipa Galvanis Dan Stainless Terhadap Kerugian Head. Iltek : Jurnal Teknologi. Vol.16, No.2, Pp.65-69. 2021.
Nur, Hayati., Adi, Purwanto., Erwan, Muladi. Pengaruh Diameter Knee Pada Head Loss Aliran Berbasis Monogram, Cad Dan Cae. Journal Of Mechanical Engineering, Manufactures, Materials And Energy, Vol.5, No.2, Pp.194-201. Dec. 2021.
R. Bachrun., Et.Al. The Effect Of Discharge On Head Loss With Straight And Bend Flow Directions In The Pipeline. Iop Conf. Series: Earth And Environmental Science, Vol. 841. Aug. 2020.
Sudirman. Major And Minor Head Losses Analysis On The Piping System In Pondok Pesantren Tahfizhul Qur'an Ibnu Abbas Tarakan. Journal Of Applied Electrical & Technology, Vol. 3, No. 1. Mar. 2021.Aline, A,M. Major And Minor Head Losses In A Hydraulic Flow Circuit: Experimental Measurements And A Moody's Diagram Application. Eclética Química, Vol.45, No.3, Pp. 47-56. Jul. 2020.
Achour, B. & Amara, L. Head Loss Computation In A Divergent Circular Pipe : Circular Pipe Calcul De La Perte De Charge Dans Une Conduite Circulaire Divergente. Larhyss Journal, Pp.45-65. Dec. 2019.
Arasy, F. & Mulyadi. Rancangan Bangun Alat Uji Headlosses Dengan Variasi Debit Dan Jarak Elbow 90 Untuk Sistem Perpipaan Yang Efisien. Jurnal Teknik Mesin Univ. Muhammadiyah Medan, Vol.7, No.1, Pp. 32- 35. 2018.
M. Rivamey. F. Analisis Penurunan Head Losses Pada Belokan 180° Dengan Variasi Tube Bundle Pada Diameter Pipa 2 Inchi. Jurnal Simki Techsain, Vol.1, No.1. Feb. 2017.
Irfan, M.R. & Adi, Syuriadi. Analisis Faktor Head Losses Penstock Terhadap Daya Yang Dihasilkan Di Plta Saguling. Jurnal Poli-Teknologi, Vol.15, No.3. Mar. 2017.
Edi, Widodo. & Indah, S. Rekayasa Instalasi Pompa Untuk Menurunkan Head Loss. Prosiding Sntt Fgdt, Vol.4. Nov. 2016.
Hariyono., Gatut, R., & Haris. M. Study Eksperimental Perilaku Aliran Fluida Pada Sambungan Belokan Pipa. Jurnal Prodi Teknik Mesin Universitas Pgri Banyuwangi, Vol. 1, No. 1, Pp. 12-14. Nov. 2016.
Sarjito., Subroto & Arif, Kurniawan. Studi Distribusi Tekanan Aliran Melalui Pengecilan Saluran Secara Mendadak Dengan Belokan Pada Penampang Segi Empat. Jurnal Teknik Mesin, Vol.17, No.1. Jan. 2016.
Lahiouel, Y. & Lahiouel. R. Evaluation Of Energy Losses In Pipes. American Journal Of Mechanical Engineering, Vol.3, No.3,Pp. 32-37. Oct. 2015.
Imam. Suprayogi., Bochari., Joleha., & Amril. Fenomena Kehilangan Energi Pada Pipa Menggunakan Pendekatan Model Fisik Skala Laboratorium. Jurnal Aptek, Vol. 6, No.2, Pp. 159-164. Jun. 2014.
Sodiki, J.I., & Adigio, E.M. The Head Loss Ratio In Water Distribution: Case Study Of A 448-Bed Student Hostel. Innovative Systems Design And Engineering, Vol.5, No.5 Pp.91-100. 2014.
Jhon, F.S. & Jorfri, B. S. Perancangan Alat Uji Gesekan Aliran Di Dalam Saluran. Jurnal Ilmiah Teknik Mesin, Vol. 1, No.1. 2013.
Md. Shamim,Reza., A.H.M, Fazle, Elahi., M.
R. Halder. Design Construction And Testing Of A Fluid Head Loss Measuring Apparatus. International Conference On Mechanical, Industrial And Energy Engineering, Vol.2. Jan. 2013.
Muchsin. Kerugian-Kerugian Pada Pipa Lurus Dengan Variasi Debit Aliran. Jurnal Mekanikal, Vol.4, No.2, Pp.386-392. Jul. 2013.
Rachmat, Subagyo. Kaji Eksperimental Koefisien Kerugian Pada Percabangan Pipa Dengan Sudut 45, 60 Dan 90. Jurnal Fisika Flux, Vol.9, No.2, Pp. 144-150. 2012.
Untung. S. D. & Galih. P. Pengaruh Perubahan Laju Aliran Terhadap Tekanan Dan Jenis Aliran Yang Terjadi Pada Alat Uji Praktikum Mekanika Fluida. Turbo, Vol.1, No.2, Pp.106-115. Dec. 2012..
Zainudin., I Made.A,S. & I Made, Nuarsa. Analisa Pengaruh Variasi Sudut Sambungan Belokan Terhadap Head Losses Aliran Pipa. Dinamika Teknik Mesin,
Vol. 2, No. 2, Pp.75-83. 2012
Helmizar. Studi Eksperimental Tentang Head Loss Pada Aliran Fluida Yang Melalui Elbow 90°. Jurnal Energi Dan Manufaktur, Vol.1. Apr. 2011.
Lutfi, Nurcholis. Pehitungan Laju Aliran Fluida Pada Jaringan Pipa. Jurnal Traksi, Vol.6, No.1, Pp. 19-31. Jun. 2008.
Tris, Sugiarto. Rancangan Bangun Perangkat Uji Rugi-Rugi Head Dengan Fluida Kerja Air (H20) Dan Analisanya. Intuisi Teknologi Dan Seni, Vol.1, No.2, Pp. 130-134. 2007
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
