PENILAIAN KINERJA BERKELANJUTAN PRODUK SABUN CAIR WAJAH DENGAN METODE LIFE CYCLE ANALYSIS (LCA)
DOI:
https://doi.org/10.22441/pasti.2022.v16i3.002Keywords:
Berkelanjutan, Life Cycle Analysis (LCA), Root Cause Analysis (RCA), IKM Kosmetik, Sabun WajahAbstract
Peningkatan konsumsi produk-produk kosmetik menuntut tanggung jawab para pelakunya terhadap industry yang berkelanjutan. Sayangnya IKM Kosmetik belum memiliki pengetahuan untuk melakukan penilaian kinerja berkelanjutan, dan penelitian-penelitian tentang subyek tersebut terbatas. Penelitian ini bertujuan untuk membantu para pelaku bisnis IKM Kosmetik dalam melakukan penilaian kinerja berkelanjutan. Metode yang digunakan adalah Life Cycle Analysis (LCA) dan Root Cause Analysis (RCA), dengan ruang lingkup penilaian adalah dari pengadaan bahan baku di supplier hingga distribusi ke customer. Hasil penilaian LCA untuk 316 kg sabun wajah secara end point analysis adalah 19.7 Pt. Kontributor dampak terbanyak adalah dari penggunaan bahan baku Sodium Laureth Sulfate (SLES) dan konsumsi listrik. RCA dengan teknik brainstorming mengungkap penyebab utamanya adalah konsumsi bahan baku SLES yang mencapai 10% dari komposisi formulasi. Sebagai strategi perbaikan, peneliti merekomendasikan penguatan aktivitas riset dan pengembangan terkait formulasi material, pencarian alternatif material pengganti, dan peremajaan peralatan elektronik dan monitoring penggunaannya.
Downloads
References
Amrina, U., & Zagloel, T. Y. M. (2019). The harmonious strategy of lean and green production: Future opportunities to achieve sustainable productivity and quality. Paper presented at the 2019 IEEE 6th International Conference on Industrial Engineering and Applications (ICIEA).
Eaton, M. (2013). The lean practitioner's handbook: Kogan Page Publishers.
Gareta, S. P. (2021). Kemenperin: Industri kosmetik tumbuh signifikan pada 2020. Antara. Retrieved from https://www.antaranews.com/berita/2003853/kemenperin-industri-kosmetik-tumbuh-signifikan-pada-2020
Georgise, F. B., & Mindaye, A. T. (2020). Kaizen implementation in industries of southern ethiopia: Challenges and feasibility. Cogent Engineering, 7(1), 1823157. doi:10.1080/23311916.2020.1823157
Guilbot, J., Kerverdo, S., Milius, A., & Pomrehn, F. (2013). Life cycle assessment of surfactants: The case of an alkyl polyglucoside used as a self emulsifier in cosmetics. Green chemistry, 15(12), 3337-3354.
Hasibuan, S., & Hidayati, J. (2018). The integration of cleaner production innovation and creativity for supply chain sustainability of bogor batik SMEs.
Mittal, V. K., Sindhwani, R., Kalsariya, V., Salroo, F., Sangwan, K. S., & Singh, P. L. (2017). Adoption of integrated lean-green-agile strategies for modern manufacturing systems. Procedia CIRP, 61, 463-468.
PRe Sustainability. (2020). Simapro database manual - methods library. In: PRé Sustainability B.V.
Reis, L. V., Kipper, L. M., Giraldo Velásquez, F. D., Hofmann, N., Frozza, R., Ocampo, S. A., & Taborda Hernandez, C. A. (2018). A model for lean and green integration and monitoring for the coffee sector. Computers and Electronics in Agriculture, 150, 62-73. doi:10.1016/j.compag.2018.03.034
Riazi, B., Zhang, J., Yee, W., Ngo, H., & Spatari, S. (2019). Life cycle environmental and cost implications of isostearic acid production for pharmaceutical and personal care products. ACS Sustainable Chemistry & Engineering, 7(18), 15247-15258.
Vargas-Gonzalez, M., Witte, F., Martz, P., Gilbert, L., Humbert, S., Jolliet, O., van Zelm, R., & L'Haridon, J. (2019). Operational life cycle impact assessment weighting factors based on planetary boundaries: Applied to cosmetic products. Ecological Indicators, 107, 105498.
Villena, K., & Beckwith, G. (2020). Word market for beauty and personal care in september 2020.
Yuliansyah, H., Rimawan, E., & Setyadi, A. (2022). Effect of the implementation of iso 9001: 2015 quality management system on the performance of companies and consumers in the chemical industry. Journal of Positive School Psychology, 8195–8205-8195–8205.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
