INTEGRASI FAILURE TRACKING MATRIX BERBASIS HOUSE OF QUALITY DAN FAILURE MODES EFFECT ANALYSIS UNTUK PELACAKAN KEGAGALAN PROSES PADA SISTEM PEMELIHARAAN
Keywords:
Failure Tracking Matrix (FTM), Maintenance System, Failure Modes, Effect Analysis (FMEA)Abstract
Penelitian ini bertujuan untuk membangun model pelacakan kegagalan proses pada sistem pemeliharaan sehingga kelancaran produksi terjamin dan menghasilkan produk yang berkualitas. Model dibangun dengan mengembangkan model pengendalian kualitas Defect Tracking Matrix (DTM) yang dikembangkan oleh Wang & Ling (2007) yang menjadi dasar pengembangan model Failure Tracking Matrix (FTM). Untuk mencegah/mengurangi resiko kegagalan proses terulang kembali dilakukan analisis dengan metode FMEA. FTM juga bisa menjadi masukan pembuatan model Failure Mode and Effect Analysis (FMEA). Dari Penerapan studi kasus di Divisi Produksi 2 PT KTI dengan analisis FTM didapatkan 21 jenis Failure Mode (FM) dan 19 fuctional failure component (FC) pada 3 modul produk rangka piano Kawai yang mempunyai defect terbesar dalam 6 bulan terakhir. Hasil FTM setelah diintegrasikan dengan FMEA didapatkan 10 prioritas perbaikan berdasarkan nilai RPN dan saran perbaikan dilakukan untuk menghindari terulangnya kegagalan proses produksi pada 5 mesin di Divisi produksi 2 yang digunakan untuk memproduksi rangka piano Kawai.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
