Two-stage Anaerobic Reactor Design of SS 316 Material with Application of Penetrant Test Method (NDT)
DOI:
https://doi.org/10.22441/jtm.v13i2.27069Keywords:
Kata kunci, Reaktor Anaerob Dua Tahap, Fermentasi gelap, Non-Destructive Test (NDT), Stainless steel 316Abstract
Abstract-- Anaerobic reactors are essential in processing organic waste, biomass, and wastewater into desired end products through a dark fermentation process. This process involves bacteria decomposing organic matter without light or oxygen, producing hydrogen gas, and other by-products. In this study, the design, manufacture, and testing of a two-stage anaerobic reactor of stainless steel 316 material were carried out carefully, considering dimensions, and material specifications. The device design process involved design simulation using SolidWorks, while the manufacturing stage involved material preparation, component forming, welding, and device installation. Testing was conducted using Nondestructive testing (NDT) methods to detect surface defects, and ensure the structural integrity of the reactor. This study provides an in-depth overview of the manufacturing process of a two-stage anaerobic reactor, including material preparation, welding, and NDT testing, hoping to contribute to developing more effective, and sustainable organic waste treatment technologies.
Downloads
References
O. US EPA, “Fact Sheet: Multi-Stage Anaerobic Digestion.” Accessed: Mar. 31, 2024. [Online]. Available: https://www.epa.gov/biosolids/fact-sheet-multi-stage-anaerobic-digestion
“Three-stage anaerobic digester for food waste | Request PDF.” Accessed: Mar. 31, 2024. [Online]. Available: https://www.researchgate.net/publication/309819442_Three-stage_anaerobic_digester_for_food_waste
W. Fang et al., “Overview of key operation factors and strategies for improving fermentative volatile fatty acid production and product regulation from sewage sludge,” J. Environ. Sci., vol. 87, pp. 93–111, Jan. 2020, doi: 10.1016/j.jes.2019.05.027.
G. Lembo, A. Signorini, A. Marone, C. Carbone, and A. Agostini, “Hydrogen and Methane Production by Single- and Two-Stage Anaerobic Digestion of Second Cheese Whey: Economic Performances and GHG Emissions Evaluation,” Energies, vol. 15, no. 21, Art. no. 21, Jan. 2022, doi: 10.3390/en15217869.
A. R. Salsabila, A. B. D. Nandiyanto, and R. Ragadhita, “DESAIN REAKTOR UNTUK PRODUKSI NANOPARTIKEL ZnO,” J. Inov. Teknol. Manufaktur Energi Dan Otomotif, vol. 1, no. 2, Art. no. 2, Feb. 2023.
S. H. Siahaan, “KAJIAN LAJU KOROSI TERHADAP STAINLESS STEEL DALAM LARUTAN HNO3,” J. Taguchi J. Ilm. Tek. Dan Manaj. Ind., vol. 1, no. 1, Art. no. 1, Jun. 2021, doi: 10.46306/tgc.v1i1.9.
T. Endramawan, E. Haris, F. Dionisius, and Y. Prinka, “APLIKASI NON DESTRUCTIVE TEST PENETRANT TESTING (NDT-PT) UNTUK ANALISIS HASIL PENGELASAN SMAW 3G BUTT JOINT,” JTT J. Teknol. Terap., vol. 3, no. 2, Art. no. 2, Sep. 2017, doi: 10.31884/jtt.v3i2.61.
Bambang Trisakti, Irvan, Hari Tiarasti, and Irma Suraya, “PERANCANGAN AWAL PABRIK BIOHIDROGEN DARI LIMBAH CAIR PABRIK KELAPA SAWIT DENGAN FERMENTASI ANAEROBIK PADA KONDISI TERMOFILIK,” J. Tek. Kim. USU, vol. 1, no. 1, pp. 30–37, Sep. 2012, doi: 10.32734/jtk.v1i1.1403.
C. W. Yuwono and T. Soehartanto, “Perancangan Sistem Pengaduk Pada Bioreaktor Batch Untuk Meningkatkan Produksi Biogas,” Journal:eArticle, Sepuluh Nopember Institute of Technology, 2013. doi: 10.12962/j23373539.v2i1.3256.
E. Maulana, B. N. Fajri, and D. Mahardika, “Perancangan Proses Pembuatan Reaktor Pirolisis Model Horizontal Kapasitas 75 Kg/Jam,” Pros. Semin. Nas. Penelit. LPPM UMJ, vol. 2020, no. 0, Art. no. 0, Dec. 2020, Accessed: May 03, 2024. [Online]. Available: https://jurnal.umj.ac.id/index.php/semnaslit/article/view/7428
B. S. Panjaitan, L. Lestari, R. P. A. Setiawan, and A. H. Tambunan, “POTENSI PRODUKSI BIOHIDROGEN DARI LIMBAH BIOMASSA PADA PROSES PENCERNAAN ANAEROBIK,” Agrointek J. Teknol. Ind. Pertan., vol. 15, no. 4, pp. 1149–1158, Dec. 2021, doi: 10.21107/agrointek.v15i4.12480.
A. D. Amalia and A. Chumaidi, “PERANCANGAN REAKTOR PADA PROSES PEMBUATAN DISPROPORTIONATED ROSIN DARI GUM ROSIN MELALUI NETRALISASI ASAM KLORIDA,” DISTILAT J. Teknol. Separasi, vol. 8, no. 3, pp. 581–587, May 2023, doi: 10.33795/distilat.v8i3.453.
P. Puspitasari and J. Juliati, “RANCANG BANGUN FERMENTOR PADA LABORATORIUM BIOPROSES,” Semin. Nas. Has. Penelit. Pengabdi. Kpd. Masy. SNP2M, vol. 7, no. 1, Art. no. 1, 2022.
M. D. Solikhah, A. Prismantoko, A. Prawitasari, B. Restituta, and A. Kismanto, “PERANCANGAN REAKTOR UNTUK PRODUKSI BIODIESEL GENERASI 2 DARI BIOMASA SAWIT,” J. Teknol., vol. 14, no. 2, 2022.
M. Bukhtiyarova, A. Nuzhdin, and G. Bukhtiyarova, “Comparative Study of Batch and Continuous Flow Reactors in Selective Hydrogenation of Functional Groups in Organic Compounds: What Is More Effective?,” Int. J. Mol. Sci., vol. 24, p. 14136, Sep. 2023, doi: 10.3390/ijms241814136.
M. H. Rokhim, “The Influence of Welding Technique With Variation of Current on Surface Defects and Penetration of ST40 Steel,” J. Technol. Sci., vol. 1, no. 1, pp. 181–188, 2024.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
