Analisis cacat painting komponen automotive dengan pendekatan DMAIC-FMEA
DOI:
https://doi.org/10.22441/oe.2020.v12.i1.009Kata Kunci:
quality, defects, spots/dirty, DMAIC, six sigma, FMEA.Abstrak
Increasing competition among competitors demands the automotive component painting industry to improve product quality, visual impairment dominates painting process product. High defects lead to quality degradation, set KPI targets have not been achieved, 1-year average defects are 5.4% from 4.2% targets. To improve the quality and to analyze product non-compliance, DMAIC and FMEA approaches are used. The use of Six Sigma can analyze defects in production. A number of improvements have been made to ensure that the objectives are met, from the analysis it was found that the highest percentage of defects in Line 1 was 6.86% and type of spot/dirty was 36.3%, DPMO value 7619 and sigma value 3.9. The analysis with FMEA based on the highest 8 RPN values is the priority of improvement, the main factor influencing spot /dirty from the machine. Regular maintenance and cleaning need to be emphasized, easily contaminated chemicals require special handling, alterations of hanger design by adding dishes should be done to prevent dirt from falling into product.Unduhan
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
