Rancang Bangun Sistem Pintu Busway Otomatis Berbasis Internet Of Things
DOI:
https://doi.org/10.22441/jte.2020.v11i3.001Kata Kunci:
MIT App Inventor 2, Arduino Mega, ESP8266, Firebase, Motor Servo, RFIDAbstrak
Busway yang bertujuan sebagai transportasi massal yang diharapkan dapat menanggulangi kemacetan yang ada di Jakarta. Dan di bangun pula jalur busway yang bertujuan untuk memisahkan antara jalur utuk kendaraan umum dengan jalur khusus busway serta di buat portal sebelum memasuki jalur busway supaya tidak ada kendaraan lain yang ikut masuk ke jalur busway. Namun pemasangan portal ini memiliki kelemahan yaitu harus adanya petugas yang harus siap membukanya dengan tepat supaya busway dapat melaluinya dan menutupnya dengan cepat. Dengan adanya perkembangan di bidang teknologi yakni RFID (Radio Frequency Identification) yang dapat dimanfaatkan untuk mendeteksi busway yang hendak melewati portal, yang kemudian portal akan membuka dan menutup secara otomatis tanpa harus adanya lagi petugas. Oleh karena itu dibuatlah sistem automasi palang pintu busway ini supaya dapat berkerja otomatis dengan teknologi RFID. Dari pengujian yang telah dilakukan pada rancang bangun sistem palang pintu busway otomatis berbasis internet of things ini adalah pada pengujian motor Servo 1 dengan aplikasi MIT App Inventor 2 didapat hasil rata-rata waktu 2.26 detik sedangkan dengan pembacaan RFID didapat hasil rata-rata waktu 1.4 detik. Pada pengujian motor Servo 2 dengan aplikasi MIT App Inventor 2 didapat hasil rata-rata waktu 2.33 detik sedangkan dengan pembacaan RFID didapat hasil rata-rata waktu 1.15 detik.
Unduhan
Referensi
R. G. Hasudungan and R. S. Dewi. Statistik Daerah DKI Jakarta. Badan Pusat Statistik DKI Jakarta. No. Publikasi : 31550.13.02. 2017.
D. Eridani, Y. Christiyono and I. Santoso, “Simulasi Gerbang Tol Menggunakan RFID (Radio Frequency Identification)”, Universitas Diponegoro Semarang. 2011
A. Fauzi and Mushlihudin, “Rancangan Sistem Palang Pintu Otomatis Pada Jalur Bus Rapid Transit (BRT) Berbasis Arduino”, Jurnal Ilmu Teknik Elektro Komputer dan Informatika (JITEKI), Vol. 3, No. 2, 2017
R. Hossain, M. Ahmed, M. M. Alfasani and H. U. Zaman, “An Advanced Security System Integrated With RFID Based Automated Toll Collection System”, IEEE. 2017
K. Kamarulazizi and W. Ismail, “Electronic Toll Collection System Using Passive Rfid Technology”, Journal of Theoretical and Applied Information Technology. 2010
B. S. R. Purwanti, T. S. Ningsih., S. P. Wibowo, E. D. Tirwanda and M. Fadli, “Integrasi Sensor Ultrasonik Dan Bluetooth Pada Sistem BukaTutup Palang Busway”, Sekolah Tinggi Teknologi Nasional Yogyakarta. 2017
S. N. A. Suratun, “Prototipe Palang Pintu Otomatis Untuk Busway Berbasis Infra Red”, Universitas Ibn Khaldun Bogor. 2015
B. A. Wibawa, A. Ardianto and M. Subekti, “Prototype Portal Transjakarta Otomatis Berbasis ATMEGA 853”, Universitas Negeri Jakarta, Vol.1, No.1. 2014
M. H. I. Hajar, A. W. Dani and S. Miharno, “Monitoring of Electrical System Using Internet of Things With Smart Current Electric Sensors.” Sinergi, 22(3), 211. 2018 https://doi.org/10.22441/sinergi.2018.3.010
A. Adriansyah, S. Budiyanto, J. Andika, A. Romadlan, and N. Nurdin, “Public street lighting control and monitoring system using the internet of things,” AIP Conf. Proc., vol. 2217, no. April, 2020, doi: 10.1063/5.0000594
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
