Determination of standard time with the stopwatch time study method at PT BI

Anas Anugerah Ramadhan, ⁠Sukanta ⁠Sukanta, Risma Fitriyani

Abstract


In the manufacturing industry, the effectiveness of the work process is one of the key factors to increase the efficiency and competitiveness of the company. One of the main challenges is the accurate determination of standard working times, especially in processes involving manual inspections. Without a clear standard time standard, setting work targets is often not optimal, which can result in uneven workload, decreased productivity, and worker fatigue. PT BI is an automotive component manufacturing company that uses cold forging technology. One of the important processes in this company is visual inspection to guarantee product quality. However, the company does not yet have a standard time standard in the visual inspection process, so the daily target is determined based on the cycle time, which is less effective. This study aims to analyze the effectiveness of operators in using standard time in achieving targets. The study used the stopwatch time study method to measure the work cycle time in visual inspection operators. Data was collected through observations and interviews with operators as well as analysis using Minitab software. The results of the study show that the application of standard time is able to increase the effectiveness of operators in achieving daily targets. In addition, precise determination of standard timing provides companies with advantages with better process efficiency and reduced operator fatigue levels. In conclusion, the application of standard time can be the optimal solution to increase company productivity while maintaining worker welfare.

Keywords


productivity; standard time; stopwatch; time study

References


Bon, A. T., & Samsudin, S. N. A. (2018). Productivity improvement in assembly line by reduction cycle time using time study at automotive manufacturer. Proc. Int. Conf. Ind. Eng. Oper. Manag, 2018, 284–291.

Daryanto, D. (2021). Manajemen Produksi. Yrama Widya.

Krisnaningsih, E., Dwiyatno, S., & Sasongko, R. (2020). Usulan Penentuan Waktu Baku Pada Operator Packing Folding Kain Tetoron Rayon Dengan Metode Stopwatch. Jurnal Intent: Jurnal Industri Dan Teknologi Terpadu, 3(2), 67–81.

Lestari, E., Kristiyana, N., & Wahyuningsih, D. W. (2022). Pengaruh Pelatihan Kerja, Lingkungan Kerja, Dan Kompensasi Terhadap Tingkat Produktivitas Kerja Karyawan Studi Kasus Pada Ud. Karya Sejatera Desa Campursari Kecamatan Sambit Kabupaten Ponorogo. Bussman Journal: Indonesian Journal of Business and Management, 2(3), 604–619.

Marasabessy, U. R., Astrides, E., Ahistasari, A., Wahyudien, M. A. N., & Rachmadhani, M. M. (2023). Analysis of Work Measurement Using the Stopwatch Time Study Method at PTEA. Journal of Industrial System Engineering and Management, 2(1), 23–31.

Mayselah, N. (2023). Optimalisasi Produktivitas dengan Metode Time and Motion Study di PT. XYZ. Journal of Research on Industrial and System Engineering, 1(1), 1–12.

Montororing, Y. D. R. (2018). Usulan Penentuan Waktu Baku Proses Racking Produk Amplimesh Dengan Metode Jam Henti Pada Departemen Powder Coating. Jurnal Teknik: Universitas Muhammadiyah Tangerang, 7(2), 53–63.

Nurunni’mah, Z. F. (2019). Analisis Pengukuran Kerja Dalam Menentukan Waktu Standar Dengan Metode Studi Waktu Guna Meningkatkan Produktifitas Kerja Pada Shuttlecock PT. Garuda Budiono Putra. Fakultas Ekonomi Dan Bisnis, Universitas Pancasakti, Tegal.

Pradana, A. Y., & Pulansari, F. (2021). Analisis pengukuran waktu kerja dengan stopwatch time study untuk meningkatkan target produksi di PT. XYZ. JUMINTEN, 2(1), 13–24.

Prayuda, S. (2020). Analisis Pengukuran Kerja Dalam Menentukan Waktu Baku Untuk Meningkatkan Produktivitas Kerja Pada Produksi Kerudung Menggunakan Metode Time Study Pada Ukm Lisna Collection Di Tasikmalaya. Jurnal Mahasiswa Industri Galuh, 1(1), 120–126.

Purbasari, A., Sumarya, E., & Mardhiyah, R. (2023). Penerapan Metode Studi Waktu Dan Gerak Pada Proses Packing Di Pt. Abc. Sigma Teknika, 6(2), 290–299.

Rahma, M., & Pratama, A. J. (2019). Pengukuran Waktu Baku Stasiun Kerja Perakitan Komponen Pesawat Garuda Indonesia Temperature Control Valve (TCV) Menggunakan Metode Jam Henti Pada PT. GMF Aeroasia. Seminar Nasional IENACO-2019, 16–23.

Sutaarga, O., & Setiawan, A. (2021). Penentuan waktu baku dalam pengecekan bonding sampel sepatu pada PT. Ching Luh Indonesia. Journal Industrial Manufacturing, 6(1), 18–26.

Wahid, A., & Chumaedi, A. (2020). Penentuan Waktu Baku dengan Metode Stopwatch Time Study Proses Produksi Manifold (UD. Jaya Motor Pasuruan). JKIE (Journal Knowledge Industrial Engineering), 7(2), 54–60.

Yudisha, N. (2021). Perhitungan waktu baku menggunakan metode Jam Henti pada proses Bottling. Jurnal Vorteks, 2(2), 85–90.




DOI: http://dx.doi.org/10.22441/oe.2025.v17.i2.145

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Operations Excellence: Journal of Applied Industrial Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Journal ISSN:

Portal ISSNPrint ISSN: 2085-4293
Online ISSN: 2654-5799

Tim Editorial Office
Operations Excellence: Journal of Applied Industrial Engineering
Magister Teknik Industri Universitas Mercu Buana
Jl. Raya Meruya Selatan No. 1 Kembangan Jakarta Barat
Email: [[email protected]]
Website: http://publikasi.mercubuana.ac.id/index.php/oe
Journal DOI: 10.22441/oe

The Journal is Indexed and Journal List Title by:

      

 

 

Operations Excellence: Journal of Applied Industrial Engineering is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.