Optimasi Penempatan Gardu Distribusi Sisip CS3 Menggunakan Metode Buffering Gardu Pada Mapping Jaringan Pelanggan di PT PLN (Persero) UID Banten UP3 Cikupa
DOI:
https://doi.org/10.22441/jte.2020.v11i3.007Kata Kunci:
Gardu distribusi, gardu sisip, jatuh tegangan, metode bufferingAbstrak
Permasalahan listrik yang sering dialami oleh pelanggan yang terletak di ujung jaringan yaitu tegangan yang diterima relatif lebih rendah. Jatuh tegangan mengakibatkan peralatan listrik milik pelanggan tidak dapat difungsikan dengan maksimal hingga menyebabkan kerusakan pada peralatan listrik. Pada penelitian ini gardu yang mengalami jatuh tegangan adalah Gardu Distribusi CS3 yang melayani konsumen umum wilayah PT. PLN (Persero) UP3 Cikupa, tepatnya di Kp Solear Ds. Solear. Untuk mengatasi permasalahan tersebut dilakukan pembangunan gardu sisip dengan menggunakan metode buffering sehingga dapat direncanakan lokasi yang tepat untuk pemasangan gardu sisip dan wilayah jangkauan gardu. Berdasarkan hasil penelitian menggunakan metode buffering didapatkan prosentase jatuh tegangan sebelum pemasangan gardu sisip sebesar 28.8% untuk phasa R, 30.9% untuk phasa S, 29.4% untuk phasa T. Setelah dilakukan pemasangan gardu sisip nilai jatuh tegangan menjadi 3.2% untuk phasa R, 1.8% untuk phasa S, dan 1.8% untuk phasa T.
Unduhan
Referensi
S. Azzahra, O. Handayani and S. Auliya. “Studi Perbaikan Jatuh Tegangan dan Rugi Daya pada Jaringan Tegangan Rendah dengan Pembangunan Gardu Sisip Tipe Portal.” Jurnal. Sekolah Tinggi Teknik PLN. Jakarta, (2019)
Kelompok Pembakuan Bidang Transmisi dengan Surat Keputusan Direksi Perusahaan Umum Listrik Negara: Standar Perusahaan Listrik Negara Tegangan – tegangan Standar SPLN I : 1995. PT Perusahaan Listrik Negara (Persero). Jakarta, 1995.
Kelompok Kerja Standar Kontruksi Disribusi Jaringan Tenaga Listrik dan Pusat Penelitian Sains dan Teknologi Universitas Indonesia: Standar Konstruksi Gardu Distribusi dan Gardu Hubung Tenaga Listrik. PT Perusahaan Listrik Negara (Persero). Jakarta, 2010.
D. Kurniawan, “Analisis Perbaikan Tegangan Ujung Dengan Membangun Gardu Sisip di PT PLN (Persero) Area Serpong”. Universitas Mercu Buana Jakarta, 2017.
K. Naim. “Analisa Rugi Daya Dan Jatuh Tegangan Pada Sistem Distribusi Tegangan Rendah Area BTN Hamzy Dan BTN Antara.” Jurnal Politeknik Negeri Ujung Pandang Makasar. 2016
E. K. Prahasta, “Sistem Informasi Geografis Konsep-konsep Dasar”. Bandung, 2009
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
