Reducing reject cotter valve skyrocketing cylinder head parts in retainer Press Machine Process in the automotive industry

Edwar Rosyidi, Aprianto Wibisono, Rohmat Setiawan, Noviani Putri Sugihartanti, Januar Parlaungan Siregar, Hafiidz Satria Pratama

Abstract


The automotive industry is an automotive company that produces various types of motorcycles, such as automatic, sport and cub. One of the processes is machining. This process is very important because quality is highly considered. In the machining process, the products produced are crankcase R, crankcase L, cylinder comp, cylinder head, crankshaft. Based on initial observations, this process found reject goods. In the cylinder head line machining area, especially the retainer press machine, there is a problem of reject cotter valve soaring and resulting in the repair process. This will have an impact on the addition of time to repair and product quality is reduced. PT XYZ is facing a problem with cotter valve soaring on the cylinder head product with daily report data for the last 3 months, the percentage of cotter valve soaring problems reaching 1.5% exceeding the maximum defect target of 0.5%. This study aims to reduce the level of reject cotter valve soaring during the retainer press machine pressing process. The method used is eight steps. One solution is to modify the punch size to adjust the urethane punch to work optimally. This process will have an impact on reducing the number of rejects. In addition, this repair also does not cause a repair process on the cylinder head part. The results of this study are very significant with the reduction in cotter cases soaring to 0.2%

Keywords


Coter Valve-; Cylinder Head-2; Press-3

Full Text:

PDF

References


Abhilash, C. R., & Thakkar, J. J. (2019). Application of Six Sigma DMAIC methodology to reduce the defects in a telecommunication cabinet door manufacturing process: A case study. International Journal of Quality and Reliability Management, 36(9), 1540–1555. https://doi.org/10.1108/IJQRM-12-2018-0344

Aprianto, T., Nuryono, A., Setiawan, I., Kurnia, H., & Purba, H. H. (2022). Waste Analysis in the Speaker Box Assy Process to Reduce Lead Time in the Electronic Musical Instrument Industry. Quality Innovation Prosperity, 26(3), 53–65. https://doi.org/10.12776/qip.v26i3.1744

Darmawan, H., Hasibuan, S., & Hardi Purba, H. (2018). Application of Kaizen Concept with 8 Steps PDCA to Reduce in Line Defect at Pasting Process: A Case Study in Automotive Battery. International Journal of Advances in Scientific Research and Engineering, 4(8), 97–107. https://doi.org/10.31695/ijasre.2018.32800

Gandara, G. S., & Hasibuan, S. (2020). Analisis penerapan SNI ISO 9001: 2015 melalui jumlah ketidaksesuaian produk, proses dan pelayanan pada PT. X. Jurnal Standardisasi, 22(3), 171.

Irwanto, A., Arifin, D., & Arifin, M. M. (2020). Peningkatan Kualitas Produk Gearbox Dengan Pendekatan DMAIC Six Sigma Pada PT. XYZ. Jurnal KaLIBRASI-Karya Lintas Ilmu Bidang Rekayasa Arsitektur Sipil Industri, 3(1), 1–17. https://doi.org/10.37721/kalibrasi.v3i1.638

Khamaludin, & Respati, A. P. (2019). Implementasi Metode QCC untuk Menurunkan Jumlah Sisa Sampel Pengujian Compound. Jurnal Optimasi Sistem Industri, 18(2), 176–185. https://doi.org/10.25077/josi.v18.n2.p176-185.2019

Lucky, B. O., & Takim, S. (2015). Manufacturing defects in the automobile industry, a case study of the remote causes and effects of Toyota’s transmission malfunctions in cars. International Journal of Engineering and Applied Sciences (IJEAS), 2(8), 15–29. www.ijeas.org

Mott, R. L. ., Vavrek, E. M. ., & Wang, Jyhwen. (2018). Machine elements in mechanical design (6th ed.). Pearson.

Murray, J. W., Jin, X., Cleaver, C. J., Azevedo, J. M. C., Liao, Z., Zhou, W., Cullen, J. M., Allwood, J. M., & Clare, A. T. (2024). A review of principles and options for the re-use of machining chips by solid, semi-solid or melt-based processing. Journal of Materials Processing Technology, 331. https://doi.org/10.1016/j.jmatprotec.2024.118514

Nurjaman, B., Insan Waluya, A., & Sasmi, W. T. (2024). Quality Control of Head Cylinder Products Using the Seven Tools Approach at PT Otomotif Indonesia. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 10(2), 335–344.

Praharsi, Y., Jami’in, M. A., Suhardjito, G., & Wee, H. M. (2020). Six sigma implementation and analysis-An empirical study of a traditional boat building industry in Indonesia. Proceedings of the International Conference on Industrial Engineering and Operations Management, 0(March), 3092–3100.

Setiawan, I., & Setiawan. (2020). Defect reduction of roof panel part in the export delivery process using the DMAIC method: a case study. Jurnal Sistem Dan Manajemen Industri, 4(2), 108–116. https://doi.org/10.30656/jsmi.v4i2.2775

Sulaeman, G. M. R., & Gusniar, I. N. (2023). Analisis Pengendalian Kualitas Menggunakan Metode Quality Control Circle pada Part JK6000 di PT. XYZ. Jurnal Serambi Engineering, 8(2), 5029–5036. https://doi.org/10.32672/jse.v8i2.5665

Suratno, & Ichtiarto, B. P. (2021). Reduce Carbon Emissions of Logistic Transportation Using Eight Steps Approach in Indonesian Automotive Industry. Journal Europeen Des Systemes Automatises, 54(6), 819–826. https://doi.org/10.18280/jesa.540603

Yang, Q., Cheng, C., El-aty, A. A., Liu, C., Hu, S., Qin, Y., Li, T., Wu, C., XU, Y., & GUO, X. (2022). Effects of punch size, magnetic field, and magnetorheological elastomers medium on forming T-shaped thin-walled Inconel 718 tubes. Chinese Journal of Aeronautics, 35(1), 226–237. https://doi.org/10.1016/j.cja.2020.09.032

Zhang, W., & Xu, J. (2022). Advanced lightweight materials for Automobiles: A review. Materials and Design, 221. https://doi.org/10.1016/j.matdes.2022.110994




DOI: http://dx.doi.org/10.22441/oe.2025.v17.i1.131

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Operations Excellence: Journal of Applied Industrial Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Journal ISSN:

Portal ISSNPrint ISSN: 2085-4293
Online ISSN: 2654-5799

Tim Editorial Office
Operations Excellence: Journal of Applied Industrial Engineering
Magister Teknik Industri Universitas Mercu Buana
Jl. Raya Meruya Selatan No. 1 Kembangan Jakarta Barat
Email: [[email protected]]
Website: http://publikasi.mercubuana.ac.id/index.php/oe
Journal DOI: 10.22441/oe

The Journal is Indexed and Journal List Title by:

                 

 

 

Operations Excellence: Journal of Applied Industrial Engineering is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

 

bandar togel

toto slot

toto slot

situs totoslot88

>