Analisis Proses Kerja pada Gudang Spare Part Industri Manufaktur
DOI:
https://doi.org/10.22441/pasti.2020.v14i3.010Keywords:
warehouse, pick up process, operating ProcedureAbstract
This research aims to analyze the work procedures contained in the activity of spare part issuance and provide suggestions for improvement for the work procedures for spare part storage. The data used is the Standard Operating Procedure (SOP) for spare part expenditure as well as existing problems. The problem that occurs is that the storage work process in the spare part warehouse does not yet have a Standard Operating Procedure (SOP) and the work process for the removal of spare parts is not carried out in accordance with existing procedures. That caused a difference in the actual amount of stock with the system. The problem in the storage process is that spare parts are not stored in accordance with the storage location and for the warehouse worker expenditure process does not use the Proof of Request for Goods (BPB) or related documents. The cause of the problem was analyzed using the fishbone diagram method with several factors, namely human, method, environment, machine and material factors and used a questionnaire to determine the potential root causes of the problem. For proposed improvements using the 5W + 1H method. Based on the results of the analysis of the 5W + 1H method, the proposed improvement is in the form of a Standard Operating Procedure (SOP) for storing spare parts and making the identity of each spare part that is stored.
Downloads
References
Djaali. (2008). Psikologi Pendidikan. Jakarta: Bumi Aksara.
Fatimah, F. N. D. (2014). Pedoman Praktis Menyusun Standard Operating Procedure. Yogyakarta: Quadrant.
Gaspersz, V. (2002). Total Quality Management. Jakarta: PT Gramedia Pustaka Utama.
Sailendra, A. (2015). Langkah-Langkah Praktis Membuat SOP. Yogyakarta: Trans Idea Publishing.
Sekaran, U. (2011). Metode Penelitian untuk Bisnis. Jakarta: Salemba Empat.
Soejitro, P. (2010). Instrumen Total Quality Management (TQM) sebagai pilihan alat pengendalian. Value Added, 6 (2), pp.49-60.
Sugiyono. (2017). Metode Penelitian Kuantitatif, Kualitatif dan R & D. Bandung: Alfabeta.
Ulkhaq, M. M. & Rasyida, D. R. (2016). Aplikasi Seven Tools Dan Analisis 5w+1h Untuk Mengurangi Cacat Produk Galon: Studi Kasus Di PT. Berlina, Tbk. Prosiding Seminar Nasional Multi Disiplin Ilmu & Call For Papers Unisbank (Sendi_U) Ke-2 Tahun 2016, pp. 330-338.
Utami, R. (2018). Analisis Ketidaksesuaian Jumlah Stock Pipa uPVC pada PT Pralon Cimanggis. Jakarta : Politeknik APP Jakarta.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
